IOGear GUW101A Manuale utente
1
GUW101A
Installation
Installation Guide
Wireless Audio Receiver
2
3
2
3
Table of Contents
System Requirements 4
Package Contents 5
Device Overview - Wireless Audio Receiver 6
Software Installation - Preparing for Setup 7
Software Installation – For XP users 8
Update/Install Wireless USB Manager 8
Update USB Transmitter 11
Update Wireless VGA Receiver 15
Software Installation – For Vista users 20
Update/Install Wireless USB Manager 20
Update USB Transmitter 23
Update Wireless Video Receiver 28
Hardware Installation 34
Connecting the Audio Receiver to Speakers 38
Advanced Settings – Wireless USB Manager 42
Advanced Settings – Wireless USB
Transmitter Setting
44
Trouble Shooting Guide 46
Technical Specication 60
Appendix 62
Limited Warranty 66
Federal Communications Commission
(FCC) Statement
67
Contact 68
4
5
System Requirements
1 x Wireless USB Transmitter (GUWA200)•
Available 3.5mm or RCA audio input socket on your TV/display or stereo system•
Important Note: Your computer must be Wireless USB ready or has already installed Wireless USB on the
computer before you can use the Wireless Audio Receiver.
4
5
1 x Power adapter•
1 x Quick Start Guide /•
User manual
1 x Installation CD•
1 x Warranty /•
Registration Card
Package Contents
1 x Wireless USB to•
Audio receiver (for stereo)
1 x USB 2.0 A to mini-B cable (3 ft.)•
1 x 3.5mm to 3.5mm cable•
1 x 3.5mm to RCA cable•
6
7
Device Overview - Wireless Audio Receiver
Power/Activity LED1.
- LED is solid when connection is established
- LED is blinking when power is on and con
nection is not established
3.5mm Audio Socket2.
- Connects to the 3.5mm audio connector of
the included 3.5mm or RCA audio cable, and
the other end to the available 3.5mm audio
socket or RCA audio socket on your display
or stereo system
Mini-B USB Port3.
- Connects to the mini-B end of the included
USB cable, and the Type-A end to an avail
able USB port on your computer to create
association between your computer and the
audio receiver
Power plug4.
- Power adapter socket
1
2
3
4
6
7
Software Installation - Preparing for Setup
This section is only for customers who previously purchased GUW2015VKIT, GUW2015VKITW6 or
GUW2015V. In order to ensure the quality of the performance, this section will guide you through
a series of steps for upgrading the Wireless USB Manager software and the rmware of the USB
Transmitter and the Wireless Video Receiver. Please follow the exact procedures, DO NOT skip or
re-arrange the procedures.
If this is your rst purchase of Wireless USB products and you do not have any GUW2015VKIT,
GUW2015VKITW6 or GUW2015V, then please follow below instructions to complete only the
Update/Install Wireless USB Manager section. Then proceed to page 34 for Hardware Instal-
lation.
8
9
Update/Install Wireless USB Manager
Insert the CD into the CD-ROM of your1.
computer, and the auto run program will load
the GUW101A Software Installation window.
Click on2. Install Wireless USB Manager to
continue
Click on3. Yes to continue.
Software Installation – For XP users
8
9
Click on4. Next to continue.
10
11
Select5. Yes, I want to restart my computer
now., then click on Finish to restart your
computer.
Indice
Altri manuali IOGear Ricevitore
IOGear
IOGear GWSSKIT Istruzioni operative e di manutenzione
IOGear
IOGear GWHDRX01 Manuale utente
IOGear
IOGear GUWAVKIT3 Manuale utente
IOGear
IOGear Share Pro GWHD2DKIT Manuale utente
IOGear
IOGear GWHD11 Manuale utente
IOGear
IOGear Share Pro USB-C GWHDKIT11C Manuale utente
IOGear
IOGear GWAVRC Manuale utente
IOGear
IOGear GWHD11 Manuale utente
IOGear
IOGear GUWAVKIT Manuale utente
IOGear
IOGear Bluetooth Audio Transport GBMH221W6 Manuale utente
