Innovative 9049 Manuale utente

Model 9049 CRT Monitor Arm

Installation Instructions

Innovative Ofﬁce Products, Inc. | 100 Kuebler Road | Easton, PA 18040

800.524.2744 | [email protected] | © Innovative Ofﬁce Products, Inc. 2004

Ergonomic Mounting solutions for monitors and keyboards.

IOP-503189

Your assembly and modiﬁcations are complete. If you need additional

assistance regarding this product please contact our customer service

department at 800.524.2744.

Trouble-shooting & F. A. Q.

Q. How does the monitor platorm tilt?

A. Depending on the monitor platform you selected, platform tilt may not

be available.

Q. Why can’t I push my arm down into the horizontal position?

A. The monitor must be on the platform for the arm to move.

Q. The friction joints do not loosen/tighten.

A. Be certain that you are turning left (counter-clockwise) to loosen and

right (clockwise) to tighten. (Opposite of counter-balance adjustment)

Q. Why does the arm drift upward/downward after the counter-balance

has been set?

A. This will happen if the mount is not perfectly level. A good rule of

thumb is to keep the mount joint loose while the platform forearm

joint is snug.

Q. Can I download these instructions?

A. All product instructions are available on our website; www.LCDarms.com

Q. How do I return my monitor arm?

A. You can obtain a return authorization number (RMA) by contacting our

customer service department at 800.524.2744. All returned items must

be accompanied by an RMA.

Step 1 Attaching the Arm to the Mount

Before beginning, please be

certain that the mount is secure

on the surface.

Insert the shaft of the arm

assembly into the mount.

Step 2 Attach Monitor Platform to the Arm

Remove platform from wrap. Unscrew the four 1/4” x 20 Philips ﬂat head

screws from the tilt or non tilt base found at the end of the forearm.

Place the platform on top of the non tilt base, line up the screw hole pattern

and replace the screws and tighten.

Step 3 Adjustments

non-tilt base

Forearm

With the CRT monitor on the platform,

push the arm into a horizontal position,

insert the 1/4” allen wrench.

To increase the strength, turn the

wrench left (counter-clockwise). To

decrease the strength, turn the wrench

to the right (clockwise).

When the arm does not drift up or

downward, your adjustment is set.

A - Counter-Balance - assistance may be needed

1 - Friction Joint

B - Friction Joints

Friction joints are found in the (1) mount, where the (2) forearm elbows

with the main body of the arm and (3) where the platform attaches to the

end of the forearm.

Insert the 3/32” allen wrench into the set screw and tighten or loosen to the

desired degree of friction. (Left to loosen - Right to tighten)

2 - Friction Joint

3 - Friction Joint

Indice

Altri manuali Innovative Rack e supporto

Innovative

Innovative PTS-04-M400/MX915 Manuale utente

Innovative

Innovative Busby 8451 Manuale utente

Innovative

Innovative 8520 Manuale utente

Innovative

Innovative Ella Manuale utente

Innovative

Innovative 8408 Manuale utente

Innovative

Innovative 7020 Manuale utente

Innovative

Innovative EVO 5900 Manuale utente

Innovative

Innovative STAXX Series Manuale utente

Innovative

Innovative 8519 Manuale utente

Innovative

Innovative UltraRack URPS Manuale utente

Innovative

Innovative Winston Lift Single Manuale utente

Innovative

Innovative 9400 Manuale utente

Innovative

Innovative 5501 Manuale utente

Innovative

Innovative 9232-DC Manuale utente

Innovative

Innovative LCD Monitor Arm 9103 Manuale utente

Innovative

Innovative WINSTON-E Series Manuale utente

Innovative

Innovative PTS-04-LANE Manuale utente

Innovative

Innovative Winston Lift Single Manuale utente

Innovative

Innovative Ella Manuale utente

Innovative

Innovative 7011 Manuale utente

Innovative

Innovative HAT Collective WINSTON-E Triple Manuale utente

Innovative

Innovative MAX Manuale utente

Innovative

Innovative 9047 Manuale utente

Innovative

Innovative 9120 Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente