INVENTOR EPC-09 Manuale utente
1
MODELS:
REMOTE CONTROLLER
REMOTE CONTROLLER
EPC-09
EPC-09BS
• USER’S MANUAL
• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ
• MANUAL UTILIZATORULUI
• BEDIENUNGSANLEITUNG
• MODE D'EMPLOI
• MANUALE DELL’ UTENTE
• MANUAL DEL PROPIETARIO
ENGLISH | ΕΛΛΗΝΙΚΑ | ROMANA | DEUTSCH |
FRANҪAIS | ITALIANO | ESPAÑOL
2
CONTENTS
Remote control specications ................................................................... 2
Function buttons ......................................................................................... 3
Using the remote control............................................................................ 4
Remote LED screen indicators .................................................................. 5
How to use the basic functions.................................................................. 6
How to use the advanced functions .........................................................13
3
RG57H(B)/BG(C)E
RG57H(B)/BG(C)EU1
RG57H(B)/BG(C)EU1-M
RG57H(B)/BG(C)E-M
Remote Control Specications
Model RG57H(B)/BG(C)E;RG57H1(B)/BG(C)
E;RG57H2(B)/BG(C)EF;RG57H3(B)/
BG(C)EFU1; RG57H3(B)/BG(C)EF;
RG57H1 (B)/BG(C)E-M; RG57H(B)/
BG(C)EU1; RG57H4(B)/BG(C)EFU 1;
RG57H (B)/BGC E-M; RG57H (B)/BGC
EU1 -M
Rated Voltage 3.0V(Dry batteries R03/LR03X2)
Signal Receiving Range 8m
Environment -5°C~60°C(23°F~140°F)
ON/OFF
TEMP
SHOR T
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
SLEEP SWINGLED
ON/OFF
TEMP
SHOR T
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
LED
ON/OFF
TEMP
SHOR T
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
SLEEP
FOLLOW
ON/OFF
TEMP
SHOR T
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
LED
SLEEPSWING
ION
LED
ME
SLEEP
FOLLOW
ME
ON/OFF
TEMP
SHOR T
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
SLEEP
FOLLOW
SWINGLED
ME
RG57H4(B)/BG(C)EFU1RG57H3(B)/BG(C)EF
RG57H3(B)/BG(C)EFU1
RG57H2(B)/BG(C)EFRG57H1 (B)/BG{C)E;
RG57H1 (B)/BG(C)E-M
4
TIMER ON
Sets timer to turn unit on (see
How to Use Basic Functions
for Instructions)
TIMER OFF
Sets timer to turn unit off (see
How to Use Basic Functions
for Instructions)
LED
Turns indoor unit’s LED dis-
play on and off.
If you are sensitive to light
when you go to sleep, you
can press the LED button to
turn off the LED display on
the unit. Press the button
again to turn it back on.
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control.
The following is a brief introduction to the remote control itself. For instructions on how to operate your air
conditioner, refer to the How to Use Basic Functions section of this manual.
ON/OFF
Turns the unit on or off.
MODE
Scrolls through operation
modes as follows:
AUTO COOL DRY HEAT FAN
NOTE: Please do not select
HEAT mode if the unit you
purchased is cooling only. The
cooling only appliance does not
support heat mode.
FAN SPEED
Selects fan speeds in the follow-
ing order: AUTO LOW MED HIGH
NOTE: MED is optional.
ION
Press this button, the Ionizer
is energized and will help to
remove pollen and impurities
from the air.
SLEEP
Saves energy during sleeping
hours.
SWING
Starts and stops louver
movement.
FOLLOW ME
Temperature sensing
and room temperature
display button.
SHORT CUT
Sets and activates your
favorite pre-settings.
TEMP
Increases temperate in
increments of 1°C (1°F).
Max. temperature is 30°C
(86°F).
TEMP
Decreases temperate in
increments of 1°C (1°F).
Min. temperature is 17°C (62°F).
NOTE: Press and hold and
buttons together for 3 seconds
will alternate the temperature
display between the °C & °F
scale.
NOTE:
Swing, Ion and Follow me features are optional. RG57H1 (B)/BG(C) E-M comes without med fan speed.
ON /OF F
TE MP
SHORT
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
LED
IO N
SLEEP
FOLLOW
SWING
ME
5
Using The Remote Control
NOT SURE WHAT A FUNCTION DOES?
Refer to the How to Use Basic Functions and
How to Use Advanced Functions sections of
this manual for a detailed description of how
to use your air conditioner.
SPECIAL NOTE
•Button designs on your unit may differ slightly
from the example shown.
•If the unit does not have a particular function,
pressing that function’s button on the remote
control will have no effect.
•If there are a major differences between the
“USER’S MANUAL” and the “Remote control
Illustration” on function description, please use
the description in the “USER’S MANUAL”.
Inserting and Replacing Batteries
Your air conditioning unit comes with two AAA
batteries. Put the batteries in the remote control
before use.
1. Slide the back cover from the remote Control
downward, exposing the battery compartment.
2. Insert the batteries, paying attention to match the
(+) and (-) ends of the batteries with the symbols
inside the battery compartment.
3. Slide the battery cover back into place.
BATTERY NOTES
For optimum product performance:
•Do not mix old and new batteries, or batter-
ies of different types.
•Do not leave batteries in the remote control
if you don’t plan on using the device for
more than 2 months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted mu-
nicipal waste. Refer to local laws for proper
disposal of batteries.
TIPS FOR USING REMOTE CONTROL
•The remote control must be used within 8
meters of the unit.
•The unit will beep when the remote signal is
received.
•Curtains, other materials and direct sunlight
can interfere with the infrared signal receiver.
•Remove batteries if the remote will not be
used more than 2 months.
6
Temperature/Timer display
Displays the set temperature by default, or timer setting
when using TIMER ON/OFF functions
•Temperature range: 17-30oC(62°F-86°F)
•Timer setting range: 0-24 hours
This display is blank when operating in FAN mode.
Remote LED Screen Indicators
Transmission Indicator
Lights up when remote sends a
signal to the unit
MODE display
Displays the current
mode, including:
•AUTO
•COO
•DRY
•heat
•FAN
ON/OFF display
Appears when the unit is turned
on, and disappears when it is
turned off
TIMER ON display
Displays when TIMER
ON is set
TIMER OFF display
Displays when TIMER
OFF is set
ECO display
Not available for
this unit
Battery display
Low battery
detection
SLEEP display
Displays when
SLEEP function is
activated
FOLLOW ME
display
Indicates that the
FOLLOW ME
function is on
FAN SPEED display
Displays selected FAN SPEED:
»»»»»»» HIGH,»»»»»»» MED,
or »»» LOW
This display is blank when set
to AUTO speed.
NOTE: MED is optional.
SILENT display
Not available for this unit
Not available for
this unit
7
COOL operation
1. Press the MODE button to select COOL mode.
2. Setyour desired temperature using theTemp^
orTemp’v button.
3. Press the FAN button to select the fan speed:
AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the unit.
How To Use The Basic Functions
SETTING TEMPERATURE
The operating temperature range for units is
17-30°C (62oF-86°F). You can increase or
decrease the set temperature in 1°C (1°F)
increments.
AUTO operation
In AUTO mode, the unit will automatically select
the COOL, FAN, HEAT or DRY mode Dased on the
settemperature.
1. Press the MODE button to select Auto mode,
2. Setyour desired temperature using the Temp ▲ or
Temp▼ button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can t be set in Auto mode.
1
3
2
ON/O FF
TEMP
SHORT
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
SLEEPLE D
FOLLOW
ION
SWINGME
1
3
2
4
ON/O FF
TEMP
SHORT
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
SLEEPLE D
FOLLOW
ION
SWING
ME
8
How To Use The Basic Functions
DRY operation (dehumidifying)
1. Press the MODE button to select DRY mode.
2. Setyour desired temperature using the Temp▲
orTemp ▼ button.
