Javes TLX-928 Manuale utente
TLX-928
User Manual
China Projectors Group Room 207, 2/F., Block B, Seaview Estate, Watson Road, North Point, Hong Kong.
Telephone: (852) 28875151 Fax: (852) 25031144 E-mail: [email protected] Website: http://www.chinaprojectors.com
Portable DLP projector
1
JAVES LCD PROJECTOR
BEFORE USE
Please read this manual carefully before operating the projector and keep
it properly.
Warning
Do not attempt to repair or adjust this equipment except professional worker, and keep the seal
intact, otherwise the service promise invalidation.
Do not use the projector in damp, high temperature, shaking, continually moving places. Oper-
ating temperature is between 5¡ãC to 35¡ãC, and only use it on a level and stable surface,
avoid falling down and hitting acutely.
Only use the projector in dark environment to make sure the imaging effect. The projection
screen should avoid direct irradiation of strong lights.
Do not look directly onto the lens when the projector is in use. Eye damage may occur!
Do not look at laser beam on remote device directly as it may cause eye damage, and do not
make others look it directly.
Keep the fans running before turn off the power to cool the projector.
Do not turn on and off the projector continually, the interval should be longer than 5 minutes.
When instead the bulb, please follow the direction of this manual and cool the projector without
fail.
Do not clog the opening (absorption tube/exhaust pipe) of the projector when use the projector,
otherwise it makes internal temperature increase and impact using term.
Please comply the following items to protract the using term.
Correct using methods
Turn off the power before cleaning the projector
Please use soft cleanser and cloth to clean the shell
Please draw the power line from the electrical outlet, if do not use the projector for a long
Wrong using methods
Clog the exhaust vent.
Use abrasive or cere to clean the projector.
Put the projector in the following places:
place where the temperature too high or low, damp place
place easy to bring dust
place have strong electromagnetic flied
z
z
z
z
z
z
z
z
z
z
JAVES LCD PROJECTOR
2
Product Introduction
Special functions
This projector has the following characteristics:
This product is named front projector, and mainly used in education, commerce and family amuse-
ment. It has high brightness, high contrast, good color revert ability small volume and low noise. It
is also has many special functions, including horizontal plumb keystone correction, parcel mag-
nify, PIP Enable manifold I/O interfaces, manifold language OSD, front and back remote control. It
is the ideal export equipment to computer, DVD player, game player and so on. The image of this
projector can right-and-left or plumb reverse, and the ASPECT RATIO can transition between 4:3
and 16:9.
Appearance of the product
BODY
Control Panel
ControlPanel
Focus Ring
Zoom Ring
Lens Cover
Infrad Receiver
Fan
Power Lamp
Menu Button
Power Button
Select Button
Input Button
Alarm Lamp
3
JAVES LCD PROJECTOR
Remote Control with Laser Pointer
Main Function of Remote Control
A: Laser button: Press down the button, the remote control will
shoot a beam of red laser
B: Power Button
C: Keystone: Press the button, adjusting menu.
D: Menu button: Press it once, the key menu displays, press it
again, the menu hides.
E: Up-down button: Use the two buttons to move cursor to
increase or decrease the numerical value of the chosen item.
F: Right-left butoon: Use the two buttons to move cursor to
increase or decrease the numerical value of the chosen item.
G: Brightness Button
H: Contrast Button
I: Language button for select menu
J: Mute menu
K: Zoom Button for magnifies or reduces the part of image
L: Input Button for signal input.
M, N, O, P, Q: Signal input solely
R: PIP Enable
S: Freeze Button: Press once to keep the current image on
screen, press it again, the image renew.
T: Auto Button: Press the button to automatically adjust com-
puter images to their optimum condition.
Changing the battery of Remote Control
1. Notices about using dry battery
Please use dry battery correctly, broken or liquid leak of battery may cause fire, damnification
and pollution of environment.
Please put the battery in place where children and pets can not touch.
Please use the appointed batteries (No.7 battery).
When put battery into remote control, please pay attention to the direction of the polarity sign
anode (+) and cathode(-), and astall it follow the sign on remote control.
When abandon the battery, please obey the native laws in point.
