Intermec IV6 Manuale utente

Quick Start Guide

IV6 Portable

Reader

2 IV6 Portable Reader

Intermec Technologies Corporation

Corporate Headquarters Technical Communications

6001 36th Ave. W. 550 Second Street SE

Everett, WA 98203 Cedar Rapids, IA 52401

U.S.A. U.S.A.

www.intermec.com

The information contained herein is proprietary and is provided

solely for the purpose of allowing customers to operate and

service Intermec-manufactured equipment and is not to be

released, reproduced, or used for any other purpose without

written permission of Intermec.

Information and specifications contained in this document are

subject to change without prior notice and do not represent a

commitment on the part of Intermec Technologies Corporation.

E2003-2005 by Intermec Technologies Corporation. All rights

reserved.

The word Intermec, the Intermec logo, Norand, ArciTech,

CrossBar,DataCollectionBrowser,dcBrowser,Duratherm,

EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder,

Fingerprint, i-gistics, INCA (under license), InterDriver,

Intermec Printer Network Manager, IRL, JANUS, LabelShop,

Mobile Framework, MobileLAN, Nor*Ware, Pen*Key,

Precision Print, PrintSet, RoutePower, TE 2000, Trakker

Antares, UAP, Universal Access Point, and Virtual Wedge are

either trademarks or registered trademarks of Intermec

Technologies Corporation.

Throughout this manual, trademarked names may be used.

Rather than put a trademark (™or ®)symbolinevery

occurrence of a trademarked name, we state that we are using

the names only in an editorial fashion, and to the benefit of the

trademark owner, with no intention of infringement.

Microsoft, Windows, and the Windows logo are registered

trademarks of Microsoft Corporation in the United States

and/or other countries.

Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

IV6 Portable Reader

There are U.S. and foreign patents pending. This paroduct is

covered by one or more of the following patents:

4,360,810 4,739,328 4,786,907 4,864,158

4,888,591 4,999,636 5,030,807 5,055,659

5,280,159 5,504,485 5,521,601 5,550,547

5,673,037 5,763,867 5,777,561 5,825,045

5,828,318 5,828,693 5,850,181 5,850,187

5,942,987 5,995,019 6,078,251 6,121,878

6,122,329 6,172,596 6,195,053 6,249,227

6,280,544 6,286,762 6,286,763 6,288,629

6,360,208 6,384,712 6,404,325 6,429,775

6,486,769 6,501,807 6,525,648 6,639,509

6,645,327 6,677,852 6,768,414 6,784,789

6,816,063

4 IV6 Portable Reader

Packing List

Ensure you have received these items:

SIV6 Portable Reader Quick Start Guide

STwo band clamps

SWarranty card

SCompliance statement

Introduction

The Intellitag IV6 Integrated Portable Reader Antenna provides

the option for serial RS-232 and Bluetooth communications.

Host Requirements

Operating System Support

Microsoft Windows 98 or greater. This requires that Micro-

soft Foundation be installed. Microsoft Foundation files can

be located at http://www.microsoft.com. Once configured

your IV6 Portable Reader also works in Windows 95.

Compiler Support

MS-DOS Development

SMicrosoft C compiler version 6.0 or greater

SBorland C ++ compiler version 4.5x or greater

DOS API Library Names (p/n A110015-01) are:

S<rfidl.lib> for large model development

S<rfidh.lib> for huge model development

Microsoft Windows Development

SIDK Kit ITRK915001, includes all necessary software, 915

MHz reader, training and documentation.

Minimum Hardware Requirements for Target Device

S640K RAM

SMinimum Intel 386 compatible processor

IV6 Portable Reader

General Requirements

This product conforms to government

regulations. The user(s) of this product are

cautioned to use power sources, accessories and

peripherals approved by Intermec Technologies

Corporation. The use of power sources and

accessories other than those recommended, or

changes to this product that are not approved by

Intermec Technologies Corporation, may void the

regulatory compliance of this product and may

result in the loss of the users authority to operate

the equipment.

Power Requirements

Your IV6 Portable Reader is powered by an external DC power

applied to a dedicated connector. The IV6 can only be used

with UL approved limited power supply (p/n: 851-070-001)

and power cable kit (p/n: 203-714-001)

The external DC power configuration is intended to support

primarily mobile applications for the IV6 Reader where no

cabled network connection is possible.

External DC Power

Input Current 1 Amp max.

Input Voltage 12V DC +/- 10%

Output Voltage 12V @ 250 mA max.

6 IV6 Portable Reader

IV6 Reader LEDs

Review the front panel LEDs to become familiar with the status

indications you will receive from your Reader.

Auxiliary I/O connector

LEDs position

(lefttoright)1,2,3,4,5

Mounting bracket(s)

oneoneachend

IV6 Fixed Reader LED Explanation

LED Meaning

1IRI (Blue)

Off -Default state, unit is not ready to operate. Either because it

does not have power or fails internal checks.

Blink - Unit ready but not connected to system.

On - System OK, Ready.

2Power Indicator (Green) On if Reader has appropriate external

power and all internal supplies are functional.

3HostCommunications(Green)Blinksonwheneverdataisde-

tected on the host interface.

4RF Power (Green) LED is ON whenever the module is providing

RF power.

5Tag Identification (Green) LED blinks ON when a valid tag is

detected.

IV6 Portable Reader

Installation

Your IV6 Portable Reader can be installed using several options.

For example, you can use band straps and mount it to the front

of the fork lift, or to the side of the beams supporting the lift

mechanism. The illustration below shows placement in some

typical configurations.

Installation Guidelines

Note: RF safety regulations require a 20 cm (8 in)

distance from the antenna to any persons body or

head. Do not touch the antenna while the transmit-

ter is powered. Regulations do not allow co-location

with other transmitters.