3. Press the ON/OFF button to start the unit.
1
3
2
ON/O FF
TEMP
SHORT
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
LED
ION
SLEEP
FOLLOW
SWINGME
1
2
3
ON/O FF
TEMP
SHORT
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
SLEEP LE D
ION
FOLLOW
SWING
ME
FAN operation
1. Press the MODE button to select FAN mode.
2. Press FAN button to select the fan speed: AUTO,
LOW, MEDor HIGH.
3. Press the ON/OFF button to start the unit.
NOTE: You can’t settemperature in FAN
mode. As a result, your remote control’s
LCD screen will notdisplay temperature.
NOTE: FAN SPEED can t be changed in
DRY mode.
9
How To Use The Basic Functions
HEAT operation
1. Press the MODE button to select HEAT mode.
2. Setyour desired temperature using the Temp ▲ or
Temp ▼ button.
3. Press the FAN button to select the fan speed:
AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the unit.
NOTE: As outdoor temperature drops, the
performance ofyour unit’s HEAT function may
be affected. In such instances, we recommend
using this air conditioner in conjunction with
other heating appliances.
1
3
2
4
ON/O FF
TEMP
SHORT
CUT
TIME R
ON
TIME R
OFF
MODE
FAN
SLEEPLE D
FOLLOW
ION
SWINGME
10
Your air conditioning unit has two timer-related
functions:
TIMER ON- sets the amount of time when
the unit will automatically turn on.
TIMER OFF- sets the amount of time when
the unit will automatically turn off.
TIMER ON function
The TIMER ON function allows you to set a time
when the unit will automatically turn on, such as
when you come home from work.
1. Press the TIMER ON button. By default, the last time
period thatyou set and an “h” (indicating hours) will
appear on the display.
Note: This number indicates the amount oftime after
the current time that you want the unit to turn on.
For example, if you set TIMER ON for 2 hours, “ 2.Oh”
will appearon the screen, and the unit will turn on after
2 hours.
2. Press theTIMER ON button repeatedly to set the time
when you want the unit to turn on.
3. Wait 2 seconds, and then the TIMER ON function will
be activated. The digital display on your remote con-
trol will then return to the temperature display.
Setting the TIMER function
Example: Setting unit to turn on after 2.5 hours.
2sec
ON/OF F
MODE
FAN
SHOR T
CUT
TIMER ON
TIMER OF
F
TEMP
SLEEP
1s ec
x5
1
3
2
4
TIMER ON TIMER ON
Altri manuali per EPC-09
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali INVENTOR Telecomando
INVENTOR
INVENTOR V4MFO-66B Manuale utente
INVENTOR
INVENTOR RG35A/BGE Manuale utente
INVENTOR
INVENTOR Neo N2UVI-09WFI Manuale utente
INVENTOR
INVENTOR RG10B1/BGEF Manuale utente
INVENTOR
INVENTOR MGHP-12 Manuale utente
INVENTOR
INVENTOR V4MFI-24 Manuale utente
INVENTOR
INVENTOR V6MCRI32-18WiFiR/U6MRS32-18 Manuale utente
INVENTOR
INVENTOR PFI2VI-09WFI/PFI2VO-09 Manuale utente
INVENTOR
INVENTOR A2MVI-09/A2MVO-09 Manuale utente
INVENTOR
INVENTOR YB1FA Manuale utente
INVENTOR
INVENTOR P7MVO-09 Manuale utente
INVENTOR
INVENTOR RG66B4(2H)/BGEF Manuale utente
INVENTOR
INVENTOR V5MFO-66 Manuale utente
INVENTOR
INVENTOR AR1MVI-09WFR Manuale utente
INVENTOR
INVENTOR LV5MLI32-12 Manuale utente
INVENTOR
INVENTOR V5MFI32-60 Manuale utente
INVENTOR
INVENTOR PFI2VI-12WFIB Manuale utente
INVENTOR
INVENTOR RG10N2(D2S) Manuale utente
INVENTOR
INVENTOR V2MCI-24 Manuale utente
INVENTOR
INVENTOR RG57A2/BGEF Manuale utente
