Intek HR-2040 Manuale utente
OWNER'S MANUAL
AMATEUR RADIO
DUAL BAND MOBILE TRANSCEIVER
144-146 MHz VHF FM 50W
430-440 MHz UHF FM 40W
PC PROGRAMMABLE
Notice
RoHS
2002/95/EC
0700
NOTICE !
It is recommended to carefully read this owner’s manual before using the product. This will also help the user to prevent using the radio in violation of the regulations
valid in the country where the product is used, as well as to avoid any possible interferences with other services.
NOTICE !
This transceiver is programmable via PC, using the dedicated software (free download at www.intek-radios.com) and the PC interface cable (optional
item). Any programming or modification of the original default setting must be made by a specialised technician or by an authorised service centre. Some
functions of this transceiver might be programmed in violation of the technical rules in force for the use of the VHF and UHF FM bands. It is the user’s
responsibility to check that any modification to the programming will be done in compliance with the current regulations. Any modification to the product,
alteration of the internal circuit, of the external structure of the radio or any programming in violation of the current regulations will automatically void the
product certification and your right to use the product. INTEK S.R.L. declines any responsibility concerning any modification of the product, made by the
user or by a third party, after delivery of the product.
NOTICE !
This transceiver has been factory programmed, in order to use the product immediately after purchase. The programming includes the activation of
channels/frequencies in the VHF and UHF FM Amateur Bands, according to the technical rules in force for the use of this bands.
General Information
Thank you !
Thank you for choosing INTEK for your amateur radio applications. This user friendly transceiver will provide you with clear and reliable communications
and will keep your professional activities at peak efficiency. This transceiver incorporates the latest and most advanced technology, so you will be pleased
with its quality and its technical features.
Important notice !
The use of VHF and UHF FM transceivers is subject to the regulations applied in the country where the product has to be used. As regulations are usually
subject to possible modifications, please check the current regulations in your country with your dealer or local supplier. INTEK does not take any
responsibility for illegal use and operation of this product not in accordance with the regulation of the country where the product is used.
Safety notice
The user must know and understand the common risks related to the use of transceivers. Do not use the transceiver in environments at risk of explosion
(where there are gas, dusts, smokes, etc.). Do not use the transceiver in service areas or fuel stations, on board aircrafts, etc.
Cautions
Please observe the following precautions, in order to avoid causing fire, personal injuries or damage to the radio:
It is suggested that each transmitted message lasts a few minutes only, since very long transmissions at the maximum transmitter RF output power
may overheat the transmitter.
Do not alter or modify in any way your transceiver.
Do not expose the transceiver for a long time to direct sunlight and do not place it close to heat sources.
Do not expose the transceiver to excessively dusty or damp places, do not place it on unstable surfaces.
In case of anomalous smell or smoke that leaks out from the transceiver, turn it off immediately. Please contact an authorised service center.
Please observe the following precautions to prevent fire, personal injury, or transceiver damage:
Do not attempt to configure your transceiver while driving,it is dangerous.
This transceiver is designed for a 13.8V DC power supply. Don't use a 24V battery to power on the transceiver.
Do not place the transceiver in excessively dusty, humid or wet areas, nor unstable surfaces.
Please keep it away from interferential devices (such as TV, generator etc.)
Do not expose the transceiver to long periods of direct sunlight nor place it close to heating appliances.
If an abnormal odor or smoke is detected coming from the transceiver, turn OFF the power immediately. Contact a service station or your dealer.
Do not transmit with high output power for extended periods; the transceiver may overheat
General Information
Important notice !
The use of VHF and UHF FM transceivers is subject to the regulations applied in the country where the product has to be used. As regulations are usually subject
to possible modifications, please check the current regulations in your country with your dealer or local supplier. INTEK does not take any responsibility for illegal
use and operation of this product not in accordance with the regulation of the country where the product is used.
User Information
in accordance with art. 13 of the Legislative Decree of 25th July 2005, no. 15 ”Implementation of Directives 2002/95/EC, 2002/96/EC and 2003/108/EC, relative to reduction of the use of hazardous
substances in electrical and electronic equipment, in addition to waste disposal”.
The crossed bin symbol shown on the equipment indicates that at the end of its working life the product must be collected separately from other waste.
The user must therefore take the above equipment to the appropriate differentiated collection centres for electronic and electro technical waste, or return it to the dealer when purchasing a new
appliance of equivalent type, in a ratio of one to one.
Appropriate differentiated waste collection for subsequent recycling, treatment and environment-friendly disposal of the discarded equipment helps to prevent possible negative environmental and health
effects and encourages recycling of the component materials of the equipment.
Illegal disposal of the product by the user will be punished by application of the administrative fines provided for by the legislative decree no. 22/1997 (article 50 and following of the legislative decree no.
22/1997).
