Interquartz Enterprise 98390 Manuale utente
Model 98390
OPERATING INSTRUCTIONS
1
This Interquartz telephone has been manufactured to very high standards and
is very easy to use. Please read this manual carefully to find out how to use the
features.
Contents
1. Important notes ................................................................................ 2
Intended use ........................................................................................ 2
Telephone facilities ................................................................................ 2
R N Number ......................................................................................... 3
mergency calls .................................................................................... 3
2. Installation .......................................................................................... 4
Connection ............................................................................................. 4
Wall mounting ........................................................................................ 4
3. Telephone Features .......................................................................... 6
4. Operation ............................................................................................ 7
5. PABX & System sage ................................................................... 8
6. Maintenance and Problem Solving ............................................... 9
7. Warranty and Service ...................................................................... 10
Figure 1 General Appearance ........................................................... 3
Figure 2 Wall Mounting ..................................................................... 4
Figure 3 Handset Retainer for Wall Mount ........................................ 5
Figure 4 Bottom View ........................................................................ 6
Figure 5 Recall Switch ...................................................................... 8
2
1. Important Notes
Intended use
This apparatus is intended for use on 2 wire analogue PSTN and PABX circuits
within the United Kingdom.
Declaration of Conformity
I
nterquartz (UK) Limited declares under its sole responsibility that this product
Model: NT RPRIS
Is in conformity with the following relevant harmonised standards
Health & Safety 73/23/ C
lectromagnetic Compatibility 89/336/ C
Following the provisions of Council Directive 1999/5/ C on radio equipment and
telecommunications terminal equipment.
A J Roberts April 2000
Director
Telephone facilities
This telephone has been designed for the use of the following facilities :
- operation in the absence of proceed indication
- recall (earth or timed break selectable)
- MF signalling
- ringer volume control
- ringing indicator
- last number re-dial
3
REN number
The Ren number of this telephone is 1.
If you wish to connect any other equipment to the line, simply add the
R N numbers of each piece together and ensure that the total does not
exceed 4. If too many phones are connected to the line, the circuit may be
overloaded and your telephone may not ring.
Not all telephones have the same R N.
If a British Telecom phone is supplied unmarked, you can assume that it
has a R N of 1
Emergency calls
"999" calls can be made on this telephone, for the purpose of making
calls to the emergency service. An access code may also be required, if
the phone is connected to a PABX.
Figure 1 General Appearance
RING R
INDICATOR
K YPAD
HANDS T
CORD
HANDS T
F ATUR
K YS
4
2. Installation
This telephone is designed to plug straight into a modular style socket. If
you do not have one of these sockets, they can be obtained from your
Network Supplier. A card is included for this purpose. Simply complete it
and send it to your Network Supplier.
Connection
Insert the line cord into the socket. Set the ringer volume control, as
desired.
Wall mounting
Using the template supplied, position it where you want to fix your
telephone. Drill two holes and fix roundheaded screws, leaving them slightly
proud of the surface. Position the telephone over the screws and slide
downwards into place.
FOR WALL
MOUNT
Figure 2 Wall Mounting
5
To enable the handset to be supported in the cradle when the phone is
mounted on the wall, follow the procedure shown in Figure 3 to reserve
the HANDS T R TAIN R.
1. Use your thumb to press the
HANDS T R TAIN R
2. Push the HANDS T R TAIN R
out of the slot
4. Insert the HANDS T R TAIN R
back into it's slot
3. Turn the HANDS T
R TAIN R 180°
Figure 3 Handset Retainer for Wall Mounting
6
3. Telephone Features
Ringer Indicator
Flashes when the telephone rings with an incoming call.
Ringer Volume Switch
Located on the base of the unit (see Figure 4). Move switch to select no
sound (OFF), muted sound (LOW) or full sound (HIGH) for ringing on
incoming call.
Mute Button
Pressing and releasing this button cuts off the handset so that the caller
cannot hear your conversation. The red L D will light indicating that the
mute is on. Pressing and releasing the button a second time will cancel
the mute and return to normal conversation.
If the telephone handset is replaced on the cradle with the mute "on", the
mute will automatically be released when the handset is next lifted.
Figure 4 Bottom View
RING R
HI / LO / OFF
SWITCH
TIM D BR AK /
ARTH R CALL
SWITCH
VOIC M SSAGING
( N / S1 / S2 ) SWITCH
7
Redial / Pause Button
When pressed as the first button
- redials last number dialled
Otherwise, it serves as a pause button inserting a 3.6 second pause in
the number sequence.
