IRIS 095 Manuale utente
IRIS095
USER
GUIDE
IRIS095 SERIES COLOUR CAMERA
Water Resistant Day / Night Infra Red Colour Camera
Dimensions
207mm x 96mm
Weight
900g
Material
Aluminium ard Anodysed / White Powder Coat Finish
Imaging
1/3” SONY Super AD II CCD
Horizontal Resoluiton
680 TVL Low Illumination
Pixels
PAL: 752( ) x 582(V) NTSC: 768( ) x 495(V)
TV System
PAL / NTSC
S anning
PAL:625 Lines, 50 Field/Sec; NTSC:525 Lines, 60 Field/Sec
White Balan e
Automatic
Syn hronization
Internal
Output Signal
Composite Video 1V P~P 75Ω
Usable Illumination
0 Lux / F1.2 (LED ON)
Shutter Speed
Auto:PAL 1/50~1/100,000 Sec ; NTSC 1/60 ~1/100,000 Sec
IR Spe trum
850nm
Conne tions
Video via BNC Female / Power via DC Jack 2.1mm
Lens
12mm Fixed as Standard
Illumination
2 Pieces / IR Distance = 100 meters
Power
DC12V 300mA
Operating Temperature
-10°C ~ +60° Relative umidity 95% Max
Environmental Rating
IP66
Signal / Noise
48db or more (AGC OFF)
Gamma
0.45
CAUTION
ELECTRIC SHOCK RISK. DO NOT OPEN
TO REDUCE T E RISK OF ELECTRIC S OCK DO NOT REMOVE COVER
OR DISMANTLE DEVICE. NO USER SERVICEABLE PARTS INSIDE. IN T E
EVENT OF MALFUNCTION OR PRODUCT FAILURE CONTACT YOUR
DEALER.
DO NOT ATTEMPT TO CONNECT TO ANY POWER SUPPLY OUTSIDE OF
T E RATING SPECIFIED IN T E SPECIFICATION TABLE OR GUIDELINES
DETAIL WIT IN T IS DOCUMENT.
WARNING: READ BEFORE USE
INTRODUCTION
Fixed Long Range Infra Red Night Vision Camera
CONNECTIONS
The Iris-095 is a high performance. long range Infra Red night vision camera which of-
fers up to 100 meters of visibility in total darkness.
The camera can be used in a wide spectrum of applications, from navigation at night
for pleasure craft through to search and rescue operations and law enforcement activi-
ties.
The camera incorporates a high resolution 680 TVL CCD imaging sensor and two pow-
erful iInfra Red illuminators that cast an invisible beam to enable the camera to function
in total darkness.
The housing and sunshield are manufactured from top grade materials and powder
coated in a unique modern marine colour finish.
The camera is supplied with a three year guarantee. Please contact your dealer for
more information on how to register your product.
The IRIS095 camera is fitted with a cable tail which has a 2.1mm DC Jack for the
power and a female BNC connector for the video signal. The polarity of the power con-
nection is center pin = +12V, connector body = Ground.
Use a suitable coaxial cable with an impedance of 75Ω for the video signal or a suit-
able Video Balum if using Cat 5 cable.
Ready made power, video and combination cables are available from Iris Innovations.
Video (1v P~P Composite 75Ω)
12VDC 300mA
Connect to boatʼs distri-
bution panel and ensure
suitable current over-
load isolation is in place.
Electrical and electronic equipment, batteries, battery
chargers and equipment housings, at the end of their life
should be disposed of separately from your household
waste. Please dispose of all components correctly at your
local waste collection / recycling centre.
De laration of Conformity
Model Number: IRIS-095
Trade Name: Iris Marine
Responsible party: Iris Innovations Limited
Address: Units 8&9 Swanwick Business Centre, Bridge
Road, Swanwick. ampshire SO31 7GB. United Kingdom
Telephone: +44(0)1489 570797
This device complies with Part 15 of the FCC Rules. Op-
eration is subject to the following rules:
(1) this device may cause harmful interference, and
(2) this device must accept any interference received, in-
cluding interference that may cause undesired operation.
Warning:
This product contains chemicals known to the state of California to cause cancer, birth defects or other re-
productive harm. Wash hands after handling.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions may cause harmful interference
to radio communications. If this equipment does cause interference to radio or television reception the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorientate or relocate the receiving antenna.
Increase the separation between the equipment and transmitting / receiving device.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult your dealer or a qualified CCTV engineer for help.
Iris Innovations Limited
Units 8&9 Swanwick Business Centre.
Bridge Raod, Swanwick. ampshire SO317GB
United Kingdom
Tel/Fax: +44(0)1489 570797
email: [email protected]
web: www.boat-cameras.com
Dimensions
Indice
Altri manuali IRIS Telecamera IP