CONTENTS
New and Innovative Features...................................................1
Frequency Range ...................................................................1
Supplied Accessories / Optional Accessories............................ 2
Supplied Accessories..............................................................2
Optional Accessories ..............................................................2
Initial Installation .......................................................................3
Mobile installation ...................................................................3
DC Power Cable Connection ..................................................4
Antenna Connection ...............................................................6
Accessories Connections........................................................7
Getting Acquainted..................................................................... 8
Front panel..............................................................................8
Rear panel ..............................................................................9
DISPLAY .................................................................................9
microphone ...........................................................................10
Basic Operations.....................................................................11
Switching The Power On/Off................................................. 11
Adjusting The Volume ..........................................................11
Switch between VFO and Channel mode ............................. 11
Adjusting Frequency .............................................................11
Adjusting Channel.................................................................11
Switch Between Main Band and Sub band...........................12
Selecting the frequency band ...............................................12
Receiving ..............................................................................12
Squelch Off/Squelch Off Momentary.....................................12
Transmitting ..........................................................................12
Shortcut Operations................................................................13
Squelch level Setup ..............................................................13
Transmit DTMF/2-TONE/5-TONE signaling .........................13
High/Mid/Low Power Switch .................................................13
Frequency Reverse...............................................................13
Band-width Selection ............................................................13
HOME Channel.....................................................................13
Hyper Memory Channel ........................................................13
Dual Watch............................................................................14
Emergency Alarm..................................................................14
Channel/Frequency Scan .....................................................14
Channel Scan Skip ...............................................................14
Channel Edit .........................................................................14
Scan range Limit ..................................................................14
Channel Copy .......................................................................14
Channel Delete .....................................................................15
General Setting........................................................................16
APO (Automatic Power off)...................................................16
Automatic offset ....................................................................16
Frequency Channel Step Setup............................................16
VFO Band lockout.................................................................17
Beep Function.......................................................................17
CPU Clock frequency Change ..............................................17
2-TONE Encode select..........................................................17
5-TONE Encode select..........................................................18
Add Optional signaling ..........................................................18
CTCSS encode Setup ..........................................................18
CTCSS decode Setup...........................................................19
Sub Band Display Setup .......................................................19
DTMF Encode Pre-Loading time ..........................................19
DTMF Encode Transmitting Time .........................................20
DTMF Encode setup .............................................................20
Squelch Mode Setup.............................................................20
Compander ...........................................................................21
Scrambler Setup ...................................................................21
Tone Bust (Pilot Frequency)..................................................21
Keypad Mode Setup .............................................................22
Keypad Lockout ....................................................................23
TX OFF (PTT Lockout) .........................................................23
Squelch Level setup..............................................................23
Frequency Reverse .............................................................. 23
Sub band mute setup............................................................24
Editing Channel Name ..........................................................24
Channel Function Auto storeage Setup ................................24
Microphone PA,PB, PC,PD key setup ..................................25
RF Squelch level setup .........................................................25
OFFSET Direction setup.......................................................25
Scan Dwell Time Setup.........................................................25
Priority channel scan.............................................................26
Offset frequency Setup .........................................................26
Display mode Setup..............................................................26
Busy Channel Lockout ..........................................................27
Radio's DTMF SELF ID ENQUIRY .......................................27
5TONE SELF ID ENQUIR ....................................................27
TOT (Time-out timer) ............................................................27
VFO Frequency Linkage .......................................................28
Wide/Narrow band ................................................................28
Cross Band repeat ................................................................28
LCD backlight........................................................................28
Keypad backlight brightness .................................................29
Calling Record ......................................................................29
AM Function..........................................................................29
Automatic AM function ..........................................................29
VHF External speaker port....................................................29
BEEP Volume control 30
Talk Around ..........................................................................30
Microphone Speaker ............................................................30
........................................................... 30
Password Function ...............................................................30
Microphone Operation ............................................................31
Send DTMF signaling ...........................................................31
Main/Sub band switching ......................................................31
Function operation through PA-PD keys...............................31
Resume Factory Default ........................................................ 33
Programing Software Installing and Starting (in Windows
XP system) ...............................................................................34
Install USB Cable Driver Programme ...................................34
Maintenance.............................................................................35
Trouble Shooting
Default value for factory resume ...........................................35
Declaration of Conformity .....................................................39
...................................................................35
Specification ............................................................................36
Attached Chart.........................................................................37
Notes ....................................................................................... 40
51 groups CTCSS Tone Frequency(Hz) ...............................37
1024 groups DCS Code........................................................37
CONTENTS
1
1
HR-2040 Mobile Radio has nice housing, stoutness & stability, advanced and reliable functions, perfect & valuable. This amateur mobile radio
especially designs for drivers and it pursues company philosophy of innovation and practicality. More functions as follows:
758 memory channels, full duplex operation with independent volume and squelch controls.
50 Watts of power output on the VHF band and 40 Watts on the UHF band with cross band repeater function.
Four independent receiving bands, consist of UU, UV,VU,VV for dual receive and dual output, plus receiving for AM/FM signal of air band,
Marine band, PMR, etc; able to receive FM/TV radio and analogue TV signal.
Display on a large LCD with adjustable brightness, convenient for nighttime use. There are Amateur operation mode and Professional operation
mode for option.
Distribute buttons reasonably, convenient for operation. Adopt superior quality material, better technology and direct-flow heat sink to ensure
stable and durable operation.
758 programmable memory channels, identified by editing name.
