Janam XG series Manuale utente

XG Series

Quick Start Guide™

040212XGcom.7

Purpose-Built Technology.®

Janam XG Series Quick Start Guide

XG Series Quick Start Guide

XG Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names

may be trademarks or registered trademarks of their respective owners.

Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide. Janam

Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through the use of

this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by deletion of data as

a result of malfunction, dead battery or repairs. To protect against data loss, be sure to make backup copies (on other

media) of all important data.

Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact

Janam. For a copy of the Product User Guide, visit the Resource Center at www.janam.com

Important: Please read the End User License Agreement for this product before using the device or the

accompanying software program(s). Using the device or any part of the software indicates that you accept the terms

of the End User License Agreement.

Janam XG Series Quick Start Guide

To help you get started with your XG Series mobile computer, this guide features:

-Hardware Overview

-Getting Started

-Regulatory Information

For additional product details, visit www.janam.com.

For software updates and information, visit www.microsoft.com.

Content and Additional Resources

Janam XG Series Quick Start Guide

Hardware Overview

1. Power

2. Right Function Key

3. Microphone

4. Front Indicator LED Lights

5. LCD Screen

6. Navigation Keys

7. Left Function Key

8. Escape/Clear Key

9. Indicator LED Light

10. Syncing/Charging Connector

11. Space Key

12. Green Control Shift Key

13. Enter Key

14. Blue Function Shift Key

15. Backspace Key

16. Orange Function Shift Key

17. Indicator LED Light

Please Note: There are several keypad congurations.

For other keypad layouts, please visit www.janam.com

Janam XG Series Quick Start Guide

Hardware Overview

1. Scan Window

2. Scan Trigger Button

3. Handle/Battery Chamber

4a. Base of Battery

4b. Battery Release Plunger

5. Lanyard Connector

6. Speaker

7. Memory Card Door

8. Memory Card Door Screws

9. Rear Indicator Lights (Tail Lights)

10. Syncing/Charging Connector

Janam XG Series Quick Start Guide

Getting Started

A. INSTALLING THE BATTERY

1. Insert the top of battery into chamber opening and gently slide battery into battery chamber (Figure 1).

Do not force past point of resistance.

2. Turn the battery so that the base of the battery is perpendicular to the device handle (Figure 2).

This aligns the battery notches with the battery chamber which is required to insert the battery.

3. Once the battery is properly aligned with the handle, press the battery into the battery chamber.

4. Rotate the battery base clockwise until the base of the battery is parallel with the device. The battery release plunger

will click and lock the battery into place (Figure 3).

B. REMOVING THE BATTERY

1. To remove the battery, fully press the battery release plunger and hold while rotating the battery counter-clockwise until

it stops (battery base will be perpendicular to device handle).

2. Grip the battery base and pull battery from battery chamber.

BATTERY

Figure 1

Perpendicular

Figure 2 Battery

Release

Plunger

Parallel

Figure 3

Base of

Battery

Janam XG Series Quick Start Guide

Getting Started

C. CHARGING THE BATTERY

Important Note: The backup battery, which allows the main battery to be hot-swappable, must charge at a low current.

Initial charge-time for the backup battery, therefore, is 72 hours. This initial charge-time is required prior to rst use or

after a full drain of the backup battery. Please see the Product User Guide for additional details.

To charge the battery using the USB Cable or Serial Cable:

1. Connect the power supply to the USB or serial cable.

2. Connect snap-on end of USB or serial cable to syncing/charging connector at the bottom of device (Hardware

Overview #10) making sure the JANAM logo on the connector faces front.

3. Insert appropriate AC adapter and plug in the power supply. Use only easily accessible wall outlets that are

easily reached with the length of supplied power cable.

To charge the battery using the Single-Slot or Four-Slot Cradle:

1. Connect the power supply to the cradle.

2. Connect the line cord to the power supply.

3. Insert appropriate AC adapter and plug in the power supply. Use only easily accessible wall outlets that are

easily reached with the length of supplied power cable.

4. Place the device in cradle. The LED will illuminate to conrm connection (orange indicates charging, green

indicates fully charged and red indicates fault).

5. The battery is fully charged in approximately 5 hours.

6. For Single-Slot cradle only: Charge a spare battery by placing the battery in the spare battery well with

connectors lined up. An LED will illuminate to conrm connection.

Janam XG Series Quick Start Guide

D. CALIBRATING THE SCREEN

The rst time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen

instructions using the stylus to tap the exact center of each target.

Note: If your XG Series device came pre-loaded with a custom software application, the Welcome Utility may not appear.

E. LCD BACKLIGHT ADJUSTMENT

To adjust LCD backlight, tap the following sequence: Start > Settings > Control Panel > Display > Backlight > Advanced,

then adjust on-screen slider with stylus or use the navigation arrow keys.

Getting Started

Janam XG Series Quick Start Guide 8

Regulatory Information

Regulatory reference number: Model numbers XG100, XG105

All devices are designed to comply with local rules and regulations to the countries they are shipped. Any

changes or modications made to Janam products without Janam’s approval could void the user’s authority

to operate the equipment. Only use Janam approved or recommended batteries and accessories. Use of

alternative batteries or accessories will invalidate approval given to the device and may be dangerous.

Laser Caution Label

The laser caution label appears on the back of the product as shown below.

Power Supply

Use only Janam approved power supply model number EA10302.

Janam XG Series Quick Start Guide 9

RF Exposure Guidelines

This device was tested for typical body-worn operations. To maintain compliance with FCC and Canada RF exposure

compliance requirements, use only Janam approved hand strap and accessories for this product.

To comply with FCC RF exposure compliance requirements, the following antenna installation and device congurations

must be satised:

1) Users are not permitted to make changes to or modify the system in any way, and

2) Connecting external antenna to the card is prohibited. This device and antenna must not be co-located or operated

with any other antenna or transmitter.

Radio Frequency Interference Requirements

United States

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

For further information contact:

Janam Technologies LLC

100 Crossways Park West, Suite 105

Woodbury, NY 11797 USA

Any changes or modications made to this device that are not expressly approved by Janam may void the user’s authority

to operate the equipment.

Indice

Altri manuali Janam Lettore di codici a barre

Janam

Janam XG105 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente