ISIC DuraMON15 Istruzioni per il montaggio
User Reference Manual
DuraMON15 LED
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 1
Disclaimer
ISIC A/S makes no representation or warranties with respect to the contents or use of this manual,
and specifically disclaims any express or implied warranties of merchantability or fitness for any
particular purpose. Further, ISIC A/S reserves the right to revise this publication and to make
changes to its content at any time, without obligation to notify any person or entity of such revisions
or changes.
Image sticking: If the monitor is operated with static images (logo’s etc) it will inevitably lead to
images sticking on the display (like on old CRT’s). This is not a permanently situation and can be
removed by operating the monitor with a completely black screen.
FCC Warning
Computing devices and peripherals generate and radiate radio frequency energy, and if not
installed and used in accordance with the instructions advised by ISIC A/S, it may cause
interference to radio communication.
The DuraMON series, manufactured by ISIC A/S, is designed to comply with the emerging generic
EEC standards, that cover applications in maritime environment.
Classification
The monitor is classified as “protected from the weather” according to IEC 60945 ed.4 (former class
b).
Approvals
Approval according to IACS E10 ed. 5 and IEC 60945 ed. 4, Maritime navigation and radio
communication equipment and systems – General requirements.
ISIC A/S is complying with the WEEE directive within the European Union, stating that electronic and
electric products must be collected separately.
Products are marked according to the directive.
Copyright 2012 ISIC A/S
ISIC PN: 05587-000 rev. A
ISIC A/S
Edwin Rahrsvej 54
DK-8220 Brabrand
Denmark
Phone: +45 70 20 70 77
Fax: +45 70 20 79 76
Web: http://www.isic-systems.com
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 2
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 3
Table of Contents
1FEATURES...............................................................................................................................................................4
2GENERAL CONSIDERATIONS ON INSTALLATION AND OPERATION..................................................5
3DURAMON CONNECTIONS ................................................................................................................................6
4DURAMON FRONT PANEL CONTROLS ..........................................................................................................6
5OSD............................................................................................................................................................................7
6SERIAL CONNECTION PIN-OUT.....................................................................................................................11
7DURAMON COMMUNICATION PROTOCOL................................................................................................11
8DDC/CI COMMANDS...........................................................................................................................................12
8.1VCP FUNCTIONS................................................................................................................................................12
9TECHNICAL SPECIFICATIONS DURAMON15 LED....................................................................................13
10MECHANICAL OUTLINE DURAMON15 LED............................................................................................14
11COMPASS SAFE DISTANCE..........................................................................................................................15
12POWER CONSUMPTION................................................................................................................................15
13TROUBLESHOOTING.....................................................................................................................................15
14SERVICING THE UNIT ...................................................................................................................................15
15TERMS, ACRONYMS AND ABBREVIATIONS...........................................................................................16
16ISIC INFO / SUPPORT .....................................................................................................................................17
17REVISION HISTORY.......................................................................................................................................18
18APPENDIX A: PIXEL POLICY.......................................................................................................................19
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 4
1Features
Congratulations on your purchase of a DuraMON product. This short form manual is designed to get
you started working with your new DuraMON.
The DuraMON series of monitors are all made as rugged monitors especially designed for the
demanding operating conditions at sea.
The DuraMON series are tested for full compliance to marine-standards IACS E10 and IEC 60945.
The monitor comes with excellent brightness and contrast levels that ensure a good readability thus
making it very eye-friendly. For the best picture quality, always use a double shielded DVI cable
with ferrites, like the one supplied with the monitor.
Backlight LED technology
Direct dimming control (0-100%) from UP/DOWN buttons.
Full settings control via menu and limited settings over serial link or DDC.
Anti-glare coated glass.
IP65 protection and liquid resistant front.
It is important to notice that, when powered off, the product still consumes some power from the
mains. To cut off the power from the product it is necessary to unplug its power cord from the
mains.
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 5
2General considerations on Installation and
Operation
The DuraMON is designed to work at conditions according to IEC 60945. However, keeping the
temperature and vibration level at a minimum will extend the life time of the product. ISIC
recommend operating this product at normal room temperature (20-25 °C), with the lowest level of
vibration and humidity.
Installation of the DuraMON
In order to obtain the best possible operating conditions, please note the following precautions.
-Room for cooling.
When designing the cabinet/console for the DuraMON, please ensure that air can flow
freely around the cabinet, in order to avoid any unnecessary rise in temperature. If it is
not possible to have an adequate natural airflow, use a fan to force the airflow to be
higher.
-Mounting positions
To obtain adequate cooling by convection ISIC recommends that the DuraMON is
mounted at least 30 degrees from horizontal. If this is not possible, forced cooling must
be applied directly to the unit in order not to overheat it.
-Sunlight
If the unit can be exposed to direct sunlight, there is a potential risk that the unit can be
overheated. Please take measures to prevent direct sunlight. Do also consider forced
cooling on the back of the unit.
3DuraMON connections
Below is a view of connections to the monitor. The default inputs are: power, RS-232, DVI and
VGA.
RS‐232VGADVIPOWER
4DuraMON front panel controls
ON/OFFLED MENU DOWN UP ENTER
ON/OFF:
This button is used to turn the product on or off. Pressing it will toggle the power..
LED:
The LED will change color from green to red to indicate power down. LED brightness will decrease
with decreasing backlight brightness.
If there is no active input signal, the monitor will display a dialog box to inform the user to check the
signal cable.
MENU:
Pressing this button the OSD menu will appear. See OSD section for details.
UP/DOWN:
Used to adjust backlight brightness or to navigate and adjust settings in menus.
ENTER:
This button is used to confirm selections in the OSD menu. If Source isn’t set to AUTO in the OSD, use
this button to switch to an active source.
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 6
5OSD
With the OSD (On Screen Display) you can modify the settings and control the special features of
the DuraMON as described on the next pages.
To enter the OSD press “MENU” button.
To navigate the OSD use the “UP” and “DOWN” buttons and press “ENTER” to select a specific
setting. To return a previous menu point, press the “MENU” button.
PICTURE
Brightness:
Use to adjust the Backlight Brightness.
Increasing the value will increase the
luminance. Decreasing it will decrease the
luminance. Be aware that low luminance
may inhibit visibility of information on the
screen, particularly at night.
Default value = 90
Contrast:
Use to adjust the Contrast. Increasing the
value will increase the visibility of dark
details in the picture. Decreasing the value
will decrease the visibility of dark details in
the picture. Be aware that too high or low
contrast may inhibit visibility of information
on the screen, particularly at night.
Default value = 50
Sharpness:
Use to adjust the Sharpness of the picture.
Increasing the value will make the picture
more detailed. Decreasing the value will
make the picture less detailed.
Default value = 2
H Position (VGA only):
Use to adjust the position of the signal left
or right. Increase the value to move the
picture right. Decrease the value to move
the picture left.
Default value = 50
V Position (VGA only):
Use to adjust the position of the signal up
or down. Increase the value to move the
picture up. Decrease the value to move
the picture down.
Default value = 50
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 7
Clock (VGA only):
Use to adjust the frequency of the clock
signal.
Default value = 50
Phase (VGA only):
Use to adjust the clock phase. Adjusting
this value will remove shadows in the
picture.
Default value = Auto detected
COLOR
Color Status Management
Use to adjust the color temperature of the
picture.
Default value = User
Red (VGA only):
Use to adjust the Red gain. Increase the
value to make the picture more reddish.
Decrease to make it less reddish.
Default = 50
Green (VGA only):
Use to adjust the Green gain. Increase the
value to make the picture more greenish.
Decrease to make it less greenish.
Default = 50
Blue (VGA only):
Use to adjust the Blue gain. Increase the
value to make the picture more bluish.
Decrease to make it less bluish.
Default = 50
Auto Color (VGA only):
Use to auto adjust the ADC values for Red,
Green and Blue.
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 8
OSD
Language:
Use to change the OSD language.
Default: English
H Position:
Use to adjust the position of the OSD menu
left or right. Increase the value to move the
OSD right. Decrease the value to move the
OSD left.
Default value = 50
V Position:
Use to adjust the position of the OSD menu
up or down. Increase the value to move
the OSD up. Decrease the value to move
the OSD down.
Default value = 50
Transparency:
Use to adjust the transparency of the OSD
menu. Decreasing the value will make the
OSD more transparent. Increasing the
value will make the OSD more solid.
Default value = 33
OSD Time:
Use to select how long time the OSD menu
will be displayed. When no actions have
been carried out in the specified time, the
OSD menu will be removed.
Default value = 10 seconds
SETUP
Source:
Use to change the active source. Selecting
AUTO will scan for an active signal. If both
VGA and DVI signal are found, DVI will be
preferred.
Default = Auto
Factory Reset:
Use to restore all settings to the default
values. By activating this function, all
settings made by the user will be lost and
the monitor will be brought back to known
operating conditions.
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 9
User Reference Manual – DuraMON15 LED
PN: 05587-000 Rev A Page 10
Aspect:
Use to select if aspect ratio should be
applied to the picture. Off will stretch the
picture to fill the screen. On will fill the
screen, but keep the aspect ratio. This will
result in black bands on the border of the
screen.
Default = Off
Set ID:
Use to enable/disable serial
communication through the RS-232 port.
Enabling it will allow the user to control
settings in the monitor. See the “DuraMON
communication protocol” section for
details.
Default = Off
Altri manuali per DuraMON15
1
Indice
Altri manuali ISIC Monitor