Programming different CTCSS, DCS, 2-Tone, 5-Tone in per channel, rejecting extra calling from other radios.
Various scan functions including CTCSS/DCS Scan function.
Using 5-Tone to send Message, Emergency alarm, Call all, ANI, Remotely kill, Remotely Waken, etc.
Automatic calling ldentification function by DTMF--ANI or 5-Tone--ANI.
Multi groups of fix scrambling and 2 groups of self define scrambling.
Compander function for decrease the background noise and enhance audio clarity, it can set compander ON/OFF per channel.
Different band width per channel, 25K for wide band, 20K for middle band ,or 12.5K for narrow band.
Theft alarm provides extra safety.
Frequency Range (*)
RX: 108-180 MHz (AM/FM) TX: 136-174 MHz
220-260 MHz 400-490 MHz
350-399.995 MHz
400-490 MHz
New and Innovative Features
2
2Supplied Accessories / Optional Accessories
SUPPLIED ACCESSORIES
OPTIONAL ACCESSORIES
After carefully unpacking the transceiver, identify the items listed in the table below. We suggest you keep the box and packaging.
Transceiver
Spare Fuses User Manual
Mobile Mounting
Bracket
DC Power Cable with
Fuse Holder
Microphone (QHM-05)
(with DTMF keyboard) S-Washer
Hardware Kit for Bracket
Black screws
(M4X8mm)
4PS
Tapping screws
(M5X8mm)
4PS
USB Programming
Cable (D-2040)
Regulated Power supply
(SPA-8230)
External Speaker
(SP-02)
External Speaker
(FSP-10 / FSP-20 / FSP-30 / FSP-50)
3
3
MOBILE INSTALLATION
To install the transceiver, select a safe, convenient location inside your
vehicle that minimizes danger to your passengers and yourself while the
vehicle is in motion. Consider installing the unit at an appropriate position
so that knees or legs will not strike it during sudden braking of your
vehicle. Try to pick a well ventilated location that is shielded from direct
sunlight.
Install the mounting bracket in the vehicle using the supplied self-
1.
tapping screws (4pcs) and flat washers (4pcs)
Position the transceiver, then insert and tighten the supplied hexagon
2.
SEMS screws.
Car body
Mounting bracket
Washer (M5)
Tapping screw
(M5X20mm)
Double check that all screws are tightened to prevent
vehiclevibration from loosening the bracket or transceiver.
Initial Installation
Determine the appropriate angle of the transceiver, using the 3
screw hole positions on the side of the mounting bracket.
4
3Initial Installation
DC POWER CABLE CONNECTION
Locate the power input connector as close to the transceiver as possible.
MOBILE OPERATION
The vehicle battery must have a nominal rating of 12V. Never
connect the transceiver to a 24V battery. Be sure to use a 12V
vehicle battery that has sufficient current capacity. If the current
to the transceiver is insufficient, the display may darken during
transmission, or transmitting output power may drop excessively.
Route the DC power cable supplied with the transceiver directly
1.
to the vehicle's battery terminals using the shortest path from the
transceiver.
We recommend you do not use the cigarette lighter socket
as some cigarette lighter sockets introduce an unacceptable
voltage drop.
The entire length of the cable must be dressed so it is isolated
from heat, moisture, and the engine secondary (high voltage)
ignition system/ cables.
After installing cable, in order to avoid the risk of damp, please
2.
use heat-resistant tap to tie together with fuse box. Don't forget
to reinforce whole cable.
In order to avoid the risk of short circuit, please cut down
3.
connection with negative (-) of battery, then connect with radio.
Conf rm the correct polarity of the connections, then attach the
4.
power cable to the battery terminals; red connects to the positive
(+) terminal and black connects to the negative (-) terminal.
Use the full length of the cable without cutting off excess even
if the cable is longer than required. In particular, never remove
the fuse holders from the cable.
Reconnect any wiring removed from the negative terminal.
5.
Connect the DC power cable to the transceiver's power
6.
supplyconnector.
Press the connectors firmly together until the locking tab clics.
Red
Black
Ext. Power jack
DC power cable
NOTE
Indice
Altri manuali Intek Ricetrasmettitore
Intek
Intek MT-3030 Manuale utente
Intek
Intek M-130 PLUS Manuale utente
Intek
Intek T100WP Manuale utente
Intek
Intek M-795 Manuale utente
Intek
Intek SL-02 Manuale utente
Intek
Intek M-760 PLUS Manuale utente
Intek
Intek H-510 PLUS Manuale utente
Intek
Intek MT-5050 Manuale utente
Intek
Intek KT-950EE Manuale utente
Intek
Intek KT-930EE Manuale utente
Intek
Intek MT-4040 Manuale utente
Intek
Intek M-899 VOX Manuale utente
Intek
Intek HR-200S Manuale utente
Intek
Intek M-799 Power Manuale utente
Intek
Intek HR-5500 Manuale utente
Intek
Intek M-60 Plus Manuale utente
Intek
Intek TM-200S Manuale utente
Intek
Intek M-100 PLUS Manuale utente
Intek
Intek KT-370EE Manuale utente
Intek
Intek M-550 Power Manuale utente
