Jetcom CCTV SS-HDR-82 Manuale utente
pre-record H.264 HDMIVGA
In order to ensure your rights and interests, please read this manual carefully before you install
and use the DVR.
Use the appropriate adapter for the DVR.
To protect the main chip from thunder striking, please make sure the groundwire is correctly
connected before using the DVR.
Do not expose the DVR to rain or use it under high humidity circumstance.
This DVR cannot be installed at the places with much dust, and avoid potential mechanical
vibration or impact.
Install this DVR under good air circulation conditions. Do not place it near the heater or under
direct sunlight.
Please choose high quality hard disk (HDD), which could meet the working demand of the DVR.
For its quality, please purchase hard disk from regular merchants, and do not use the Western
Digital hard disk.
CAUTIONS
Network Digital Video Recorder Operation Manual (V1.0 )
Before connecting to other facilities, pleasedisconnect the power supply and pull thepower line
plug out from the power socket.
In case of any solid or liquid coming into the case, please disconnect the power supply
immediately, and the DVR can be restarted only after being checked by qualified servicemen.
If the DVR is not in use for a long period of time, please disconnect the power supply and pull
the power line plug out from the power socket.
This is a precise instrument. No internal part can be repaired by the users. If fault occurs, it is
necessary to ask qualified servicemen to repair it or contact the dealer.
Network Digital Video Recorder Operation Manual (V1.0 )
6
6
8
22
28
Table of contents
Chapter II Operation instructions
Chapter I Product Introduction
1.1 Summary
1.2 Functions and features
2.1 Description of front panel
2.2 Description of rear panel
2.3 Connection figure of rear panel
2.4 Description of alarm port in the rear panel
2.5 Remote control operation
2.6 Mouse operation
Chapter III Menu Setup
3.1 Summary of menu operation
Network Digital Video Recorder Operation Manual (V1.0 )
23
28
27
24
6
8
16
3
3.2 System setup
3.3 Camera setup
3.4 Record setup
3.5 Schedule setup
3.6 Motion alarm
3.7 PTZ setup
3.8 Network setup
3.9 Alarm setup
3.10 Disk management
3.11 User setup
32
31
34
35
36
37
38
39
40
40
40
33
43
44
Chapter IV Basic Operations
4.1 Turn on DVR
4.2 Live screen
4.3 Software update
4.4 PTZ control
Network Digital Video Recorder Operation Manual (V1.0 )
4
29
Appendix 1 Technical parameters
Appendix 2 Trouble shooting
47
47
48
48
51
52
53
53
54
55
57
51
4.5 System information
4.6 Log list
4.7 Recording preparation
4.8 Recording operation
4.9 Search, playback and backup
4.10 Audio setup
4.11 SEQ
4.12 Spot output
4.13 User login
4.14 PC Client software instruction
4.15 Power off
Network Digital Video Recorder Operation Manual (V1.0 )
5
46
1.1 Summary
Chapter I Product Introduction
1.2 Functions and features
Network Digital Video Recorder Operation Manual (V1.0 )
6
This equipment is a standalone digital hard disk video recorder specially designed for security. Itadopts the
embedded processor and embedded operating system and integrates with latest technologies in IT field, such asvideo
frequency/audio frequency compression/decompression, large capacity hard disk storage, TCP/IP networkremote
control etc., investing the system with high intellectualization and stability.
This equipment supports various networks including Ethernet and Internet torealize remote audio/video
synchronization. With easy operation, it can be applied to the security for banks, telecom, schools, hospitals,
supermarkets,residential quarters, factories, companies, warehouses, restaurants, hotels, parks, museums, water
conservancy facilities, entertainment places and other fields.
Support PAL& NTSC video signal input.
Support OSD languages of multiple countries.
Support external alarm, motion detection and time recording.
Support audio recording, audio playing and live mode listening.
If the electricity suddenly off while recording, it will record automatically when power on.
Support CMS.
Support DDNS.
Support network preview, playback, setup, remote recording, PTZ control and camera name setup.
Support IE browsing and Network remote Client.
Support Internet backup ,USB backup.
Support mouse operation with high sensitivity.
Support 2000G hard disk and DVD Writer.
Support HDMI VGA output.
Support HDMI and YPbPr output.
Support Remote Control and Control Keyboards operation.
Convenient & precise video searching.
Control PTZ and speed dome through RS485.
Specially designed dedicated file system for video to increase more than 10 times of service life of hard disk.
Fully independent from PC platform and free from computer breakdowndue to improper operations, complicated.
management & operations as well as virus infection, and with high stability.
Operating system: Linux
Compressed chip: SOC
Network Digital Video Recorder Operation Manual (V1.0 )
7
Chapter II Operation Instructions
2.1 Description of front panel
1
DescriptionNameNo.
Power
Network Digital Video Recorder Operation Manual (V1.0 )
8
2
123456
7
Number keys
Press it to turn on/off the DVR. The same as the " " key in the remote control.
a) input numbers.
b) keystroke 1~9 : select channels.
c) [0/10+]: input the number "0". Press it twice toselect channel10. Combined
number keys 1~9 to select the channels from channel 11 to 16.
d) input password.
19
0/10
Icon
Front panel A:Front panel A:
3
4
LED Indicator
light
HDD Hard drive LED indicator light. It is flash when hard drive is being used.
IR Receiver
Record
Playback/
Pause
Stop
Search
Start recording. In PTZ mode, it is used as [Z+] key on the remote control.
Press it topop up search menu, select the time segment and press it to play.
Press itagain to pause. In PTZ control mode, it is used as [Z-] key on the
remote control.
In playback mode, press it to stop playing and return to searchmenu; invideo
recording mode, press it to stop recording; in PTZ mode, press it toview preset
image.
Press it to enter search menu. In PTZ mode, press it to set preset image.
Record LED indicator light. It is on in recording mode.
REC
IR Remote signal receiver LED indicator light. It is on in remote control usable
mode.
Alarm LED indicator light. It is on when alarm happened.
Network LED indicator light. It is on in network connection mode.
ALARM
NET
LOCK Lock LED indicator light. It is on in locking mode.
Receive signal from remote control. (Do not cover).
Network Digital Video Recorder Operation Manual (V1.0 )
9
5
Indice
Altri manuali Jetcom CCTV Registratore digitale
