Interspace Industries MicroCue2 Manuale utente

Cueing and Presentation Control Specialists

MicroCue2

User Manual

With New Laser Pointer Handset

Do not stare into beam

Contents:

Introduction 3

Safety Instructions 4

Diagrams 5

Laser Handset and safe use 6

Classic Handset 7

Regulations Compliance 8

Environmental 13

Operating Instructions 13

Programming Special Cues 16

Loss of Signal 17

Trouble Shooting 18

Radio Frequency System 23

Equipment Supplied and Accessory Options 23

Technical Support Contact 23

Introduction

MicroCue2is the mobile professional’s 1st choice presentation cueing

system. Featuring USB interfacing, MicroCue2 can connect to computers

and directly control up to 2 PowerPoint presentations as in main and back-

up or a separate presentation for notes etc., as well as providing visual

and audible cues. The system design provides for a highly portable and a

quick, easy-to-set-up presentation control system.

MicroCue2 is based on the Interspace Industries MasterCue series

platform, retaining proven features such as the robust case design and the

AV industrial grade wireless RF system.

With 3 buttons the presenter can request to go backwards as well as

forwards if required, or to communicate an alternative presentation

function (e.g. go to black or restart). The visual and audible cues are easy

to understand and designed to clearly indicate which button has been

pushed and what cue action is required.

MicroCue2

- For Professional Presentations on the Move!

We hope MicroCue2 exceeds your expectations and welcome any

feedback that you have about this or any of our products.

Thank you.

The Interspace Industries Team

www.interspaceind.com

Safety Instructions

All safety and operating instructions should be read before this product is operated and

should be retained for further reference. Please adhere to all the warnings on this product

and in these operating instructions. Please follow these instructions carefully.

Power. Only use the power source indicated on the device. Devices equipped with a

grounded plug should only be used with a grounded type outlet. In no way should this

grounding be disconnected, modified or suppressed.

Power Supply Lead. To unplug the device always pull by the plug itself, not the power

supply lead. The power source outlet should always be near the MicroCue main unit and

easily accessible. Ensure the power supply lead cannot be walked on or damaged by items

placed on or against it. Do not use if the power supply lead is damaged. Using the device

with a damaged power supply lead may expose you to electric shock or other hazards.

Check the condition of the power supply lead regularly. Contact your dealer or service centre

immediately for a replacement if damaged.

Keep Away From Harmful Substances

To prevent the risk of electric shock and fire, do not expose this device to rain, humidity or

intense heat sources (such as radiators or direct sunlight). Avoid using this equipment in

environments where there is excessive heat, dust, moisture, chemicals, vibration or

mechanical shocks.

Slots and Openings. These are designed into the device for ventilation and to avoid

overheating. Always ensure these openings remain clear. Do not attempt to insert

anything into these openings under any circumstances. If liquids have been spilled on,

or objects have fallen into the product it must be checked by a qualified technician before re-

using.

Connections. All inputs and outputs (except for power input) are TBTS defined under

EN60950.

 DO NOT OPEN SYSTEM DUE TO HIGH VOLTAGE.

 DO NOT IMMERSE IN WATER.

Servicing. Do not attempt to service this product yourself. Should an unauthorised person

attempt to either open the covers or service our products, it may invalidate your Limited

Factory Warranty. In addition, opening or removing covers and screws may expose you to

electric shocks or other hazards. Refer all servicing to qualified service personnel.

Figure 1 MicroCue Connections Diagram

Figure 2 MicroCue Rear Panel

12VDC Power Input

Mini Jack Headphone

Cue Tone Output

RF Level Indicator

BNC Aerial Connector

USB Connections

Keyboard Program

Input (PS2 Socket)

Handsets

Two types of handsets with different button configurations can be supplied with the

MicroCue2 system. The original classic handset and one with a laser

incorporated into the design.

Laser Handset

A slimmer, slightly longer handset that sits comfortably in your hand.

A finger notch on the rear of the handset anchors it to your hand.

Extensive redesign of the internal antenna means we have squeezed

a little bit more distance out of this handset. Over 100m open field.

We use 2 batteries:- one for the transmitter, (AA

or MN1500 size, 1.5V) and a separate battery just

for the Laser (CR2, 3V). This is a high power/high

capacity battery that is common in photographic

systems and readily available.

Safe Laser Use

The Laser is Class 2, less than 1mW green 532nm laser. It is 10x

brighter than an equivalent red laser.

It is important to use the laser in a safe manner by highlighting your

images on screens. It is not advisable to use a laser on a monitor that has a glass

front, or something similar, as the reflection of the beam could reflect into

someone's eyes and may cause discomfort or worse. Use the beam in either a

circular or backwards and forwards motion to circle an outline, highlight an item

being discussed or, underline something.

CAUTION – Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous radiation

exposure

DO NOT SHINE INTO THE SKY AT AIRCRAFT —

You will be arrested, fined and imprisoned in many countries!

LASER RADIATION

DO NOT STARE INTO BEAM

532nm ,1mW

IEC/EN 60825-1:2007

Complies with 21 CFR 1040.10 & 1040.11 except for

deviation Pursuant to Laser No. 50, dated June 24, 2007

FCC ID T3QI2TXL

Handsets (Cont’d)

Power Consumption & LED Status

We have made the handset intelligent in respect of its battery condition. The state

of the battery can be monitored on the handset. The dual LED indicators above

the push buttons will light-up in the following formats:-

 Flash green when the ‘Next’ button is pressed

 Flash Red when the ‘Back’ button is pressed

 Flash Amber when the ‘Black’ button is pressed

 Flash Amber twice when both the ’Back’ and ’Next’ buttons are pressed at

the same time indicating ‘low’ battery condition.

