Intermec 751G Manuale utente
Quick Start
751G
Mobile
Computer
Guide
Alpha
2 751G Alphanumeric Mobile Computer Quick Start Guide
Thank you for purchasing the Intermec 751G Se-
ries Color Mobile Computer. You will find your 751G
Computer useful in a variety of data collection and
data management applications. Its integrated peripher-
als and rugged design ensure reliable service for years
to come.
This guide provides information needed to get started
using your 751G Computer. For more detailed infor-
mation refer to “Where to Find More Information” of
this guide.
Note that the hardware configuration of your 751G
Computer may differ from the descriptions in this
guide. Software operation descriptions are based on
factory defaults.
Your 751G Alphanumberic Computer is available as a
batch (store and forward) device and with a radio for
direct communication with the host computer. You
can distinguish which your device is by the label on
the back. The batch model is 741G7200EB16S000
and the radio model is 751G7200EB16S804.
3751G Alphanumeric Mobile Computer Quick Start Guide
Contents
751G Computer Mobile Computer
Description 5.........................
Setting Up Your 751G Computer 7..........
Non-Incendive (NI) Cautions 8..............
Learning About The Keypad 8...............
Gold/White Plane Keys 8...........
Alpha (Blue) Plane Keys-Numeric
Keypad 9......................
Scanning/Keypad Shift and
Notification LED 9.............
Action and Up/Down Navigational
Buttons 9.....................
Battery Status LED 10..............
About Microsoft Windows CE Software 11....
The Desktop Screen 11....................
Start Menu 12....................
Customizing your Desktop 12........
Task Bar 13......................
Pop-up Menus 14.................
Entering Information into Your 751G
Computer 15..................
Warm Resetting Your 751G Computer 16.....
Cold Resetting Your 751G Computer 16......
Troubleshooting 17.......................
Cleaning Your 751G Computer 18...........
Case and Display 18...............
Where to Find More Information 18..........
4 751G Alphanumeric Mobile Computer Quick Start Guide
Radio Use Safety Precautions 19.............
End User License Agreement 20.............
Microsoft Windows CE.Net 20.......
Intermec Technologies Corporation End User
License Agreement 24...................
Global Services and Support 25..............
Warranty Information 25...........
Web Support 25..................
Telephone Support 26.....................
Patent Information 27.....................
5751G Alphanumeric Mobile Computer Quick Start Guide
751G Computer Mobile Computer
Description
Front light
(Gold/White + i)
Gold/White
plane key
On/Off
Navigational keys
(up and down
controls)
Scanning/Alpha
LED
Power status
Ambient light
sensor
Alpha (Blue) plane key
Action button
Battery compartment
Stylus
Hand strap
Speaker
6 751G Alphanumeric Mobile Computer Quick Start Guide
Scanner trigger
Scanner lens
Charging/Docking connector
Microphone
Headset jack
Secure Digital
compartment
ScannertriggerorRe-
corder button
left side of unit
7751G Alphanumeric Mobile Computer Quick Start Guide
Setting Up Your 751G Computer
1Remove 751G Computer from its packaging.
2Release hand strap and connector cover.
Slide bottom of strap forward
to release from the retaining
slot.
Remove the two thumb
screws on the connector
cover to remove the cover
and that part of the hand
strap.
Thumb screws
3Install battery and reattach hand strap and connec-
tor cover.
3a
Tilt, insert, and place battery into
compartment.
Ensure battery compartment latch clicks so battery is
secure in compartment.
Battery compartment latch
Battery compartment
Battery pack
3b
8 751G Alphanumeric Mobile Computer Quick Start Guide
4Insert your 751G Mobile Computer into the 751G
Single Dock for charging.
5Charge battery pack (3 hours) before using. How-
ever, to ensure proper charging, perform the re-
maining steps first, with the AC adapter or dock
connected.
6The first time you turn on your 751G Computer it
boots to the operating system. After a few seconds
you see the Windows CE.Net Desktop screen. Tap
your stylus to advance to the next display on the
screen.
7You will be prompted through the several screens to
complete the setup process. Read the display mes-
sages and follow the instructions. When you reach
the Windows CE.Net Desktop screen, you have
completed the setup.
Non-Incendive (NI) Cautions
Do not use the Charger in an NI
environment.
Do not swap or charge batteries in an NI
environment.
Ensure that the Connector door on the
bottom of the unit is in place in an NI
environment.
Learning About The Keypad
Gold/White Plane Keys
The Gold/White cplane keys provide you access to
display controls, special characters, and Windows
CE.Net options.
Press the Gold/White ckey for each gold plane key
stroke you wish to make. For example to turn on the
front light, press and hold the Gold/White ckey
plus the ‘i’ key. To turn the front light off press the
appropriate keys again.
9751G Alphanumeric Mobile Computer Quick Start Guide
Alpha (Blue) Plane Keys-Numeric Keypad
The Alpha (Blue) Fplane keys work a bit differently
than the gold plane keys. When you press the Alpha
key, the Scanning/Alpha CLED lights ‘red’ to indi-
cate Alpha mode. The keypad stays in the Alpha mode
until you press it again.
For example, pressing the Alpha Fkey and the 1
key allows the next letter to be capitalized. Again it
staysinthismodeuntilyoupresstheAlphakeyagain.
If you want to type a ‘c’ press the Fkey and the 2
key three times. If you need a letter that is on the same
key as the last letter entered, wait two seconds after
you pressed the last key then you can enter the correct
series of keystrokes to create the next letter.
Scanning/Keypad Shift and Notification LED
The Scanning/Keypad Shift and Notification LED
Cturns red, or green.
SMomentary Green: Indicates a ‘good scan’.
SBlinking Green: Indicates that the scanner is ini-
tializing.
SSteady Red: Indicates the keypad is shifted to the
Alpha (Blue) plane and the 751G is On.
Action and Up/Down Navigational Buttons
SAction button: Press to open an item (similar to
pressing ENTER on the keypad).
SUp/Down controls: Press to scroll through a list
(similar to pressing the arrow keys on a keyboard).
10 751G Alphanumeric Mobile Computer Quick Start Guide
Battery Status LED
Power to run your 751G Computer is supplied by a
powerful Li-Ion battery pack designed to give you
approximately 6-10 hours of operation (depending on
application). In addition, your 751G Computer con-
tains backup capabilities to prevent loss of data when
the main battery is discharged or when switching out
battery packs.
For maximum effectiveness it is important to leave the
main battery installed in your 751G Computer even if
it is discharged. If the main battery is removed, it
should be replaced within 10 minutes to avoid the
possibility of data loss.Before removing the battery
ensure the 751G Computer is in sleep mode.
The Battery status LED Bturns red, green, or
yellow.
SSteady Green: Battery is more than 95% charged
and unit is on a charger.
SBlinking Red: Battery is low. The speed of the
blinkingincreasesasthebattery’spowergetsin-
creasingly lower.
SRed: Main battery is low, or if charging, will re-
main red until your 751G Computer reaches 95%
charge status.
SYellow: Your 751G Computer is on a charging
source and there is no battery pack installed. Can
also mean that your 751G Computer is out of
charging range 32°to 122°F(0°to 50°C). Once
your 751G Computer gets back in range, charging
resumes and the LED changes to red or green.
SAlternating between Red and Yellow: The battery
pack needs replacing.
Altri manuali per 751G
6
Indice
Altri manuali Intermec Palmare
Intermec
Intermec CN3E Series Manuale utente
Intermec
Intermec CK61 Manuale utente
Intermec
Intermec CK70 RFID Manuale utente
Intermec
Intermec 6640 Manuale per l'uso e la cura
Intermec
Intermec CN50 Manuale utente
Intermec
Intermec Janus 2020 Manuale utente
Intermec
Intermec 700 Series Manuale utente
Intermec
Intermec CK70 RFID Manuale utente
Intermec
Intermec 700 Series 700CNI Manuale utente
Intermec
Intermec CK32IS Manuale
Intermec
Intermec CK70 RFID Manuale utente
Intermec
Intermec CN3E Series Manuale utente
Intermec
Intermec CN3 Series Manuale utente
Intermec
Intermec 700 Series Manuale utente
Intermec
Intermec Oracle-Ready CK31 Manuale utente
Intermec
Intermec CK3a Manuale utente
Intermec
Intermec 6640 Manuale per l'uso e la cura
Intermec
Intermec CK30 Manuale utente
Intermec
Intermec Janus 2020 Manuale utente
Intermec
Intermec Oracle-Ready CK31 Manuale utente
