❷Configure the IP address of your computer (Example: Win7)
Right-click the network icon on the lower-right corner of your computer. Click Open Network and Sharing Center, Local
Area Connection, and then Properties. Double-click Internet Protocol Version 4 (TCP/IPv4), select Use the following IP
address, set IP address to 192.168.0.x(x: 2 to 253. The IP address in this example is 192.168.0.10) and Subnet mask to
255.255.255.0, and click OK.
❸Log in to the web UI of the AP
Start a web browser on your computer, and enter the AP’s management IP address (192.168.0.254) in the address bar,
and press Enter. Then enter the user name and password (default: admin/admin) of the AP, and click Login.
Tip: If you cannot log in to the web UI of the AP, refer to Q1 in FAQ.
❹Set WiFi name and WiFi password for the AP
Click Quick Setup, then configure SSID (WiFi name), Security Mode (WPA2-PSK is recommended), Key, and click
Save.
