ISON IS-C3050 Manuale utente

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 1 Rev 1.1

IS-C3050 Wireless Terminal

User Guide

ISON Basic Wireless Terminal 2G / 3G

Model Number:

IS-C3050

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 2 Rev 1.1

Information provided by ISON Technology Co., Ltd, (herein known as ‘the company’), is believed to be

accurate and reliable. However, the company assumes no responsibility for its use, nor any

infringement of patents or other rights of third parties, which may result from its use. No license is

granted by implication or otherwise under any patent rights of the company other than for circuitry

embodied in the company’s products. The company reserves the right to change the circuitry and

specifications at any time without notice. This document is subject to change without notice.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including but not limited to photocopying, recording, transmitting via fax and/or modem

devices, scanning, and/or information storage and retrieval systems for any purpose without the

expressed written consent of the company.

WARNING: The ISON GSM wireless terminal is a RF product intended for interfacing and operating

with a host device. Local relevant RF regulations such as allowed frequencies and usage in commercial

flights must be observed. Safety instructions must be included in the manuals of the host device. ISON

Technology Co., Ltd assumes NO liability for customers, who fail to comply with these precautions.

Service and Support

TBA

Download Information

TBA

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 3 Rev 1.1

Revision History

Version

Date

Description

1.0

Mar 2014

1st Release

1.1

April 2014

2nd Release

1.2

May 2015

3rd Release

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 4 Rev 1.1

CONTENTS

1INTRODUCTION............................................................................................................................ 7

1.1 Description.............................................................................................................................7

1.2 Highlights ...............................................................................................................................7

1.3 Functional Block diagram.......................................................................................................9

1.4 Main Features and Services................................................................................................. 10

1.4.1 Operating Modes.............................................................................................................. 10

1.4.2 wireless terminal Features and Electrical Specifications................................................... 11

1.5 Precautions.......................................................................................................................... 12

2MECHANICAL DESCRIPTION..................................................................................................... 13

2.1 Overview.............................................................................................................................. 13

2.2 Dimensions .......................................................................................................................... 13

3ELECTRICAL INTERFACE DESCRIPTIONS............................................................................... 14

3.1 Right side view (DB9 connector) .......................................................................................... 14

3.2 Left side view (DC Jack & Industry connector)...................................................................... 15

3.3 Frond view (Antenna & LED )............................................................................................... 16

3.4 SIM card holder.................................................................................................................... 17

3.5Demo process.................................................................................................................... 17

4OPERATING NOTE...................................................................................................................... 30

4.1 Power on the Modem ........................................................................................................... 30

4.2 Reset to default.................................................................................................................... 30

4.3 External input x2................................................................................................................... 30

4.4 External Relay x1 ................................................................................................................. 30

4.5 DB9 Connector..................................................................................................................... 30

4.6 Install SIM card..................................................................................................................... 30

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 5 Rev 1.1

5ISON Protocol............................................................................................................................... 31

6SALES CONTACT........................................................................................................................ 64

7ORDERING INFORMATION......................................................................................................... 64

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 6 Rev 1.1

List of Figures

Figure 1: Functional Block Diagram for IS-C3050.................................................................................. 9

Figure 2: Chassis Dimension for IS-C3050.......................................................................................... 13

Figure 3:RS232/RS422/RS485 for IS-C3050....................................................................................... 14

Figure 4: DC and Industry connector for IS-C3050 .............................................................................. 15

Figure 5: Antenna Connector for IS-C3050.......................................................................................... 16

Figure 6: SIM Card Holder for IS-C3050.............................................................................................. 17

Figure 7: Binary Protocol Exchange..................................................................................................... 31

List of Tables

Table 1: Operating Modes ................................................................................................................... 10

Table 2: Features and Specifications................................................................................................... 11

Table 3: Chassis Dimensions and Mechanical Description for IS-C3050 ............................................. 13

Table 4: DB9 pins define for IS-C3050................................................................................................. 14

Table 5: Interfaces and Indicators Description of IS-C3050 ................................................................. 16

Table 6: LED functions of IS-C3050..................................................................................................... 16

Table 7: General message structure.................................................................................................... 32

Table 8: link control characters set....................................................................................................... 33

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 7 Rev 1.1

1 INTRODUCTION

1.1 Description

The ISON IS-C3050 is a Dual Band 2G/3G wireless terminal designed for RS232/RS422/RS485

communication over TCP/IP via any readily available 2G/3G carrier network. Overall, it is more cost

and time effective to use remote solutions to combine Machine to Machine over diverse locations

without having first to establish and invest in a huge complex network.

The IS-C3050 wireless terminal uses the DB9 Connector to provide data communication interface and

the DC jack to provide power input. LEDs are used to indicate the status of the wireless terminal.

The IS-C3050 wireless terminal can be used to provide a wireless communication link to many

applications, including metering, fleet and asset management, vending, security and alarm monitoring,

e-maintenance and other telemetry applications.

1.2 Highlights

Interface

DC jack Connector for power

DB9 connector(Female)

SMA Female Connector (GSM antenna connector)

SIM card reader

1 * relay

2 * I/O pins

General Features

•Frequency Range : EU GSM/GPRS/EDGE: 900/1800MHz和UMTS/HSPA+: 900/2100MHz

US GSM/GPRS/EDGE: 850/1900MHz和UMTS/HSPA+: 850/1900MHz

•Protocol Stack : TCP/UDP/HTTP/FTP

•Power Supply Input : 5 to 32 VDC

•Relative Humidity: 90% MAX.

•Operation Temperature : -40°C ~75°C

•Switch Off Protection : +90°C

•Dimensions (L) x (W) x (H) : 119.5 x 89 x 26.9 mm (excluding connectors)

•Weight : 200g

•Casing Material : Metal

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 8 Rev 1.1

Data Transmission

•GPRS : Multi-slot Class 12, Mobile Station Class B.

•EDGE : Multi-slot Class 12

•CSD : -9.6kbps, non-transparent, V.110

•SMS : MT, MO, Cell Broadcast, Text and PDU mode.

•Serial Parameter :

–Data Bits : 5, 6, 7, 8

–Stop Bits : 1, 1, 5, 2

–Parity : None, Even, Odd, Space, Mark

–Flow Control : RTS/CTS, DTR/DSR

–Baudrate : 9600~115200 selectable

–Serial signals : TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST(reset circuit), GND

•Relay : 1 output with current carrying capacity of 1A @ 24 VDC

•Digital Inputs : 2 electrically isolated inputs:

–+13 to 30V for state “1”(On)

–+3 to -30V for state “0”(Off)

•ESD Protection : 15KV

•Data Buffering : 1M

•Data Delimiter : Yes

•Data Length Packing : Yes

•CCP/CCU : Yes

–API : ISON Cellular Control Protocol (=CCP)

–Utility : ISON Cellular Control Utility (=CCU)

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 9 Rev 1.1

1.3 Functional Block diagram

Figure 1: Functional Block Diagram for IS-C3050

The IS-C3050 consists of a fully certified (CE /NCC approved) GSM/GPRS engine, SIM card holder

and power regulator.

The wireless terminal is supplied with power via the DC jack. The remaining DB9 connector are used

for data communications.

The SMA female connector provides the air interface to an external 50 ohm antenna specified for the

correct frequency band.

DB9

www.ison.com.tw

IS-C3050 WIRELESS TERMINAL User Guide 10 Rev 1.1

1.4 Main Features and Services

The IS-C3050 performs a set of telecom services (TS) according to GSM standard phase 2+, ETSI and

ITU-T. The services and functions of the IS-C3050 are implemented by issuing customized applications

embedded on the device, or by AT commands issued internally, or over the RJ45 to RS232 serial

interface.

1.4.1 Operating Modes

The table below briefly summarizes the various operating modes referred to in the following chapters.

Normal

operation

GSM / GPRS

SLEEP

Various power save modes set with AT+CFUN command. Software is

active to minimum extent. If the module was registered to the GSM

network in IDLE mode, it is registered and paging with the BTS in SLEEP

mode, too. Power saving can be chosen at different levels: The NON-

CYCLIC SLEEP mode (AT+CFUN=0) disables the AT interface. The

CYCLIC SLEEP modes AT+CFUN=7 and 9 alternately activate and

deactivate the AT interfaces to allow permanent access to all AT

commands.

GSM IDLE

Software is active. Once registered to the GSM network, paging with

BTS is carried out. The module is ready to send and receive.

GPRS IDLE

Module is ready for GPRS data transfer, but no data is currently sent or

received. Power consumption depends on network settings and GPRS

configuration (e.g. multi-slot settings).

GPRS DATA

GPRS data transfer in progress. Power consumption depends on

network settings (e.g. power control level), uplink / downlink data rates,

GPRS configuration (e.g. used multi-slot settings) and reduction of

maximum output power.

POWER

DOWN

Normal shutdown after sending the AT^SMSO command. Only a voltage regulator is

active for powering the RTC. Software is not active. Interfaces are not accessible.

Operating voltage (connected to BATT+) remains applied.

Airplane

mode

Airplane mode shuts down the radio part of the module, causes the module to log off from

the GSM/GPRS network and disables all AT commands whose execution requires a radio

connection. Airplane mode can be controlled by using the AT commands AT^SCFG and

AT+CALA:

• With AT^SCFG=MEopMode/Airplane/OnStart the module can be configured to enter the

Airplane mode each time when switched on or reset.

• The parameter AT^SCFG=MEopMode/Airplane can be used to switch back and forth

between Normal mode and Airplane mode any time during operation.

• Setting an alarm time with AT+CALA followed by AT^SMSO wakes the module up into

Airplane mode at the scheduled time.

Table 1: Operating Modes

Indice

Altri manuali ISON Terminale touch

ISON

ISON IS-C3100 Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente