IRUS I102 Manuale utente
System
®
exhibition
Assembly instructions
for the exhibition stand I102
constisting of:
- 6x Aluminium proles à 1250 mm incl. 8 bores
- 6x Aluminium proles à 1250 mm incl. 8 bores and adjustable feet
- 2x Aluminium proles à 300 mm incl. 8 bores for fascia sign frame
- 10x Aluminium cross proles with pointed screws for the lower and upper mounting
- 5x Aluminium cross proles for the middle mounting
- 6x Aluminium cross proles with pointed screws for fascia sign frame
- 20x H-proles à 1200mm to stabilize the panels.
- 6x Extension bolt for aluminium prole
- 3x Longarm spothlights 450mm incl. bulb
6x 3x
5x
6x
6x 20x
2x
10x
6x
System
®
exhibition
Important
Pointed screws must be used for all proles with screw holes.
1. Mount the bottom cross proles
including the pointed screws to
form the corner.
2. Then mount the cross proles.
3. Mount the required lower cross
proles including pointed screws.
4. Then mount the cross proles
and insert the bolts in the prole.
System
®
exhibition
7. Then mount the fascia sign frame
5. Push the top proles onto the
bolts. Ensure that the holes face
upward.
6. Then mount the cross proles
including the pointed screws.
8. Fully assembled exhibition stand.
If necessary, use the adjustable feet
to compensate for unevenness in the oor.
Indice
Altri manuali IRUS Rack e supporto
IRUS
IRUS Flexo I Manuale utente
IRUS
IRUS Z100 Manuale utente
IRUS
IRUS Z106 Manuale utente
IRUS
IRUS I110 Manuale utente
IRUS
IRUS 40.128 Manuale utente
IRUS
IRUS I104 Manuale utente
IRUS
IRUS Advertising cube 40.121 Manuale utente
IRUS
IRUS Kabine Z110 Manuale utente
IRUS
IRUS 40.122 Manuale utente
IRUS
IRUS Attachment module 180 VIII Manuale utente
