Dear customer:
Thanks for your purchase. Please read these
instructions before installation and keep it
for installation and usage or any other
further reference.
1. Please cut off the power and clean the shell with natural detergent
when it is dirty. The acid and alkalescent bathroom detergent and BEN,
lacquer thinner, abrasive, etc. are forbidden. Also, do not use nylon
brush to avoid scratching;
2. When cleaning the shell prevent the water droplets getting into the
machine so as to avoid electric shock or short circuit;
3. It's better to cut off the power when off duty to extend the service life;
4. If the power cord is damaged, it should be replaced by the
manufacturer, its service agents or similar qualified person;
5. If the machine breaks down, cut off the power; please commission a
professional to repair it.
1. The product guarantee period is 3 years.
2. The guarantee period for products came into effect from
the date of buying the machine.
3. The following are not covered by the guarantee:
Improper use and the fault caused by demolition, alteration
and repair by technical persons without our company
authorisation.
Fires, earthquakes, thunder and other natural disasters
causing faults, and abnormal voltage.
The faults caused by non matching power.
The faults caused by long time operation in bad working
condition.
Attention: If the air flow becomes weaker, please
clean the filter screen. Do not use water.
Unlock the filter screen and use
the ridge in the middle of the
filter cartridge to pull and remove.
Get the filter from
the filter cartridge.
Put the filter at the right
position in the filter
cartridge, and insert the
filter cartridge into the
body.
Clean the dust on the filter, do not wash.
If there is too much dust, please replace its filter.
1. It is equipped with an automatic infrared ray induction system,
very easy to use, reducing waste, and no touching, which
effectively avoids pathogen cross infection and re-contamination.
2. It has outstanding performance with most advantage chip
control technology and infrared sensor.
3. It has unified high speed motor with RPM of 24,000.
4. This series product comes with over current protection, which
effectively eliminates accidents.
5. Easy to install. It is suitable for all departments in hospitals,
school, food and pharmaceutical manufacturers, airports, office
buildings, hotels, government agencies and research
institutions and other places.
Air Speed
Air outlet
1. Do not install it above stainless steel or other shining surface location,
otherwise prone to misoperation.
2. The body should be firmly fixed to the smooth wall to avoid injuries caused
by the decline of product or product damage.
3. Do not install the products in such place with corrosivevor flammable gases
or objects, it may cause fire or product failure and malfunction.
4. Do not install the products in such environment with multi dust or in high
temperature, it may cause product damage.
1. Do not fix in locations where the unit is likely to be splashed by excessive
water in order to avoid electric shock.
2. You must commission a professional electrician to install or else it has
electric shock hazard.
3. You must cut off power before installation and maintenance.
4. Do not dismantle, repair or make alterations to this machine without
authorisation, otherwise there is a risk of electric shock, fire and other
accidents.
