Jadever JKD 250 Manuale utente
JADEVER SCALE CO., LTD
JDI SCALE
1
User’s Manual JD
1. Keypad
ZERO key: Sets the display to zero. (Zero range is within 2% of
maximum
capacity. Initial zero point range is within 20% of maximum capacity)
I
TARE key:Tares the weight on the scale platform.（
Tare range is over 20d but
less than maximum capacity）
GROSS/NET key:Toggles between gross and net weight.
Sleep/Wake key:Toggles between standby mode and working mode.
I/O key: Power on or off the scale
Note:
◎G.W. =Gross weight
◎N.T. Net weight = gross weight minus tare.
◎JDI-800 can only use the OUTPUT DC 6V /2.5A adaptor. Battery is optional.
◎Please check the power source if there is sudden power failure.
2. Weighing Menu
M+: Adds the indicated weight into Accumulation memory.
Note:
◎Only if the weight is over 20d, can it be accumulated.
◎R
emove the item and the display goes back to zero before the next
accumulation can register.
PRINT: Outputs data.
print modes: manual print /Stable print
Note: Turn off the printer before connect to the scale.
MC: clears previous accumulation data.
Return:Returns to previous menu.
3. COUNT Menu
MR: Adds the indicated weight and
piece count value into Accumulation
memory.
UW Lookup: Recalls unit weight from memory.
Note: I
f there is no weight value or unit weight value, the UW Lookup is not
available.
Store UW: Stores Unit weight into memory.
JADEVER SCALE CO., LTD
JDI SCALE
2
Clear Count: Clears counting results.
MC: Deletes accumulation records.
M+: Adds the displayed quantity /weight into the accumulating memory.
SAMPLE: Inputs the indicated sample size to calculate average unit weight.
UW: Inputs the indicated unit weight value to calculate the amount of load.
PRINT:Outputs data.
Note: Under the counting mode, only if there is a quantity value
and the stable
indication appears, can it be printed out.
Return Returns to previous menu.
4. SETUP Menu
4.1 NETWORK Sets the network connection.
1) Cable net: Selects cable network as the current network connection.
2) Wifi Conn:Selects Wifi network as the current network connection.
Note:
Auto Update:
If connected to internet, the
system will be updated to the newest version when
the power turns from off to on.
4.2 Set Label Press to initiate label setting.
Label content
%DATE% Date
%TIME% Time
%WEIGHT% Total Weight
%GW% Gross Weight
%NW% Net Weight
%UNIT% Unit Weight
%COUNT% Count
%ACCWEIGHT % Total Accumulation data( total weight)
%ACCCOUNT% TotalAccumulation data( total weight)
%S/N% Serial Number
%TARE% Tare
%TRADENAME % Goods Name (After connected to sto
ck control
system and the material is selected, this content can be printed out )
Barcode category :
CODE39, CODE93, CODE128, UPCA, UPCE, EAN8,
EAN13
Note:
◎
The date and time on the label is based on the scale time setting.
JADEVER SCALE CO., LTD
JDI SCALE
3
◎only 1-D bar code is supported.
4.3 System Set Press to initiate system setup
1) Auto-Off: Sets the period of inactivity before the scale automatically turns
off.
2) Sound: The scale has been installed button sound and weighi
ng speaker.
Please connect to audio device, if you wish to use this function.
3) Manual Update:
Use the U disk to copy the new program, then insert the U
disk to the USB port which has the marking of “dev”. The system can be
updated by simply pressing Manual Update button.
4) Theme: Press to select your favor theme: blue style or default.
5) Language: Simplified Chinese/Traditional Chinese/English/Spanish
6) TIME: Set time
7) AutoSleep: Sets the period of inactivity
before the scale automatically turns
to standby mode.
Note: The way to wake up the scale
◎Press key Sleep/Wake
◎Click the screen
◎Under weighing mode, click the weighing pan or the screen
4.4 CAL – Calibration
：
For best results calibrate the scale at regular
intervals. This is especially important if the scale is in use for prolonged
periods.
Calibration method I
Arbitrary value: After the zero point calibration finished, input any
calibration value to continue the calibration procedure.
Calibration method II
Cal Setup: Input the calibration points. It will automatically work out each
calibration point value
Multi-point: After setup the calibration point, conduct the calibration
procedure.
Note: When the unit is “Ton”, the capacity and calibration value are set by
unit “kg”
4.5 Set Weight
1) Weight CK-- Check weighing:
Use this mode to compare the weight of an
item to Lower and Upper limits.
High The weight on the weighing pan is greater than the upper limit
OK The weight on the weighing pan is between upper and lower limits.
Low The weight on the weighing pan is smaller than lower limit.
JADEVER SCALE CO., LTD
JDI SCALE
4
Beep up= There will be a warning sound when the weight/ quantity of articles
exceed the upper limit.
Beep in = There will be a warning sound when the weight/ quantity of articles is
between the upper
Beep low= There will be a warning sound when the material weight/quantity is
less than the lower limit
2) SerialSet—Set serial number
3) Accuracy: Press to initiate accuracy and maximum capacity of the main
scale and remote platform.
Main scale: JDI scale
Remote platform: floor scale or platform scale
Note:
◎Resolution 600-300000
◎JDI-800 indicator can connect two scales simultaneously
4) QTY CK-- Quantity Checking:Use this mode to compare the quantity of
weighing item to Lower and Upper limits.
5) UnitsSet:Sets Unit of measure
Note: Under the weighing mode, press and hold GROSS/NET key to enter
unit setting directly.
6) Zero Range: Sets the range in which the Zero indication turns on. Options
are D0 (1 division), D1 (2divisions), D2 (3divisions), D3 (4 divisions), D4
(5divisions) and D5 (6divisions).
7) Auto Tare: Deducts the value of the container when it’s within the pre-set
values.
8) ACC Set --- Accumulation setting:Sets the maximum accumulation
items and accumulation method.
Stable ACC=Automatically accumulates stable weighing.
Weight OK ACC=Automatically accumula
tes weighing which are between
upper and lower limits.
Count OK ACC=
Automatically accumulates quantity of the material which is
between the upper and lower limit.
Manual ACC=Manual accumulation, press to accumulate weighing.
9) FilterSet: Sets filter level. The higher setting and the better shockproof.
10) Commport: Choose the communication port
11) CommMode: Choose the communication mode to Jadever weighing
software
5. STOCK Menu
After connecting to network, you could use this function for stock control.
JADEVER SCALE CO., LTD
JDI SCALE
5
◎The stock function is available only after stable indication appears
and there
should be a weight or quantity value.
◎Remove
the item and the display goes back to zero before the next stock
action can register.
◎If the being used unit is weighing unit, the stock acts in weighing mode. I
f the
being used unit is counting unit, the stock acts in counting mode.
6 Initialization
If there is system failure after update, please initial the parameter.
Press and hold key ZERO while powering on the scale. Do
not release it unless
there is a beep sound which means the initialization is finished.
Note: All the setting parameters including accuracy, capacity and calibration are
cleared after initialization.
7 Screen Calibration
Under the main screen, press and hold Sleep/Wake key while pressing down
ZERO key to start screen calibration. During the calibration, press Sleep/Wake
key to wake up the device if it enters the standby mode.
Appendix
Barcode category instruction
Code39:a barcode symbology that can en
code uppercase letters (Athrough Z), digits (0
through 9) and 8
special characters. Possibly the most serious drawback of Code 39 is its low
data density: It requires more space to encode data.
This means that very small goods cannot
be labeled with a Code 39 based barcode. However, Code 39 is still widely used and can be
decoded with virtually any barcode reader. One advantage of Code 39 is that since there is no
need to generate a check digit, it can easily be integrated into existing printing system by
adding a barcode font to the system or printer and then printing the raw data in that font.
Code93: a barcode symbology designed in 1982 by Intermec to provide a higher density
and data security enhancement to Code 39. It is an alphanumeric, variable lengt
h symbology.
Code 93 is used primarily by Canada Post to encode supplementary delivery information.
Every symbol includes two check characters.
Code128: a very high-density barcode symbology. (A special version of it called GS1-
128
is used extensively worldwide
in shipping and packaging industries.) It is used for
alphanumeric or numeric-
only barcodes. It can encode all 128 characters of ASCII and, by
use of an extension character (FNC4), the Latin-1 characters defined in ISO/IEC 8859-
1.
GS1-128 (formerly known as UCC/EAN-
128), not Code 128, is the major component of the
JADEVER SCALE CO., LTD
JDI SCALE
6
labeling standard for GS1 used as product identification for container and pallet levels in the
supply chain.
•128A (Code Set A) - ASCII characters 00 to 95 (0-9, A-
Z and control codes), special
characters, and FNC 1-4
•128B (Code Set B) - ASCII characters 32 to 127 (0-9, A-Z, a-
z), special characters,
and FNC 1-4
•128C (Code Set C) - 00-99 (encodes each two digits with one code) and FNC1
Universal Product Code (UPC): a barcode symbology, which is widely used in
Canada and the United States for tracking trade items in stores.The UPC has only numerals
,
with no letters or other characters.
UPC in its most common usage technically refers to
UPC-A which encodes 12 decimal digits. UPC-E only uses a 6-
digit code, does not use
middle guard bars on smaller packages.
EAN-13:Four components :
•The GS1 Prefix, the first two or three digits, usually identifying the national GS1
Member Organization to which the manufacturer is registered (not necessarily where
the product is actually made).
•The Company number, consisting of four, five or six digits
•The Item reference, consisting of two to six digits
•Check digit, a single checksum digit
EAN-8:It was introduced for use on small packages where an EAN-13 barcode would be
too large. It begins with a 2 or 3 digit GS1 prefix (which is assigned to each national GS1
authority) 5 or 4-
digit item reference element depending on the length of the GS1 prefix), and
a checksum digit.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Jadever Scala
Jadever
Jadever JCN Manuale utente
Jadever
Jadever JWE Manuale utente
Jadever
Jadever LGCN-3075 Manuale utente
Jadever
Jadever JWI-501 Series Manuale utente
Jadever
Jadever JWE Manuale utente
Jadever
Jadever Jadever SKY Manuale utente
Jadever
Jadever IDS701-CTRUCK Manuale utente
Jadever
Jadever JCL Series Manuale utente
Jadever
Jadever JWI 700C Manuale utente
Jadever
Jadever JWE-3K Manuale utente
Jadever
Jadever JWE Manuale utente
Jadever
Jadever LPWN-1530 Manuale utente
Jadever
Jadever JC Manuale utente
Jadever
Jadever JKH Manuale utente
Jadever
Jadever JWI-700W Manuale utente
Jadever
Jadever JCL Manuale utente
Jadever
Jadever NWTE Manuale utente
Jadever
Jadever JCL Series Manuale utente
Jadever
Jadever JWA series Manuale utente
Jadever
Jadever JCAII Manuale utente
