iScooter iX6 Manuale utente
1. Package Contents 01
2. Product Overview 02
3. Control Panel 03
4. Assembly 05
5. Riding Notice 06
6. Charging 06
7. First Ride 07
8. Riding Basics 08
9. Safety Instructions 09
10. Dangerous Actions (No Attempting!) 10
Contents
11. Disc Brake Adjustment 12
12. Daily Care and Maintenance 13
13. Specifications 14
14. Limited Warranty Statement 15
15. Question & Answer 17
16. Contact Us 18
EN
Package Contents
When unboxing your iX6 electric scooter, please verify that
the below items are included in the package. If anything is missing or
damaged, please contact iscooter customer service for support:
Keep the package box to ship back the scooter when necessary.
01
1 x Car Bag 2 x NFC1 x Charger 3 x Tool 6 x Tool
02
Product Overview
Headlight
Front
Suspensions Rear Suspensions
Brake
Adjustable Lock
Rear Fender
Motor
Deck
Charging Port
Ambient Lights
Turn Signal
Tire
03
Control Panel
Speed Distance riding per hour.
Three riding modes，after power on, press +/- key to switch between ECO,
STD, and TURBO modes.
5-bar battery level.
Battery Level
Riding Mode ECO: First gear STD: Second gear TURBO: Third gear
Displayed Content
Gear value Turn left Locking
Fault Cruise
Headlights Dual drive
Single drive
Turn right
Battery voltage
Battery power
Total mileage
Single mileage
Controller current
indicator bar
Real time speed
Third gear
Second gear
First gear MPH
Km/h
Maximum speed
Average speed
Error
Error
04
Mode settings:
After turning on the scooter, press and hold 'M' and 'Light' buttons for about 10 seconds.
Release the 'Light' button first, then release 'M' button to enter setting mode.
P01: Kilometer/mile selection setting
P02: Voltage level setting: 36V/48V/60V/72V; the default is 48V, and the undervoltage
value is automatically adjusted when the voltage is selected (this item is not recommend-
ed to be adjusted)
P03: Wheel diameter: unit, inch; 8.0-12.0, default 10, increases by 0.5 for each change
(this item is not recommended to be adjusted)
P04: Number of magnetic poles for speed measurement: range: 1-100, default 30
(default value is ideal ) (this item is not recommended to be adjusted)
P05: Cruise selection: 0 means cruise off, 1 means cruise on; after the cruise is turned
on, the cruise icon appears on the display
P06: Zero start/non-zero start setting, 0: zero start; 1: non-zero start
P07: Top speed setting 10%-100%; 00 means 100%
P08: Sleep time setting: 0, sleep off; other numbers are sleep time, range: 1-30; default 5
minutes
P09: Backlight brightness adjustment: Level 1 is the darkest, Level 3 is the brightest
P99: Restore factory default parameters; press and hold the + button for 5 seconds
during P99
ODO: Travel distance reset; long press the + button for 5 seconds at ODO
NFC key
05
Assembly
1. Open the package, take out the E-scooter
and its accessories. 2. Press the folding mechanism and lift the T-bar
upright. Push down the kickstand.
3. Cut the tapes on the handlebar.Lift the
handlebars on both sides up and slide
in to secure.(Tips: Don't tighten only
one side one time, visit www.iscooter.com for
additional help with assembly, including a
step-by-step video.)
4. Open the adjustable lock, adjust the handlebar
to the height you needed, then close the lock.
06
Riding Notice
The iscooter iX6 electric scooter is a leisure device. But once they're in a public area, they'll be
seen as vehicles, subjecting to any risks faced by vehicles. For your safety, please follow
instructions in the manual and traffic laws and regulations set forth by government and regulatory
agencies.