4. Operation
To dial a number, lift the handset, wait for the tone and then key in the
number required.
Redial / Pause Function
Redial
If the number dialled is busy, obtain a new line - by replacing the telephone
handset and then lifting it again. Press the button labelled redial/pause
and the last number that you dialled will automatically be redialled.
Pause
The Pause command may be needed if the phone is connected to certain
types of PABX or to any network where a pause is required.
Note : No more that 3 pauses should be inserted consecutively, otherwise
the telephone may not function properly.
- Lift handset
- Dial any digits required before the pause
- Press Pause button
- Dial remaining digits
8
5. PA X & System Usage
This telephone can be used behind a PABX or on a network that utilises
the recall function. There are many such systems and whilst it is likely
that no problems will be encountered, it cannot be guaranteed that the
telephone will operate correctly under all circumstances and any cases of
difficulty should be referred to your supplier.
Recall
Before you attempt to change the recall switch, labelled TBR R, see
( Figure 4&5 ), you should disconnect the phone from the network.
You will need a screwdriver, or similar tool to remove the cover plate over
the switch. Simply slide the Switch marked TBR R to the appropriate
setting ( the factory default is TBR ). If you are unsure which setting is
applicable, please consult your PABX manager or supplier. Do not adjust
the switch marked N, S1, S2.
Replace the cover, plug the phone back into the socket and it is ready for
use.
PABX access
Where a PABX access digit is required to obtain a direct outside line, it
may be necessary to insert a pause after dialling the access digit ( see
pause / redial section of this manual ).
Figure 5 Recall Switch
9
Voice messaging
When used behind a PABX, this telephone will respond to voice messaging
systems on many PABX types, giving a visual signal of a message waiting.
Your telephone manager will be aware of which system is relevant to your
organisation and will adjust or advise you on the adjustment of your
telephone accordingly.
This adjustment is carried out by means of a switch, labelled N/S1/S2 ,
located next to the recall switch, mentioned above.
As supplied, the telephone is set to the N (normal) position. Under no
circumstances should this white switch be set to the S1 or S2 without the
approval of your telecoms manager. In either of the S positions, the
telephone must NOT be connected directly to a public network line.
(Technical note : S1 and S2 are for reverse polarity messaging systems.
With such a system in use, if the telephone does not respond in the S1
position, switch it to the S2 position and it should then respond.
Some P BX's require a certain level of software and/or hardware within
the switch. If your telephone appears not to work, make sure that you
have the correct software/hardware installed).
6. Maintenance and Problem Solving
Your telephone is a precision electronic instrument. Avoid rough handling
and extreme temperatures.
Use a mild detergent and a damp cloth when cleaning. Never use a
stronger cleaner.
If your telephone does not appear to be working correctly, please check
the following :
No Dialling tone - Is phone cord properly connected to the wall
socket?
Altri manuali per Enterprise 98390
3
Indice
Altri manuali Interquartz Telefono
Interquartz
Interquartz Hotline 9826N Manuale utente
Interquartz
Interquartz Gemini 9335 Manuale utente
Interquartz
Interquartz VOYAGER IQ280 Manuale utente
Interquartz
Interquartz Memory Phone 9825 Manuale utente
Interquartz
Interquartz IQ360 Manuale utente
Interquartz
Interquartz 98583 Manuale utente
Interquartz
Interquartz Voyager 9283 Manuale utente
Interquartz
Interquartz 98583 Manuale utente
Interquartz
Interquartz Gemini IQ333 Manuale utente
Interquartz
Interquartz 98380 Manuale utente
Interquartz
Interquartz Gemini 9333 Manuale utente
Interquartz
Interquartz IQ750EHS Guida
Interquartz
Interquartz IQ50N Manuale utente
Interquartz
Interquartz Gemini IQ333 Manuale utente
Interquartz
Interquartz Gemini IQ330 Manuale utente
Interquartz
Interquartz Hotline 9826N Manuale utente
Interquartz
Interquartz Hotline 9826N Manuale utente
Interquartz
Interquartz Gemini Basic Manuale utente
Interquartz
Interquartz Enterprise 98393 HS Manuale utente
Interquartz
Interquartz Gemini 9330 Manuale utente
