Jaycar AR1727 Manuale utente
User Manual
CH
CH
TV
DATE
VCR DVB DVD
CD T A PE
TUNER
AUX
VOLVOL
DEVICE LEARN SET
MACRO
T OUCH SCREEN
PA GE1
5
7
+10
0
ANT/CA TV TV/VIDEO
ZOOM
SW AP
PIP
FREEZE
3
AM
ENTER
12
64
89
MTS
JUMP
TIME/DISP
Learning Remote Control
Introduction
Device Code Assignment
Key Functions
Battery Installation
Device Edit
Adding a device
Deleting a device
Device Set-up
Direct Set-Up by Brand and Code
Set-Up by Auto Search
Set-Up by Enter code
Learning
Learning a Command
Deleting learnt a key
Deleting all learnt Command for a device
Deleting learnt all
Changing T ouch Screen Layout
Macro Function
Setting up Macro
Operating the Macro
Deleting Macro
Other Set-up
A. Clock Set-up
B. Volume Lock
C. Device Lock
D. Back light
E. Contrast Adjust
F. LCD Delay
G. Beep
H. Clear All
1
1
3
5
5
5
6
6
7
8
9
10
11
12
13
14
14
15
15
16
16
17
17
18
19
20
21
21
22
23
Contents
1
Thank you for your purchasing Learning Digital Touch Screen Universal Remote
Control. You have selected a new designed
Digital Touch Screen Universal Remote
technology. Based on our creative design, it has the
way to set up directly by the brand name and code no. on its
LCD screen even if without the manual book later.
This digital touch screen universal remote control can work with almost all brands of
Televisions (TV), DVD-players and DVR-players (DVD), DVB receivers and (digital)
(DVB), Video Recorders (VCR), Tuner receivers
Device lock can fix the device against changing by a new set up until you unlock it.
Introduction
Control with latest concept and
easiest and fastest
Satellite receivers and Cable box
receivers (TAPE), CD-players (CD), Audio amplifiers and LD(TUNER), Tape.
and other Audio (AUX). You can control 8 devices and add 8 new devices.players
You can use Auto Search to scan the code library in case that you can not find
your device brand in the code list.
And it also can learn a new code from an original remote control to supplement the
codes in case of its shortage.
The touch screen universal remote control can operate all main functions of your
TV TEXT and Menu
function of your TV as your
selected devices. It supports
original remote control.
Macro function makes several sequent operations with one button for your home
.
theater
Volume lock can fix VOL+/VOL- button to control Amplifier only for your home
.
theater
2
All the set up data will be stored in back up memory permanently, you don'
This remote has also real time clock to show you week , date,time and AM or PM .
And It will show you when batteries become low.
Please enjoy the time with this new intelligent touch screen universal
remote control.
Device Code Assignment
Total codes: 1839
.
need
to worry about data loss when you replace battery
3
Key Functions
SET
Starting to set up (program) the remote control or
show you the status of the LCD screen.
LEARN
Setting up learning functions.
MACRO
Sequent operation for your home theater.
DEVICE
Making devices TV and TV1(VCR and VCR1,....)
PA GE
Switching between Page1 and Page2 of touch
screen buttons.If you hold down for 3 seconds,
you will see the date and year on LCD screen.
LIGHT
Controling the touch screen back light.
POWER
Turning the device on and off. Press the power
button to show all available LCD choice for all
buttons under LCD layout mode.
TV ,VCR,DVB,DVD,CD,T APE,TUNER,AUX
Selecting the device which you want to control.
CH
Working like the Channel Up and Down key on
your original remote control.
VOL and MUTE
Controling the volume, like the Volume Up and
Down and Mute key on your original remote
control.
0-9
The number keys operate the same function as
on your original remote
control.
4
ENTER
Using after direct channel number entry to immediately change the
selected channel.
MENU
Works like the Menu (to adjust some features of your device) or OSD
(on-screen display) or Memory key on your original remote control.
REW Fast Reverse
PLAY (Operate your DVD or CD)
FFWD (Fast Forward)
REC (Record)
STOP (Terminate your operation)
PAUSE
(Terminate the operation for a moment and standby)
OK .EXIT Works like the UP .DOWN .LEFT ,
RIGHT .OK .EXIT Keys on your original remote control for
menu function. But during set up mode, they are used for
cursor, confirm and exit to program your remote control only.
Television video
TV and text mixed
Teletext mode
Page hold
R,G,Y , and BRed Green Yellow and Blue for TV Fast Text.
Note:
Before your setting up any functions, you must activate this Remote on
This remote control needs 4 batteries to work with, please refer to the direction
Alkaline batteries are recommended since the larger LCD screen consumes
first by touching the screen or pressing any key onthe remote control.
marks inside the battery compartment and put four AAA batteries inside.
more power than the common universal remote control.
