10
OPERATING INSTRUCTIONS
Working in Automatic mode (self-leveling):
In automatic mode the laser level will level itself in a ± 2.5° range
and will project 1 horizontal 360° or/and 2 vertical 360° green
beams.
1. Remove the laser level from the case and place it on a solid,
flat, vibration free surface or on a tripod.
2. Push the locking switch #1 to the ON position. The laser level
will project a 360° horizontal beam. The beam indicator (b) will
turn on.
3. Press the beam selector button (a) - it will turn on a 360°
vertical side beam instead of the horizontal beam.
4. An additional click on the beam selector button will turn on a
360° vertical front beam in addition to the side vertical beam.
5. One more click on the beam selector button (a) will switch on
the horizontal beam in addition to the vertical beams.
6. An additional click on the beam selector button (a) will switch off
the two vertical beams.
7. If the initial inclination of the laser level is beyond ± 2.5° and the
automatic mode is activated, the laser beams will flash. In this
case reposition the laser level on a more level surface.
8. Before moving the laser level turn the locking switch #1 to the
OFF position, this will lock the pendulum and protect your laser
level.
102494