1Position your Reader to ensure it will get the best read rate

possible for your situation.

2Attach your Reader to the bracket using band clamps. Attach

one band to each mounting bracket.

IV6 Reader

8 IV6 Portable Reader

RFID Performance

RFID Tag Depth of Field

The read range is dependent upon the type of tag and the trans-

mitted output power, besides many other factors. The tag rates

containedinthisdocumentarewhatcouldbeexpectedusinga

theoretical free-space dipole tag at 915 MHz under U.S. FCC

Part 15 rules and regulations.

Typical Read and Write Range

SRead Range: 6-10 feet

SWrite Range: Writing distances are 60% of the read distance

under the same conditions.

Environmental Specifications

Operating Temperature -20°Cto+55°C(-4°F to +131°F)

Storage Temperature -30°C to +70°C(-22°F to +158°F)

Thermal Shutdown 70°C (158°F) measured on the power amplifier

Thermal Cycle -20°Cto+50°C(-4°F to +122°F) ramp 5°C/

min.

Thermal Shock

Non Operating

-30°C to +70°C(-22°F to +158°F)

ramp 30°C/min.

Humidity, Storage and Op-

erating

5% to 95% PH Non-condensing

Moisture Resistance IP65 Compliant

Dust Resistance IP65 Compliant

UV Radiation ETSI EN 300 019-1-4 Class 4E

Solar ETSI EN 300 019-1-4 Class 4E

Quasi-Random Vibration Quasi-Random 20 G’s RMS for 4 hours.

Shock 10g, 11ms, 1/2 Sin, (operating)

Vibration 1.0 GRMS., 10 to 500 Hz, 3 axis (operating)

Mechanical Shock 10 G, 11 msec, half sine pulse (operating)

IV6 Portable Reader

Safety and Regulatory Approvals

Safety IEEE 95.1 RF Safety Requirements. Approved to

UL 60950, CE, Cenelec 210 and 211 safety re-

quirements. UL listed, C22.2 No 950/ UL

60950. FCC Electromagnetic Fields per Bulletin

65. Health Canada, Safety Code 6.

Electromagnetic Emissions FCC Part 15, Class A - verified EN 55022,

Industry Canada ICES-003

High Efficiency Fluorescent Reader will read at 150 V/m at 25 KHz.

Radiated Immunity EN 55024

Radio Standards FCC 15.247

Industry Canada RSS-210

Portable Reader Specifications

915 MHz Antenna Specifications

Frequency Range 902-928 MHz

Impedance 50 ohms

VSWR <1.3:1

Polarization Circular

Front-to-Back Ratio >30 dB

Maximum Input Power 1wattat50°C

Far Field 3 dB Beam-

widths (Nominal)

70°x 35°

Mounting Hardware Band Clamps

10 IV6 Portable Reader

General Purpose I/O

Your IV6 Portable Reader supports a GPIO interface that con-

sists of an industrial circular style female connector supporting

the interface to industrial type controls. The interface includes:

STwo optically isolated inputs.

STwo optically isolated low voltage DC outputs.

SAccess to 12 V DC to power external relays for the control of

AC loads, indicators, or other devices requiring up to 250

mA maximum current.

A cable assembly, Intermec part number 236-040-001 is re-

quired for use with the industrial circular style connector. The

individual wires in the cable are color coded as indicated in the

GPIO Pin Function/Assignment Table. The cable drain wire

corresponds to the “PE” contact of the connector.

GPIO Pin/Function Assignment Table

Pin # Function Active Polarity Cable Color

16 INPUT-1P High 10-48V Orange/White

14 INPUT-1N Low-RTN Brown/White

13 INPUT-2P High 10-48V Black/White

12 INPUT-2N Low-RTN Light Green

15 12 Volt OUTPUT-1 Red/White

4OUTPUT-1 RETURN Orange

6OUTPUT-1P High 0-12V Green

5OUTPUT-1N Low-RTN Yellow

17 12 Volt OUTPUT-2 Black/Yellow

11 OUTPUT-2 RETURN Pink

9OUTPUT-2P High 0-12V Gray

10 OUTPUT-2N Low-RTN White

1RS232 TX Black

2RS232 RX Brown

3RS232 RTN Red

812 Volt INPUT Purple

7INPUT RETURN Blue

Altri manuali per IV6

Indice

Altri manuali Intermec Lettore di codici a barre

Intermec

Intermec SR61B Manuale utente

Intermec

Intermec SF51 Manuale utente

Intermec

Intermec IF30 Manuale utente

Intermec

Intermec EasyCoder PD41 Manuale utente

Intermec

Intermec 3400 Manuale utente

Intermec

Intermec Janus 2010 Manuale utente

Intermec

Intermec IV7 Manuale utente

Intermec

Intermec IV7 Manuale

Intermec

Intermec IP4 Manuale

Intermec

Intermec SG20T Manuale utente

Intermec

Intermec IP30 Manuale utente

Intermec

Intermec ScanImage 1470 Manuale

Intermec

Intermec IF5 Manuale utente

Intermec

Intermec ScanPlus 1802 Manuale utente

Intermec

Intermec EasyCoder F4 Guida

Intermec

Intermec 1009FF01 Manuale utente

Intermec

Intermec SR30 Manuale utente

Intermec

Intermec IV6 Manuale utente

Intermec

Intermec Sabre 1553 Guida alla configurazione

Intermec

Intermec SR61T Manuale utente

Intermec

Intermec IP4 Manuale utente

Intermec

Intermec SR31T Manuale utente

Intermec

Intermec SR61 Manuale utente

Intermec

Intermec SR61XR Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente