IRUS I104 Manuale utente
System
®
exhibition
assembly instructions
for the exhibition stand I104
constisting of:
- 6x Aluminium prole à 1250 mm incl. bores
- 6x Aluminium prole à 1250 mm incl. adjustable foot and bores
- 10x Aluminium cross prole with pointed screws for the lower and upper mounting
- 20x H-Proles à 1217mm to stabilize the panels.
- 6x Extension bolt for aluminium prole
- 3x longarm lighting 450mm incl. replacement bulb
6x 6x 10x
6x 3x
20x
System
®
exhibition
1. Mounting the lower area of the
corner with the aluminium cross
prole incl. pointed screws. After
insert the extension bolts.
3. Now mount the upper aluminium
cross prole incl. pointed screws.
Important during assembly
Pointed screws must be used for all proles that have holes.
2. Slide the upper proles over the
extension bolts. Make sure that
the boreholes are upwards.
4. Further assembly of the lower
section with the aluminium cross
prole incl. pointed screws.
System
®
exhibition
5. Insert the remaining extension bolts and
slide the remaining upper proles over
the extension bolts. Make sure that the
boreholes are upwards.
6. Now mount the remaining upper
aluminium cross prole incl.
pointed screws.
7. Fully assembled exhibition stand.
If necessary, compensate for
uneven oors with the leveling feet.
Altri manuali IRUS Rack e supporto
IRUS
IRUS 40.122 Manuale utente
IRUS
IRUS I101 Manuale utente
IRUS
IRUS I101 Manuale utente
IRUS
IRUS Advertising cube 40.121 Manuale utente
IRUS
IRUS I114 Manuale utente
IRUS
IRUS I112 Manuale utente
IRUS
IRUS Attachment module 180 VIII Manuale utente
IRUS
IRUS Advertising cube 40.126 Manuale utente
IRUS
IRUS I102 Manuale utente
IRUS
IRUS Kabine Z110 Manuale utente
