Interroll RollerDrive EC310 Manuale utente
INSPIRED BY EFFICIENCY
Operating manual
Interroll RollerDrive EC310
Interroll RollerDrive EC310 DF
Interroll RollerDrive EC310 IP66
Manufacturer details
Interroll Engineering GmbH
Höferhof 16
42929 Wermelskirchen, Germany
Tel.: +49 (0) 2193 23 0
Fax: +49 (0) 2193 2022
www.interroll.com
Content
We have carefully compiled the content of this document and made every eort to ensure that the information
is correct, complete and up to date. However, we cannot assume any kind of guarantee for this information. We
expressly exclude any liability for any damage or consequential damage connected with the use of this document. We
reserve the right to modify the documented products and product information at any time.
Copyright/industrial property rights
Text, images, graphics and similar elements as well as their arrangement are subject to copyright protection and other
protective laws. The reproduction, alteration, transfer or publication of this document in full or in part is prohibited
in every form. This document is solely for informational purposes and the intended use and does not entitle to the
reproduction of the products in question. All the marks contained in this document (protected trademarks, such as
logos and commercial designations) are the property of Interroll Engineering GmbH or third parties and may not be
used, copied or distributed without prior written consent.
Version 3.1 (02/2019)
Translation of the original operating manual
3 of 42
Contents
1 About this document 7
1.1 Information about this operating manual 7
1.2 Warning notices in this document 8
1.3 Symbols 9
2 Safety-related information 10
2.1 State of the art 10
2.2 Proper use 10
2.3 Improper use 11
2.5 Dangers 12
Injury to persons 12
Electricity 12
Rotating parts 12
Heat 12
Work environment 12
Faults in operation 12
Maintenance 13
Unintentional start-up 13
2.6 Interface to other devices 13
2.7 Operating modes/operating phases 13
Standard operation 13
Special operation 13
3 Product information 14
3.1 Components 14
3.2 Product description 15
Overload protection 15
3.3 Rating plate 16
3.6 RollerDrive performance data 19
3.7 Controls for the RollerDrive EC310 19
3.8 RollerDrive connector 20
3.9 Dimensions of the motor shaft 21
4 of 42
Version 3.1 (02/2019)
Translation of the original operating manual
Contents
3.10 Dimensions of the bearing housings on the non-cable side 21
EC310 and EC310 DF 21
EC310 IP66 23
4 Transport and storage 24
4.1 Transport 24
4.2 Storage 24
5 Assembly and installation 25
5.1 Warning notices for installation 25
5.2 Installing the RollerDrive 26
Installing the attachment shaft 26
Attaching the non-cable side 27
The Interroll Interlock (optional) 29
5.3 Installation tool (accessory) 30
5.4 Warning notices for electrical installation 31
5.5 Electrical installation 32
6 Start-up and operation 33
6.1 Warning notices for start-up and operation 33
6.2 Start-up 33
Check before the initial start-up 33
6.3 Operation 34
Check before every start-up 34
6.4 Procedure in the event of accidents or faults 34
7 Maintenance and cleaning 35
7.1 Maintenance 35
Checking the RollerDrive 35
Replacing the RollerDrive 35
7.2 Cleaning 36
8 Assistance in the event of faults 37
8.1 Troubleshooting 37
Version 3.1 (02/2019)
Translation of the original operating manual
5 of 42
Contents
9 Decommissioning and disposal 38
9.1 Decommissioning 38
9.2 Disposal 38
10 Appendix 39
10.1 Accessories 39
Interroll controls 39
Interroll power supply unit 39
RollerDrive extension cable 39
PolyVee belt 40
PolyVee clamping aid 40
Tool 40
10.2 Translation of the original Declaration of Conformity 41
Version 3.1 (02/2019)
Translation of the original operating manual
7 of 42
About this document
1 About this document
1.1 Information about this operating manual
This operating manual covers the following Interroll motor rollers:
• RollerDrive EC310
• RollerDrive EC310 DF (DF = Deep Freeze, for refrigeration applications)
• RollerDrive EC310 IP66 (with higher protection rate)
In the course of this manual, the term "RollerDrive" will sometimes be used without specifying the type designation
"EC310".
The operating manual is a component of the product and contains important advice and information regarding the
The currently applicable version of this operating manual can be found online at: www.interroll.com/support/
All the information and advice in this operating manual has been compiled with respect to applicable standards and
regulations as well as the current state of the art.
For special versions, in addition to this operating manual, particular contractual arrangements and technical
documents apply.
¾
¾Keep this operating manual within close reach of the RollerDrive.
¾Pass this operating manual onto every subsequent owner or user.
The manufacturer assumes no liability for damage and malfunctions that occur as a result of non-
compliance with this operating manual.
Should you still have any unanswered questions after reading this operating manual, please contact Interroll
customer service. Contact details for your region can be found online at www.interroll.com/contact/
8 of 42
Version 3.1 (02/2019)
Translation of the original operating manual
About this document
1.2 Warning notices in this document
Warning notices are provided in the context in which danger can occur and describe the nature of the danger in
question. They are structured according to the following examples:
SIGNAL WORD
Type and source of hazard
Consequence(s) in the event of non-compliance
¾Measure(s) for avoiding hazard
Signal words indicate the type and severity of the consequences if measures to avoid the hazard are not observed.
DANGER
Denotes an imminent hazard.
If measures to avoid the hazard are not observed, death or severe injury will occur.
¾Preventive measures
WARNING
Denotes a potentially hazardous situation.
If measures to avoid the hazard are not observed, death or severe injury may occur.
¾Preventive measures
CAUTION
Denotes the possibility of a hazardous situation.
If measures to avoid the hazard are not observed, minor or moderate injury may occur.
¾Preventive measures
Version 3.1 (02/2019)
Translation of the original operating manual
9 of 42
About this document
NOTE
Denotes a situation that can lead to material damage.
¾Preventive measures
1.3 Symbols
This symbol indicates useful and important information.
ü
This symbol indicates general information relating to safety.
¾This symbol indicates an action that needs to be performed.
•This symbol indicates a listed item.
10 of 42
Version 3.1 (02/2019)
Translation of the original operating manual
Safety-related information
2 Safety-related information
2.1 State of the art
The RollerDrive EC310 has been constructed with respect to applicable standards and the current state of the art and
has been delivered in a condition that is safe to operate. Nevertheless, hazards can occur as a result of use.
Non-compliance with the instructions in this operating manual can result in life-threatening injuries.
In addition, the applicable local accident prevention regulations for the area of application and general safety
regulations must be adhered to.
2.2 Proper use
The RollerDrive may only be used in an industrial environment for industrial purposes within the stipulated
It must be integrated into a conveyor unit or conveyor system before commissioning.
Application eld
Drive for unit load conveyor technology, such as for the transportation of cardboard boxes, containers, barrels,
workpiece carriers or tyres.
The RollerDrive is suitable for:
• Zero-pressure roller conveyors
• Entry conveyors
• Roller conveyor curves
• Small belt conveyors
Depending on the area of application of the RollerDrive, PolyVee, round or toothed belts can be used for the power
transmission.
Altri manuali per RollerDrive EC310
2
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Interroll Azionamento CC
Manuali Azionamento CC popolari di altre marche
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Manuale utente
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Manuale elenco delle parti
Chamberlain Garog
Chamberlain Garog D Series Manuale utente
Parker
Parker PDS Series Manuale utente
Festo
Festo DGC G Series Guida all'installazione
Binks
Binks QS-5012-1-CE Manuale utente
