JETWAY HPC-WV133 Manuale utente
Panel PC
User’s Manual
NO. G03-PC133-F
Manual Revision: 1.0
Release Date：2020/5/1
i
Safety Precautions............................................................................................................................... ii
User’s Notice..........................................................................................................................................iii
Package Contents.................................................................................................................................iii
Environmental Protection Announcement .................................................................................. iii
Chapter 1 Introduction......................................................................................................................1
1-1 General Descriptions...........................................................................................................1
1-2 Specifications........................................................................................................................ 1
1-3 I/O Outlets...............................................................................................................................3
1-4 Connector Pin Definition.................................................................................................... 4
Chapter 2 Hardware and Jumper Settings.................................................................................. 6
2-1 Dimensions and Outlines................................................................................................... 6
2-2 To Open the Chassis........................................................................................................... 7
2-3 Jumper Settings....................................................................................................................7
APPENDIX............................................................................................................................................... 9
TABLE OF CONTENT
ii
Safety Precautions
Operate the product according to the correct installation steps and with great care to make sure
safety and comfort using experience. Please refer to the following safety instruction guide to avoid
danger of electric shock or fire. Abide by the previous safety instruction guide to use and maintain
the product and the hard disk to make sure of safe operating environment.
Please follow the instruction manual for operation guide.
The appropriate operating temperature ranges from 0 °C–50 °C.
The operation humidity for this product is 5% to 80% RH.
To avoid high temperature, please DO NOT overload the maximum power of the external power
supply while the system is consuming high voltage. Be aware of the maximum temperature
allowance of the power supply.
See to it that the product is not working near the water.
Always unplug power cable and other hardware cables from the system before cleaning.
Apply only dry cloth for cleansing the product.
Make sure that there is no heat source nearby when the product is working.
Make sure that the thermal louver of the product is not blocked.
Make sure to remove the power plug from the product when there is a thunder storm.
Please remove the power plug from the product when you are not going to use the product for a
long time.
Make sure to set up or use the product on a stable surface.
Make sure not to drop the product or strike it by any means.
Make sure not to move the product when the power is on.
Make sure not to step on the power cables and other cables or rest anything in them.
Be sure to ground yourself to prevent static charge when installing any internal components. Use a
grounding wrist strap and place all electronic components in any static-shielded devices. Most
electronic components are sensitive to static electrical charge.
Disconnect the power cord from the Panel PC unit prior to any installation. Be sure both the
system and all external devices are turned off. Sudden surge of power could ruin sensitive
components. Make sure the Panel PC unit is properly grounded.
Do not open the system’s back cover. If opening the cover for maintenance is a must, only a
trained technician is allowed to do so. Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic discharge, observe the following
precautions:
Before handling a board or integrated circuit, touch an unpainted portion of the system
unit chassis for a few seconds. This will help to discharge any static electricity on
human body.
When handling boards and components, wear a grounding wrist strap available from
most electronic component stores.
Please contact qualified technician for maintenance or repair.
Use only accessories and parts that are made by the qualified manufacturer.
iii
User’s Notice
Copyright of this manual belongs to the manufacturer. No part of this manual, including the products
and software described in it may be reproduced, transmitted or translated into any language in any
form or by any means without written permission of the manufacturer.
This manual contains all information required for the utilization of this product to meet the user’s
requirements. But it will change, correct at any time without notice. Manufacturer provides this manual
“as is” without warranty of any kind, and will not be liable for any indirect, special, incidental or
consequential damages (including damages for loss of profit, loss of business, loss of use of data,
interruption of business and the like).
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and they are used only for identification or explanation and to
the owner’s benefit, without intent to infringe.
Package Contents
(Optional)
(Optional)
X1
X1
X2
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize
pollution and ensure environment protection of mother earth, please recycle.
1
Chapter 1
Introduction
1-1 General Descriptions
Thank you for purchasing the system, a new product developed, designed and
manufactured under leading technical power and consistent dedication to fine
workmanship.
13.3” 300 nits TFT LCD with LED backlight
Rockchip® ARM Cortex A17 RK3288 Quad-core 1.8GHz
On board 2GB 1333 MHz DDR3L DRAM
Onboard 8GB Flash ROM
Strong solid aluminum frame design and Fanless cooling system
Design for easy Wall mount, VESA Mount installation
A true Flat, easy-to-clean front surface with edge-to-edge design
Front IP65 for protection against water and dust
12V DC in (for HPC-133)
PoE input Support (for HPC-P133)
9-36V Wide voltage DC in (for HPC-WV133)
Support 802.11 b/g/n 2.4G, BT-V4.0
Support Android 5.1/9.0 and Debian 9.0 OS
1-2 Specifications
Display
Front Bezel
IP65, NEMA 4 rugged protection, metal front bezel
Display Type
13.3" with LED Backlight
Brightness (cd/m²)
300 nits
Display Color
262K
Resolution
1920 x 1080 @ 60Hz
Viewing Angle (H/V)
170°/170°
Pixel Pitch
0.153 x 0.153 mm
Aspect Ratio
16:10
Contrast Ratio
800:1
Response Time
35 ms
Touch Screen
Type
Projected capacitive type
Active Range
355.0 x 197.0mm ±0.3mm
Transparency
≧85%
Operating Force
≦50g
Surface Hardness
≧6H (ASTM D3363, pressure 1N/45°)
CASE
Panel Material
Aluminum
2
Case Material
Iron
Color
Black
Coating Requirement
Spray Paint
Main System
CPU
Rock Chip® ARM Cortex A17 1.8GHz/QC
RAM
Onboard 2GB DDR3L1333MHz DRAM
Flash ROM
Onboard 8GB Flash ROM
Watchdog Timer
256 levels, 0~255 sec.
Speaker
2*2W/8Ohm
Camera
1*500W USB Camera(Option)
OS Support
Android 5.1/9.0 or Debian 9.0
I/O Connector
I/O Ports & Switches
Common I/O:
2* USB2.0 (USB1 Co-lay OTG)
1*HDMI1.4
1*AUDIO(Line-out +MIC)
1*Micro SD Socket
1*Power Button
HPC-WV133:
1*RJ45
1*9~36V Wide
Voltage DC Jack
HPC-133:
1*RJ45
1*12V DC Jack
HPC-P133:
1* PoE PD
PoE(HPC-P133)
Regulatory
Compliance
IEEE802.3af (PoE)
Input Power
44～57V
Pass Through Data
Rates
10/100/1000 Mbps
Power Consumption
12.5W
Dimensions
Case Dimensions
337.8*211.4*39.0mm
Certifications
Certifications
CE, FCC, IP65(Front) -Option
Environment
Temperature
Operating: -10°C ~ 50°C
Storage: -20°C ~ 60°C
Shock
Operating: 15G, 11ms duration
Vibration
Operating: 5~500Hz/1 Grms
Warranty
Warranty
2 Years Limited Warranty （Panel and Touch is only
Warranty 1 Year）
3
1-3 I/O Outlets
HPC-WV133 Series:
HPC-133 Series:
HPC-P133 Series:
Power
Button
9~36V
DC In
RJ-45
Audio
Micro SD
Socket
HDMI
OTG/USB 2.0
USB 2.0
Power
Button
12V
DC In
RJ-45
Audio
Micro SD
Socket
HDMI
USB 2.0
Power
Button
PoE-PD
Audio
Micro SD
Socket
HDMI
USB 2.0
OTG/USB 2.0
OTG/USB 2.0
4
1-4 Connector Pin Definition
(1) Connector Function
Icon
Name
Function
Power Button
Press to turn on/off the system.
(HPC-WV133)
9~36V DC-in Power
Jack
For user to connect compatible power adapter to provide
power supply for the system (HPC-WV133 series support
9~36V wide voltage).
(HPC-133)
12V DC-in Power
Jack
For user to connect compatible power adapter to provide
12V power supply for the system.
(HPC-P133)
PoE-PD Port
This connector functions as standard RJ-45 LAN jack for
Network connection and power-in connector with
compatible PoE power cable.
(HPC-133
/HPC-WV133)
RJ-45 LAN Port
This connector is standard RJ-45 LAN jack for Network
connection.
Top: Audio Jack
Line-out & MIC audio jack.
Bottom:
Micro SD Card Slot
For user to insert compatible micro-SD (TF) card into the
socket.
HDMI Port
To connect display device that support HDMI
specification.
*USB2.0/OTG Port
To connect USB keyboard, mouse or other devices
compatible with USB specification, also can function as
USB OTG port for software upgrade flash by jumper
select.
USB 2.0 Port
To connect USB keyboard, mouse or other devices
compatible with USB specification.
*Note: OTG/USB function is selected via OTG_JP jumper.
5
(2) I/O Connectors Pin Definition
RJ-45 Ethernet Connector
Ethernet connection can be established by plugging one end of the Ethernet cable
into this RJ-45 connector and the other end (phone jack) to a 1000/100/10-Base-T
hub.
The pin assignment for RJ-45 Ethernet LAN connectors are listed as follows:
Pin
Definition
Pin
Definition
L1
MDI0+
L5
MDI2+
L2
MDI0-
L6
MDI2-
L3
MDI1+
L7
MDI3+
L4
MDI1-
L8
MDI3-
A
Active LED (Yellow)
B
100 LAN LED (Green) / 1000 LAN LED
(Orange)
6
Chapter 2
Hardware and Jumper Settings
2-1 Dimension and Outlines
* Measure Unit: mm.
Indice
Altri manuali JETWAY Pannello touch
JETWAY
JETWAY HPC104GR-HD1900B Series Manuale utente
JETWAY
JETWAY HPC-185SC-HD1900B Series Manuale utente
JETWAY
JETWAY HPC101SC-FP1900B Manuale utente
JETWAY
JETWAY G03-PCNC7ACFP-F Manuale utente
JETWAY
JETWAY HPC-104BR-2930-4G Istruzioni per il montaggio
JETWAY
JETWAY HPC170SR-ITQ170 Series Manuale utente
JETWAY
JETWAY HPC-156 Manuale utente
JETWAY
JETWAY HPC150BR-FP7200 Manuale utente
JETWAY
JETWAY HPC070SC-FP2807A Series Manuale utente
JETWAY
JETWAY HPC150C-DCP1135G7 Manuale utente
