Jetcom CCTV SS-HDR-8704 Manuale utente
In order to ensure your rights and interests, please read this manual carefully before you install
and use the DVR.
Use the appropriate adapter for the DVR.
To protect the main chip from thunder striking, please make sure the ground wire is correctly
connected before using the DVR.
Do not expose the DVR to rain or use it under high humidity circumstance.
This DVR cannot be installed at the places with much dust, and avoid potential mechanical
vibration or impact.
Install this DVR under good air circulation conditions. Do not place it near the heater or under
direct sunlight.
Please choose high quality hard disk (HDD), which could meet the working demand of the DVR.
For its quality, please purchase hard disk from regular merchants, and do not use t he Western
Digital hard disk.
CAUTIONS
Network Digital Video Recorder Operation Manual ( V1.0 )
Before connecting to other facilities, please disconnect the power supply and pull the power line
plug out from the power socket.
In case of any solid or liquid coming into the case, please disconnect the power supply
immediately, and the DVR can be restarted only after being checked by qualifi ed se rviceme n.
If the DVR is not in use for a long period of time, please disconnect the power supply and pull
the power line plug out from the power socket.
This is a precise instrument. No internal part can be repaired by the users. If fault oc curs, it is
necessary to ask qualified servicemen to repair it or contact the dealer.
Network Digital Video Recorder Operation Manual ( V1.0 )
6
6
8
13
19
Table of contents
Chapter II Operation instructions
Chapter I Product Introduction
1.1 Summary
1.2 Functions and features
2.1 Description of front panel
2.2 Description of rear panel
2.3 Connection figure of rear panel
2.4 Description of alarm port in the rear panel
2.5 Remote control operation
2.6 Mouse operation
Chapter III Menu Setup
3.1 Summary of menu operation
Network Digital Video Recorder Operation Manual ( V1.0 )
14
19
18
15
6
8
11
3
3.2 System setup
3.3 Camera setup
3.4 Record setup
3.5 Schedule setup
3.6 Motion alarm
3.7 PTZ setup
3.8 Network setup
3.9 Alarm setup
3.10 Disk management
3.11 User setup
23
22
25
26
27
28
29
30
31
31
31
24
34
35
Chapter IV Basic Operations
4.1 Turn on DVR
4.2 Live screen
4.3 Software update
4.4 PTZ control
Network Digital Video Recorder Operation Manual ( V1.0 )
4
20
Appendix 1 Technical parameters
Appendix 2 Trouble shooting
38
38
39
39
42
43
44
44
45
46
48
42
4.5 System information
4.6 Log list
4.7 Recording preparation
4.8 Recording operation
4.9 Search, playback and backup
4.10 Audio setup
4.11 SEQ
4.12 Spot output
4.13 User login
4.14 PC Client software instruction
4.15 Power off
Network Digital Video Recorder Operation Manual ( V1.0 )
5
37
1.1 Summary
Chapter I Product Introduction
1.2 Functions and features
Network Digital Video Recorder Operation Manual ( V1.0 )
6
Support PAL & NTSC video signal input.
Support OSD languages of multiple countries.
Support external alarm, motion detection and time recording.
Support audio recording, audio playing and live mode listening.
This equipment is a standalone digital hard disk video recorder specially designed for security. It adopts the
embedded processor and embedded operating system and integrates with latest technologies in IT field, such as video
frequency/audio frequency compression/decompression, large capacity hard disk storage, TCP/IP network remote
control etc., investing the system with high intellectualization and stability.
This equipment supports various networks including Ethernet and Internet to realize remote audio/video
synchronization. With easy operation, it can be applied to the security for banks, telecom, schools, hospitals,
supermarkets,residential quarters, factories, companies, warehouses, restaurants, hotels, parks, museums, water
conservancy facilities, entertainment places and other fields.
If the electricity suddenly off while recording, it will record automatically when power on.
Support CMS
Support DDNS
Support network preview, playback, setup, remote recording, PTZ control and camera name setup.
Support IE browsing and Network remote Client.
Support Internet backup ,USB backup.
Support mouse operation with high sensitivity
Support 2000G hard disk and DVD Writer.
Support HDMI VGA output.
Support Remote Control and Control Keyboards operation.
Convenient & precise video searching
Control PTZ and speed dome through RS485
Specially designed dedicated file system for video to increase more than 10 times of service life of hard disk
Fully independent from PC platform and free from computer breakdown due to improper operations, complicated
management & operations as well as virus infection, and with high stability
Operating system: Linux
Compressed chip: SOC
Network Digital Video Recorder Operation Manual ( V1.0 )
7
Chapter II Operation Instructions
2.1 Description of front panel
DescriptionNameNo.
Network Digital Video Recorder Operation Manual ( V1.0 )
8
1Number keys
a) input numbers.
b) keystroke 1~9 : select channels.
Press it once to input number 0. Press it twice to input number 10.c) [0/10+]:
d) input password.
19
0/10
Icon
1 2
3
7
6
4 4
5
2
3
LED Indicator
light
IR Remote signal receiver LED indicator light. It is on in remote control usable
mode.
Lock LED indicator light. It is on in locking mode.
Hard drive LED indicator light. It will flash when the HDD is being used.
It is red in running mode, it is green in standby mode. It is off in pow er off
mode.
Start recording. In PTZ mode, it is used as [Z+] key in the remote control.
Press it to pop up search menu, select a video file to play. Press it to pause in
the process of playback, press it again to play again. In PTZ mode, it is used
as [Z-] key in the remote control.
In playback mode, press it to stop playing and return to search menu; in video
recording mode, press it to stop recording; in PTZ mode, press itto view preset
image.
Press it in live/record/playback mode to change the screen into four-split screen.
Press it in live/record/playback mode to change the screen into night-split screen.
To modify the parameters downward in PTZ control mode.
Press it to enter search menu. In PTZ mode, press it to set preset image.
Press it to enter search menu
LOCK
HDD
POWER
COPY
Network Digital Video Recorder Operation Manual ( V1.0 )
Record
Playback/
Pause
Stop
Search
Backup
Quad key
Nine-split key
Sixteen-split key
9
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Jetcom CCTV Registratore digitale