NOTE - Should the battery be unable to drive the RF circuitry accurately, the dual

LEDs will flash Red quickly without transmitting. If this happens, you will need to

replace the battery to obtain the correct operation.

Classic Handset

The original Classic handset has proved to be a very popular and trusted handset

with a great open field distance of over 75m.

Power Consumption & LED Status

If no cue signals are received from the handset and the cue LED on the handset

does not illuminate when any cue button is pressed, the battery will need to be

replaced. An MN1604 or PP3, 9V is used.

Handset Configuration

Both the Laser and original Classic handsets are

available in different button configurations:-

3-button which includes ‘Next’, ‘Back’ and ‘Black’

as shown above and opposite. (3 button excluding

the Laser button on the Laser handset);

2-button which excludes the ‘Black’ button and

1-button (Classic handset model) for ‘Next’ only.

This single button has been useful for nervous or

presenters unfamiliar with the technology.

Both handsets are designed to be comfortable in

the hand whilst being functional and they require

no training.

CAUTION !

Risk of explosion if batteries are replaced by an incorrect type.

Dispose of batteries according to manufacturers’ instructions

FCC STATEMENTS

Interspace Industries

MicroCue2

Made In UK

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired opera-

tion.

Interspace Industries

4650 South Butterfield Drive

Tucson

AZ85714

United States of America

Tel Office: 520 689 4237

Warning ! Any modification or changes made to this device, unless explicitly approved by

Interspace Industries, will invalidate the authorisation of this device. Operation of an unau-

thorised device is prohibited under Section 302 of the Communications Act of 1934, as

amended, and Subpart I of Part 2 of Chapter 47 of the Code of Federal Regulations.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC COMPLIANCE INFORMATION STATEMENT

DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

We, Interspace Industries, have determined that the above named equipment has been

shown to comply with the applicable technical standards. Furthermore, we warrant that each

unit of equipment marketed is identical to the unit tested and found acceptable with the

standards. The records maintained continue to reflect the equipment being produced within

the variation that can be expected due to quantity production and testing on a statistical

basis.

David J Humphrys, Managing Director

Interspace Industries

Unit 1a

126 Great North Road

Hatfield, Herts

AL9 5JN

November 2011

Manufacturer: Interspace Industries

Responsible Party in the

USA:

Interspace Industries

4650 South Butterfield Drive

Tucson, AZ85714, USA

Tel Office: 520 689 4237

Product: MicroCue2

Authorisation Proce-

dure:

Declaration of Conformity

EC DECLARATION OF CONFORMITY TO R&TTE

DIRECTIVE 1995/5/EC

Reference standards used for presumption of conformity:

Article 3.1a EN 60950 2006/A1: 2010

Article 3.1b EN 301 489-3 v1.4.1. : EN301 489-1 v1.8.1

Article 3.2 EN 300 220-2 V2 3.1

EN 55103-1:2009 (Emissions) / EN 55103-2:2009 (Immunity)

Declaration

We, Interspace Industries, declare under our sole responsibility that the essential radio test

suites have been carried out and that the above product to which this declaration relates is in

conformity with all the applicable essential requirements of EU Directive 1995/5/EC

David J Humphrys, Managing Director Date: November 2011

Interspace Industries

Unit 1a, 126 Great North Road

Hatfield, Hertfordshire, AL9 5JN

United Kingdom

EC DECLARATION OF CONFORMITY TO R&TTE

DIRECTIVE 1995/5/EC

Manufacturer: Hive Industries Ltd - Interspace Industries

Product: MicroCue2 & I2TX-1 or –2 or –3 & i2TX-2L or –3L

Conformity Assess-

ment:

Annex III; Internal production control plus specific apparatus

tests

English Hereby, Interspace Industries, declares that this “MicroCue2” is in compliance

with the essential requirements and other relevant provisions of Directive

1999/5/EC.

Finnish Interspace Industries vakuuttaa täten että “MicroCue2” tyyppinen laite on direk-

tiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden

ehtojen mukainen.

Swedish Härmed intygar Interspace Industries att denna “MicroCue2” står I överensstäm-

melse med de väsentliga egenskapskrav och övriga relevanta bestämmelser

som framgår av direktiv 1999/5/EG.

Indice

Altri manuali Interspace Industries Presentatore digitale

Interspace Industries

Interspace Industries MasterCue V7 Manuale utente

Manuali Presentatore digitale popolari di altre marche

Edirol

Edirol RG-100 Manuale utente

Hama

Hama Como Manuale utente

Dukane

Dukane AV-P1000 Manuale utente

Canon

Canon PR3 Manuale utente

VSON

VSON N81 Manuale utente

Samsung

Samsung UF-130DX Manuale utente

Targus

Targus Multimedia Manuale utente

Edirol

Edirol PR-50 Manuale del proprietario

x-pointer

x-pointer IMAGE POINTER XPM170Y Manuale utente

Acrobak

Acrobak BLP-305 Manuale utente

Targus

Targus Mac AMP11 Manuale utente

Edirol

Edirol PR-50 Manuale utente

Samsung

Samsung SDP-850 Manuale utente

Dukane

Dukane DV-P303A Manuale utente

RemotePoint

RemotePoint Presenter Global Manuale utente

Kensington

Kensington Wireless Presenter with Laser Pointer Istruzioni operative

NEC

NEC DS1-MP10RX2 Manuale operativo

Logitech

Logitech R800 - Professional Presenter Presentation Remote... Manuale utente