Battery Installation
Adding a Device
If you want to operate the second TV (or second VCR, DVB, DVD, CD,
TAPE, TUNER etc.), you can add a new device. Please just operate the steps as
following:
1. Press the SET key on your remote control for more than 3 seconds, then
release it.
2. Press the or keys to select to Device on LCD menu, and press OK key.
3. Press the or keys to select to Add New on the LCD menu, and press the OK
key, the LCD shows SelectDEV, then please press device key to select your
desired adding device (e.g. TV or DVD ...). If you add more than 8 new devices,
the LCD will shows Full.
5
Battery
full
Battery half
full
Battery
low
Battery Installation
Device Edit
To install the batteries:
1. Turn the remote over, pull up on the tap and lift the cover off.
2. Insert the batteries matching the batteries to the (+) and (-) marks
inside the
3. Slide the battery cover back into the place.
Note:
Whenever the batteries need replacement, the LCD remote will indicate with
battery low message. Please replace them with new batteries now. All settings
you have programmed into the new remote control will be stored in memory
even if you take out the batteries (but you may need to reset the clock).
4. Press OK key to save it and LCD shows Success!.
5. If you add other devices, please repeat steps 3~5. You can press device
key(e.g. TV) again to finish SET UP or use or to select other set-up.
battery case.
Deleting a Device
2. Press the or keys to select Device on LCD menu, and press OK key.
3. Press the or keys to select Delete on the LCD menu, and press the OK key
select your desired delete device(e.g. TV,DVD... ). If no new added device, LCD
4. Press the OK key to save it and LCD shows Success!
5. If you delete other devices, please repeat steps 3~4. You can press
device key (e.g. TV) again to finish SET UP or use or to select other
set up.
6
TV 048
SUN 11:59 AM
Device
SetupCode
Success!
Add New
Delete
Select DEV
TV1
Add New
Delete
Select DEV
SET 3S OK OK
TV OK 1S
TV 048
SUN 11:59AM
Device
SetupCode
DeleteDEV
TV1
DeleteDEV
Add New
Delete
SET 3S OK
OKTVOK
Add New
Delete
OR
Success! Add New
Delete
1S
1. Press the SET key on your remote control for more than 3 seconds,
then release
it.
, then you press device key toLCD shows DeleteDEV
shows EMPT.
7
Direct Set-Up (by Brand and Code)
If you know the device's brand name, you can set up by Direct Set-up
(search on screen by brand name directly and choose the code).
1. Turn on the device (e.g. TV, DVD...) that you would like to operate. If it is a
VCR, Please insert a tape.
2. Press and hold the SET key on your remote control. Then press
(simultaneously) one of the device keys (e.g. TV, DVD...).
3. Then release them, the Brand will be displayed on the screen.
4. You can press the or key to select the brand of your device (e.g.
your TV brand: Life).
5. Check the function of the keys (e.g. POWER CH+ CH- VOL+ VOL-
MUTE). If none of the keys of your new remote control can work, or
most of the keys work improperly, please try another code by the or
key, until all basic functions operate properly
6. If you are satisfied with the code, please just press the OK key to save
it. LCD shows Success!, then it finishes the set-up. You can press
device key (e.g. TV) again to finish SET UP or use or to select other
set-up.
TV 048
SUN 11:59 AM
Accent
023
TV 169
SUN 11:59 AM
Success!
Life
003
Life
169
SET+TV
OK 1S
OROR
Device Setup
8
Note:
1. To return to beginning status, please press the EXIT key or the device
key (e.g. TV, or VCR...)
2. You must point your remote control to the device what you wanted to
control when you test the keys.
3. The keys of OK, EXIT are only used to set-up your new remote
control You can't control your device as normal menu function at this moment
4. If the device is locked, you must first unlock the device then setting up.
Set-up by Auto Search
If the set-up by brand and code failed or you cannot find the brand
name in your remote control screen, you may use the Auto Search to
find the correct code to operate your device.
1. Turn on the device (e.g. TV, DVD...) you would like to operate. If it is a
VCR, Please insert a tape.
2. Press the SET key on your new remote control for more than 3 seconds,
then release it.
3. Press the or keys to select to SetupCode on LCD menu, and press
OK key.
4. Press the or keys to select to Auto Srch on the LCD menu, and press
the OK key, then you press device key to select your desired operation
device(e.g. DVD) and then press the OK key to start the Auto Search.
(You must point your remote control to your device at this moment).
5. See if the device reacts or not, once the device reacts,please press
any key to stop the search.
6. Test if most of keys work well or not. If most of keys work not very
well, please press the or keys to select other code.
7. If you find one satisfied code ,please press the OK key to save it and
LCD shows Success!. You can press device key (e.g. TV) again to finish
SET UP or use or to select other set up.
until you quit from set up.
Indice
Altri manuali Jaycar Telecomando