2. How to load and unload the dry battery
a. Take down the battery cover: unplug the
bolt of cover, and take down it follow the
arrow points.
JAVES LCD PROJECTOR
4
b. Encase the dry battery: encase the
No. 7 battery follow the sign + and -.
c.Closebatterycover: Pressdown the
battery cover follow the arrow
andreplace.
3. Operating Methods of Remote Control
z Make sure you are within 5meters of the projector, and within range of the infrared
receivers(approximately 30’ to left or right).
z Remote control sent signals by infrared. In the condition that there are barriers between
remote control and sensor, the signals can not carry to the projector, so please use projector in
room without barriers.
Within 30 Degrees
Within 30 Degrees
About 5 meters
5
JAVES LCD PROJECTOR
Connecting to Additional Equipment
ATTANTION: Wrong connecting way may cause fire, electric shock and damage.
Items should obey:
zWhen you connect additional equipment to projector, please read certain equipment’ s operat-
ing manual carefully.
z Before beginning, turn off the projector and computer if they are on. If connect in electrify
condition, it may cause huge noise and malfunction
zWrong connection of input and output ports may cause malfunction, so pay attention when you
connect additional equipment to projector.
z Make sure tighten the screws to fix up, when use VGA, DVI connector.
1. Connecting to a computer
When connect with notebook PC, make sure set notebook in RGB exterior images output effec-
tive( set LCD and CRT display together or CRT display).You can read the computer operating
manual to search the details.
Monitor
Desktop Computer
Notebook Computer
DVD Player
Video Recorder
AudioCable
AudioInputPort AudioOutputPort
VideoCable
VideoOutputPort
AudioCable
AudioInputPort AudioOutputPort
VideoCable
VideoInputPort
VideoInputPort VideoOutputPort
JAVES LCD PROJECTOR
6
2. Connect to a DVD player
PS: After the system is steady, you should put MUTE utton on remote control, then the attached
voice will output.
3. Connect to a video recorder
PS: After the system is steady, you should pu the MUTE button on remote control, then the
attached voice will output.
ComponentCable
CompositeCable
CompositeCable
S-VideoCable
Video Recorder
7
JAVES LCD PROJECTOR
4. Connect to a desktop machine
a. Communicate condition
Make sure the computer serial port set conformably with
the cable serieal port
Signal format: measure up RS-232
VGA cable
VGA port
output
Monitor
VGA port
input
Baud rate: 9,600bps
Data length: 8 bits
Parity check: none
Stop bit: 1 bit
Flow control: none
b. Basic format:
Send the injunction from computer according to the fol-
lowing order: head, data and end.
INJUBCATION FORMAT (HEX)
Setting up the projector
Adjust the height of your image
If the image or screen incline, please adjust the height button. You can adjust the angle between
0 Dgree and 15 Degree.
1. Press the HEIGHT button
VGACable
Monitor
JAVES LCD PROJECTOR
8
2. Lift up the projector to adjust the
height, then loosen the height button.
After loosening the button, the height
of image will be fixed.
3. Revolve the focus ring to inching.
Repositioning the Image
1. Use remote control to operate
Keystone Button
9
JAVES LCD PROJECTOR
Press Keystone button, you will see the horizontal and vertical trapezium emendation menu.
Use up and down buttons to move cursor, and press right and left buttons to reinstall the emenda-
tion parameter. After setting up parameter, press SELECT button to save the setting.
2. Enter OSD menu to operate
Press MENU button to enter OSD menu, then press button 5 times or press DOWN button once
to enter keystone correction menu.
Press SELECT button o RIGHT button, the following horizontal and vertical keystone correction
menu will turn up.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Javes Proiettore
Javes
Javes BTS-M420 Manuale utente
Javes
Javes NSK-1080P Manuale utente
Javes
Javes XPL-520 Manuale utente
Javes
Javes HLT-102 Manuale utente
Javes
Javes HLT-102 Manuale utente
Javes
Javes HDX-520 Manuale utente
Javes
Javes JCD-720P Manuale utente
Javes
Javes JAVES SLC-515SA Manuale utente
Javes
Javes PMP-N70 Manuale utente
Javes
Javes OLX-730 Manuale utente