● At the same time, you should understand that risks cannot be entirely avoided as others may
violate traffic regulations and drive incautiously, and you're exposed to road accidents just as
when you're walking or biking. The faster the scooter is, the longer it takes to stop. On a smooth
surface, the scooter may slip, lose balance, and even result in a fall. Thus it is crucial that you use
caution, keep proper speed and distance, especially so when you're unfamiliar with the place.
● Respect pedestrians' Right of Way. Try not to startle them while driving, especially children.
When you ride from behind pedestrians, ring your bell to give them a heads-up and slow your
scooter to pass from their left (applicable to countries where vehicles drive on the right). When
you ride across pedestrians, keep to the right at a low speed. When you drive across pedestrians,
keep the lowest speed or getting off the vehicle.
● Closely follow the safety instructions in the manual. iscooter shall not be liable for any financial
losses, physical injuries, accidents, legal disputes and other interest conflicts resulted from
actions that violate user instructions.
● Do not lend your scooter to whoever doesn't know the operations. And when you do lend it to
your friends, please take the responsibility to ensure he/she knows the operation and wears the
safety gear.
● Check the scooter before every use. When you note loosen parts, low battery alerts, excessive
wear, strange sounds, malfunctions and other abnormal conditions, stop riding.
● WARNING – Risk of Fire – No User Serviceable Parts.
Charging
Your scooter will be fully charged when the LED indicator on the
charger changes to green from red.
With charging protection, it will cut off charging automatically
after fully charge.
Even so, we still don't recommend charging your scooter for a long
time more than 24 hours at one time.
Do not connect the charger if the charging port is wet.
Keep the charging port closed when not charging.
07
First Ride
1. Press the power switch for 1-3 seconds and then release, LCD display is on — it
means the electric scooter is successful turned on.
2. Press the headlight button after power on to turn on the headlight and
the ambient light on the deck.
3. Zero start: after power-on, press the accelerator and the motor of the scooter
will rotate, and the scooter will go forward. (The throttle works even when the
E-scooter is not in motion.)
4. Non-zero/Kick-and-go start: With kick-and-go start mode on, scoot the E-scooter
for the throttle to operate.
5. Riding mode: After power on, press +/- key to switch between ECO, STD, and
TURBO modes. (The default mode is low-speed ECO at first power-on.)
6.1 Comfort mode: the speed is 10km/h in 1st gear,15km/h in 2nd gear,25km/h in 3rd gear
6.2 Off-road mode: the speed is 15km/h in 1st gear,30km/h in 2nd gear,45km/h in 3rd gear
Mode switching: Short press the m key five times continuously after power on, the
meter displays 45km/h, indicating that the setting is successful. Switch comfort mode:
After restarting the scooter again, short press the M button five times in a row, and the
meter displays 25km/h, indicating that the setting is successful.
Power Switch
M
08
Riding Basics
Wear a helmet, elbow pads, and knee pads in
case of falls and injuries either you are a
beginner learning to ride or you are a
seasoned rider.
1.Turn the power on, and check the battery
level indicator.
2.Stand with one foot on the deck and one
foot on the ground. Scoot yourself with the
foot on the ground.
3.When the scooter starts to move forward,
put both feet on the deck and press the
accelerator. (The accelerator initiates once
the speed exceeds 3 mph.)
4.Release the accelerator and the kinetic
energy recovery system (KERS) initiates
automatically to brake slowly; And squeeze
the brake lever for a sudden brake.
5.Tilt your body to the steering direction as
you turn, and slowly turn the handlebar.
Indice
Altri manuali iScooter Scooter
iScooter
iScooter i9MAX Manuale utente
iScooter
iScooter iK2 Manuale utente
iScooter
iScooter i9 Manuale utente
iScooter
iScooter iX4 Manuale utente
iScooter
iScooter 1S Manuale utente
iScooter
iScooter iX4 Manuale utente
iScooter
iScooter i8 Manuale utente
iScooter
iScooter iX5 Manuale utente
iScooter
iScooter i9 Manuale utente
iScooter
iScooter iX5 Manuale utente
