J-Tech Digital NA-EX01R Manuale utente

Operating Instructions

Website: www.jtechdigital.com

Toll Free: 1-888-610-2818[US]

Email: Support@jtechdigital.com

NexAVTM HDBaseT 4K@60Hz HDMI

Extender Receiver 70M/40M

NA-6001

The HDBaseT HDMI Extender Receiver Control Path has been tested for

conformity to safety regulations and requirements, and has been certified for

international use. However, like all electronic equipment, the NA-EX01R should be

used with care. Please read and follow the safety instructions to protect yourself

from possible injury and to minimize the risk of damage to the unit.

Follow all instructions and warnings marked on this unit.

Do not attempt to service this unit yourself, except where explained in this

manual.

Provide proper ventilation, air circulation, and do not use near water.

Keep objects that might damage the device away and assure that the placement

of this unit is on a stable surface.

Use only the power adapter, power cords, and connection cables designed for

this unit.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power

to the device before cleaning.

SAFETY AND NOTICE

INTRODUCTION .......................................................................................................1

PACKAGE LIST.........................................................................................................1

FEATURES................................................................................................................1

PANEL DESCRIPTION .............................................................................................2

SYSTEM CONNECTION...........................................................................................3

SYSTEM CONNECTION...........................................................................................4

SPECIFICATION .......................................................................................................5

PANEL DRAWING ....................................................................................................6

TROUBLESHOOTING & MAINTENANCE................................................................7

TABLE OF CONTENTS

The NA-EX01R is a 4K HDBaseT Receiver to receive 1080p/4K HDMI signal over

CAT5e/CAT6a cable from HDBaseT Transmitter or Matrix Switcher up to 70m /40m

(PoH), and enables IR and RS232 pass-through to control source or display device

remotely. It also supports CEC.

1 x NA-EX01R Receiver

2 x Mounting Ears with 4 Screws

4 x Plastic Cushions

1 x RS232 Cable

1 x Power Adaptor (DC 24V, 1.25A)

1 x User Manual

Note: Please contact your distributor immediately if any damage or defect in the

components is found.

Support Full HD: Delivers high resolution image (1080p@60Hz@48

b/pixels/3D/4Kx2K).

Maximum transmission distance is 70m for 1080p and 40m for 4Kx2K over single

CAT5e/CAT6a cable.

High Bandwidth: 10.2Gps.

HDTV Compatible, use HDMI 1.4 and HDCP2.2 compliant.

Support CEC/IR/RS232 pass-through.

Support bi-directional PoH function.

Bi-directional RS232/IR control.

Use HDBaseT technology.

LED indicators show work status.

INTRODUCTION

PACKAGE LIST

FEATURES

No.

Name

Description

①

LINK LED

HDBT Link status indicator:

OFF: No Link.

GREEN: Link successful.

Blinking GREEN: Link abnormal.

②

HDCP LED

HDCP compliant indicator

OFF: No HDMI traffic (no picture).

GREEN: Traffic with HDCP.

Blinking GREEN: Traffic without HDCP.

③

Power LED

OFF: No power; RED: DC power present.

④

RS232

RS232 connector.

⑤

IR IN

Connect with 5V IR receiver (with carrier) to

collect infrared signal, work with far-end IR

OUT port.

⑥

IR OUT

Connect with 5V IR emitter to send infrared

signal, work with far-end IR IN port.

⑦

HDMI OUT

Connect with HDMI display.

⑧

HDBT IN

Connect to the HDBT OUT socket on the

transmitter via CAT5e/ CAT6a cable.

⑨

DC 24V

Connect with power supply (Not necessary if

transmitter connects with power adaptor).

123456789

PANEL DESCRIPTION

Usage Precautions

Verify all components and accessories included before installation.

System should be installed in a clean environment with proper temperature and

humidity.

All of the power switches, plugs, sockets and power cords should be insulated

and safe.

All devices should be connected before power on.

RXTX RXTX

Transmitter NA-EX01R Receiver

4K 40m

1080P 70m

Laptop

IR Receiver

Projector

Remote

Projector

IR Emitter

HDMI:

RS232:

IR:

HDBaseT:

SYSTEM CONNECTION

Connection Procedure

Step1. Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of

transmitter with HDMI cable.

Step2. Connect HDBT OUT port of transmitter and HDBT IN port of receiver, with

single CAT5e/CAT6a cable.

Step3. Connect HDMI displayer (such as HDTV) to HDMI OUT port of receiver with

HDMI cable.

Step4. Both transmitter and receiver have IR IN and OUT. When one end is used

as an IR receiver, the signal sent from the end can only be transmitted via

the other end.

For example: When “IR IN” of transmitter connects with an IR receiver, the

IR emitter must connect to IR OUT of Receiver.

Step5. Connect the RS232 port of the devices to be controlled and the receiver or

the transmitter.

Step6. Connect with DC24V power adaptor(s) One is enough if Transmitter or

Receiver is connected with adapter as its PoH function).

SYSTEM CONNECTION

Input & Output

Input

(1) IR; (1) HDBaseT; (1) RS232

Input Connector

(1) 3.5mm mini jack; (1) RJ-45;

(1) 3-pin pluggable terminal block

Audio

Digital audio, transmit through HDMI audio

Output

(1) HDMI; (1) IR; (1) RS232

Output Connector

(1) Female HDMI; (1) 3.5mm mini jack;

(1) 3-pin pluggable terminal block

General

Resolution Range

640x480@60Hz~4K@60Hz 4:2:0

Transmission Mode

HDBaseT

Transmission Distance

1080p ≤ 70m; 4Kx2K ≤ 40m

Bandwidth

10.2Gbps

HDMI Standard

Support HDMI1.4 and HDCP2.2

Operation Temperature

0 ~ +40℃

Storage Temperature

-10 ~ +55℃

Relative Humidity

10% ~ 90%

Power Supply

Input: 100VAC~240VAC, 50/60Hz;

Output: DC 24V, 1.25A

Max Power Consumption

14W

Dimension (W*H*D)

115mmx16.2mm x109mm

Net Weight

196g

SPECIFICATION

HDCPLINK

RS232 IR IN IR OUT HDMI OUT HDBT IN DC 24V

RXTX

115 mm

109 mm

16.2 mm

PANEL DRAWING

No image on display:

Ensure that the display device has been set to the correct input.

Ensure that the HDMI cables used for both the source/transmitter and the

receiver/display are properly connected and are working. Test the HDMI cables

directly from a source to display and ensure their operation.

Ensure that the CAT5e/CAT6a cable has not been damaged and that it has

been terminated correctly with T568B on both ends. A temporary length of

CAT5e/Cat6 can be used for testing to ensure that the devices are all

compatible and working properly.

Ensure proper grounding of the power supply.

Known issues with HDMI 1.2 source devices:

Older compatibility (HDMI 1.2) may result in HDBaseT transmission issues.

Please contact Technical Support of your director for a solution to these issues.

Color lose or poor picture quality:

Ensure that the HDMI cables used for both the source and transmitter and the

receiver and display are properly connected and are of good quality. Test the

HDMI cables directly from a source to display and ensure their picture quality.

Ensure proper grounding of the power supply.

If the static becomes stronger or picture quality becomes worse when

connecting the video connectors, this may be due to improper grounding.

Check the grounding and make sure all the components are properly grounded

to a common ground. Improper grounding may cause damage to the receiver.

If your problem still remaining after following the above troubleshooting steps,

please find further assistance.

TROUBLESHOOTING & MAINTENANCE

Indice

Altri manuali J-Tech Digital Estensione

J-Tech Digital

J-Tech Digital JTD-611V3 Manuale utente

J-Tech Digital

J-Tech Digital JTD-2860 Manuale utente

J-Tech Digital

J-Tech Digital JTECH-WEX-22 Manuale utente

J-Tech Digital

J-Tech Digital JTECH-EXBT460 Manuale utente

J-Tech Digital

J-Tech Digital JTD-1263 Manuale utente

J-Tech Digital

J-Tech Digital JTD-2994 Manuale utente

J-Tech Digital

J-Tech Digital ARC-HDEX40ARC Manuale utente

J-Tech Digital

J-Tech Digital JTD-1729 Manuale utente

J-Tech Digital

J-Tech Digital JTECH-VW-4KPR Manuale utente

J-Tech Digital

J-Tech Digital JTECH-BE100 Manuale utente

J-Tech Digital

J-Tech Digital UHDT150 Manuale utente

J-Tech Digital

J-Tech Digital JTD-229 Manuale utente

J-Tech Digital

J-Tech Digital JTD-2865 Manuale utente

J-Tech Digital

J-Tech Digital JTD-3023 Manuale utente

J-Tech Digital

J-Tech Digital JTECH-4K88-EX2 Manuale utente

J-Tech Digital

J-Tech Digital JTD-2987 Manuale utente

J-Tech Digital

J-Tech Digital JTD-190 Manuale utente

J-Tech Digital

J-Tech Digital JTECH-VW09 Manuale utente

J-Tech Digital

J-Tech Digital JTECH-ex2 Manuale utente

J-Tech Digital

J-Tech Digital JTECH-AET1000B Manuale utente

J-Tech Digital

J-Tech Digital JTECH-EX230 Manuale utente

J-Tech Digital

J-Tech Digital JTD-416 Manuale utente

J-Tech Digital

J-Tech Digital JTD-185 Manuale utente

J-Tech Digital

J-Tech Digital JTDHDEX-1 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente