ISA MARIN 340 Manuale utente
1
MARIN
EN 428001373037
Use and maintenance manual
ISA S.p.A.
Via Madonna di Campagna 123 - 06083 Bastia Umbra PG - Italie
www.isaitaly.com
MARIN
340 ●470
2
MARIN
EN 428001373037
Use and maintenance manual
1. NOTES / WARNINGS 4
2. MANUFACTURER 9
3. WARRANTY TERMS AND CONDITIONS 9
4. IDENTIFYING THE EQUIPMENT 10
5. SAFETY 11
5.1 SAFETY DEVICES INSTALLED 11
5.2 FIXED GUARDS 11
5.3 ISOLATING THE ELECTRIC POWER SUPPLY 11
5.4 CIRCUIT FAULTS 11
5.5 WARNING SIGNS (IF ANY) 11
5.6 FALLING OBJECTS 11
5.7 COOLING 11
5.8 FOOD SAFETY (PACKAGED PRODUCTS) 11
6. RESIDUAL RISKS 12
6.1 RISK OF CONTACT WITH LIVE PARTS 12
6.2 FIRE 12
6.3 EXPLOSIVE ATMOSPHERE 12
6.4 SLIPPING 12
6.5 TRIPPING 12
7. DISPOSAL OF WASTE MATERIAL 13
8. MAINTENANCE 14
9. FAULTS - TECHNICAL AFTER-SALES ASSISTANCE 15
10. STORAGE 16
11. PROLONGED APPLIANCE SWITCH-OFF 16
12. INSTALLATION 17
12.1 UNPACKING 17
12.2 MANUAL HANDLING - REAR HANDLES 18
12.3 POSITIONING - LEVELING 19
12.4 WALL MOUNTING 20
12.5 ENVIRONMENTAL CONDITIONS 20
12.6 ELECTRICAL CONNECTIONS 20
13. COMPOSITION 21
14. USE 21
14.1 GRIDS (INSTALLATION) 22
14.2 MAXIMUM GRID LOADS 23
15. TECHNICAL SPECIFICATIONS 24
16. CONTROL PANEL 25
16.1 USER INTERFACE 26
17. CLEANING 29
17.1 INTERNAL 29
17.2 CONDENSING UNIT 30
17.3 DEFROST WATER COLLECTION TRAY (IF PRESENT) 30
3
MARIN
EN 428001373037
Use and maintenance manual
The manual contains symbols to attract the reader's attention and highlight particularly important aspects. The table below illustrates the
meaning of the various symbols used.
Read the manual
Danger: Live electrical parts
Attention / hazard
Information
Eye check
Danger: Slipping
Danger: Tripping
Earthing
High temperature hot surfaces
Danger: Flammable material
Use of protective clothing
Requests for maintenance or operations must be carried out by qualied staff or technical after-sales centres
Important information
Operations that must be performed by two persons
Notes / warnings
Waste disposal
Recyclable materials
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
4
MARIN
EN 428001373037
Use and maintenance manual
1.
NOTE
The content of this manual is of a technical nature and the property of ISA. It is
forbidden to reproduce, disclose or modify, either wholly or partially, its content
without written authorisation. Any infringement will be legally pursued.
The manual and the conformity certicate are an integral part of the equipment and
should always accompany the product in the event of a transfer to a new location or
to a new owner. The user is responsible for the integrity of these documents, for their
consultation and during the whole life cycle of the equipment itself. Keep this manual
in a safe place.It should be available for consultation near the equipment at all times.
If lost or destroyed, you can request a copy of the manual from ISA by specifying
the exact model, serial number and year of manufacture. The manual reects the
manufacturing technology at the time of supply.The manufacturer reserves the right
to modify its products in any way it deems necessary, with no obligation to update
manuals and machines relating to previous manufacturing batches.
The equipment can be used by children no younger than 8 and by persons with
reduced physical, sensory or mental capabilities, or lacking experience or necessary
knowledge, as long as supervised or after having received training regarding safe use
of the equipment and have an understanding of the inherent risks involved. Do not
allow children to play with the device. The cleaning and maintenance that the user will
carry out must not be undertaken by children without supervision.
Always refer to this manual before going ahead with any operation. Before doing any
type of work, disconnect the equipment from the power supply. Any work on electric
and electronic parts or cooling system components should only be carried out by
trained personnel in compliance with current laws.
The Manufacturer cannot be held liable for any damage to persons, animals or to the
product in the following cases:
• Improper use of the equipment or use of the appliance by unqualied or
unauthorised personnel.
• Failure to comply with current legislation.
• Incorrect installation and/or power supply faults.
• Failure to observe the instructions contained in this Manual.
• Failure to follow the maintenance schedule.
• Unauthorised modications.
• installation of non-original spare parts in the equipment.
• Installation and use of the equipment for purposes other than those for which it
was designed and sold.
• Tampering with or damage to the power supply cable.
NOTES / WARNINGS
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
5
MARIN
EN 428001373037
Use and maintenance manual
Liability for applying the safety instructions contained in this manual is held by the
technical personnel responsible for the intended use of the equipment, who should
ensure that authorised personnel:
• Are qualied to carry out the requested activity.
• Are aware of and carefully comply with the instructions contained in this document.
• Are aware of, and apply, the general safety standards applicable to the equipment.
The buyer is responsible for training personnel using the appliance on the risks,
safety devices and general health and safety rules required by the laws of the country
where the appliance is installed. Users/operators should be aware of the position of
all the controls and how they work, as well as of the features of the appliance. They
should also read this manual in its entirely. Maintenance work should be conducted
by qualied personnel after the appliance has been prepared adequately.
DANGER
Unauthorised tampering or replacement of one or more parts of the appli-
ance, use of accessories that modify the use of the same and use of spare
parts different to those recommended, can become the cause of injury.
DANGER
Any work conducted on the appliance must involve disconnection from the
power socket and in any case, none of the protective elements (grid, casing)
should be removed by non-qualied staff.The appliance should not be operat-
ed when these protective elements have been removed. Before carrying out
any cleaning, maintenance or replacement operation, disconnect the equip-
ment from the mains by unplugging it from the electrical socket. During these
operations the operator must be able to ensure that the plug remains discon-
nected.
NOTE
Particularly complex installation and maintenance tasks are not documented
in this manual to avoid compromising the functionality and safety of the de-
vice and should be carried out by manufacturer’s specialised technicians.
Never use electric devices inside this appliance. Do not use mechanical devices or
other means to accelerate the defrosting process, other than those recommended by
the manufacturer. Keep the air vents in the casing of the appliance or in the structure
built into the wall free of obstructions. Do not damage the refrigeration circuit.
The A-weighted emission sound pressure level is less than 70 dB(A).
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
6
MARIN
EN 428001373037
Use and maintenance manual
RISK OF EXPLOSION
Do not store products containing ammable propellants or explosives.
ISA uses materials of the best quality and as they enter the company, we constantly
monitor their storage the use as part of the manufacturing process to prevent dam-
age, deterioration and failure. All manufacturing elements have been designed and
manufactured in order to guarantee high safety and reliability standards. All appli-
ances are subjected to a strict testing procedure before delivery.However, please bear
in mind that product performance over time depends on correct use and adequate
maintenance. This manual contains the necessary instructions to maintain the appli-
ance’s initial appearance and functions over time.
The use and maintenance manual contains the information required to understand
the operating modes of the appliance and for its correct use, in particular: the tech-
nical description of the various functional units, accessories and safety systems, op-
eration, use of instrumentation and interpretation of any diagnostic warnings, main
procedures and information relating to the ordinary maintenance operations. For
correct use of the appliance, the working environment should comply with current
health and safety standards.
The safety requirements, indications, standards and notes illustrated in the various
chapters of the manual are aimed at establishing a code of conduct and a series of
obligations to be observed when performing the various activities, in order to create
safe conditions for personnel, the equipment and the surrounding environment.
The safety standards reported in this document are intended for trained, authorised
personnel responsible for:
• Transport
• Installation
• Operation
• Management
• Maintenance
• Cleaning
• Decommissioning
• Disposal
ATTENTION
Reading of this manual, albeit in full, is no substitute for adequate user experi-
ence. Therefore it should only be considered a useful reminder of the technical
features and the main operations to be performed.
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
7
MARIN
EN 428001373037
Use and maintenance manual
WARNING
The installers and users MUST read and understand the instructions
contained herein before any operation on the appliance.
STAFF TRAINING
The buyer is responsible for ensuring personnel who will use the appliance and
maintenance technical staff are instructed and trained adequately. The manufacturer
is available for advice, clarications, etc. so that the operator and technical staff can
use the appliance correctly. To ensure operator safety, appliance devices should be
kept in constant working order. This manual is intended to illustrate the use and
maintenance of the appliance.The operator has a responsibility and duty to carefully
observe the instructions contained within it.
Failure to comply with safety standards may result in injury to personnel and
damage to the equipment components and control unit. The user can contact the
dealer to request additional information not contained in this document, or suggest
improvements, at any time.
Before delivery to the customer, it is essential that the specialised technical
staff check that the equipment is working correctly to ensure maximum per-
formance is obtained
.
REFRIGERANT
R744
The refrigerant R744 is a gas that is compatible with the environment. Be very
careful when transporting and installing the appliance and during scrapping to
avoid damaging the refrigerant circuit pipes.
IN THE EVENT OF DAMAGE:
Keep ames or sources of ignition away from the appliance. Properly ventilate
the premises for a few minutes. Turn the unit off, pull out the plug. Notify the
customer service department.
ATTENTION
The refrigerant system works at High Pressure. Do not tamper with
the system, but call a specialised and qualied technician before
disassembly.
ATTENTION
Maintenance must be performed by qualied personnel that has been to work
with ammable refrigerants.
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
8
MARIN
EN 428001373037
Use and maintenance manual
REFRIGERANT
R290
The refrigerant R290 is a gas that is compatible with the environment, but is highly
ammable. Be very careful when transporting and installing the appliance and
during scrapping to avoid damaging the refrigerant circuit pipes.
IN THE EVENT OF DAMAGE:
Keep ames or sources of ignition away from the appliance. Properly ventilate the
premises for a few minutes. Turn the unit off, pull the plug. Notify the customer
service department. The more refrigerant containing an appliance, the greater
must be the environment in which there is the unit. In areas too small, in the event
of leakage can form a ammable mixture of air and gas. The volume of the room
where the appliance is installed must be at least 19 m³ for each cooling system
present in the room.
ATTENTION
Maintenance must be carried out by trained technical personnel authorised to
work on ammable refrigerants.
REFRIGERANT
R600a
The refrigerant R600a is a gas that is compatible with the environment, but is highly
ammable. Be very careful when transporting and installing the appliance and
during scrapping to avoid damaging the refrigerant circuit pipes.
IN THE EVENT OF DAMAGE:
Keep ames or sources of ignition away from the appliance. Properly ventilate the
premises for a few minutes. Turn the unit off, pull the plug. Notify the customer
service department. The more refrigerant containing an appliance, the greater
must be the environment in which there is the unit. In areas too small, in the event
of leakage can form a ammable mixture of air and gas. The volume of the room
where the appliance is installed must be at least 17 m³ for each cooling system
present in the room.
ATTENTION
Maintenance must be carried out by trained technical personnel authorised to
work on ammable refrigerants.
9
MARIN
EN 428001373037
Use and maintenance manual
3. WARRANTY TERMS AND CONDITIONS
The seller guarantees their equipment for a period of 12 (twelve) months from delivery.
The warranty includes repairs or replacements of any faulty parts due to manufacturing processes or installation after written
communication has been received, stating the appliance serial number and date of installation.
Not included in the warranty:
• Incorrect use of the appliance.
• Incorrect connection to the power grid.
• Normal wear of the components (such as breakage of the compressors, of the neon/LED lights, etc.)
if not due to manufacturing defects.
• Calls for installation, technical instructions, adjustments, condenser cleaning.
If the seller's technical staff detect any tampering, unauthorised repairs or inappropriate use of appliance the warranty will be
invalidated.
Shipment of components covered by the warranty is freight collect only.
Any damage to the appliance detected at the time of delivery due to transport must be reported on the same shipping note to
claim compensation from the carrier.
The seller cannot be held liable in the event of damage to accepted products due to appliance faults.
2. MANUFACTURER
ISA S.p.A.
Via Madonna di Campagna 123
06083 Bastia Umbra PG - Italy
T. +39 075 801 71
F. +39 075 800 09 00
E. customerserviceisaitaly.com
www.isaitaly.com
10
MARIN
EN 428001373037
Use and maintenance manual
4. IDENTIFYING THE EQUIPMENT
Find the label axed on the machine to read the technical data.
Check the machine model and the power supply voltage before you perform any operation.
If discrepancies are found, contact the manufacturer or the company that offer the supply immediately.
1
IDENTIFICATION OF THE COMPANY RESPONSIBLE FOR THE PRODUCT
2 SYMBOLS OF COMPLIANCE
3 TYPE
4 MODEL NAME
5 ARTICLE
6 PRODUCTION DATE
7 PRODUCTION ORDER
8 CUSTOMER ORDER
9 PRODUCT CLASS
10 SERIAL NO.
11 OWNER REGISTRATION NUMBER
12 POWER SUPPLY VOLTAGE
13 SUPPLY FREQUENCY
14 FUSE VALUE
15 LAMP POWER
16 ELECTRICAL RESISTOR ABSORPTION
17 NOMINAL POWER (NORMAL OPERATION)
18 POWER (DEFROSTING)
19 MINIMUM PRESSURE
20 MAXIMUM PRESSURE
21 SAFETY CLASS
22 RATED CURRENT
23 CURRENT DURING DEFROSTING
24 SHELF LOAD
25 TANK LOAD
26 TYPE OF COOLANT
27 WEIGHT OF COOLANT
28 GROSS VOLUME
29 EXPANDING INSULATION AGENT
30 WEEE MARK
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ISA Frigorifero
