Johnson C8000 Manuale utente
JOHNSON HEALTH TECH. CO., LTD.
No.26, Ching Chuan Rd., Taya Hsiang, Taichung Hsien 428, Taiwan, R.O.C.
TEL: +886-4-25667100 FAX: +886-4-25601087
E-mail: [email protected]
http://www.johnsonfitness.com
OWNER'S MANUAL
BIKE C8000/R8000
Oct 12, 07’
SAP#0000080430, V2.0
TABLE OF CONTENTS
INSTRUCTION
IMPORTANT SAFETY INSTRUCTIONS
SETUP THE BIKE
• Getting Started
• Making A Choice Of Site
• Stabilizing The Bike
• Adjusting The Pedal Strap
• Adjusting The Seat
• Self-Powered Features
• Unpacking The Bikes
• Upright Bike C8000 Assembly Instructions
• Recumbent Bike R8000 Assembly Instructions
• Upright Bike C8000
• Recumbent Bike R8000
ASSEMBLY
SERIAL NUMBER LOCATION
USING THE WORKOUTS
• Display Console
• Workout Parameter Prompts
• Workout Overviews
• Workout Tips
• Workout Setup Steps
• Using Fitness Networking
MANAGER'S CUSTOM MODE
• The List Of Manager's Custom Mode
MAINTENANCE
• Daily Inspection
• Daily Maintenance
• Monthly Maintenance
• Recycling the Battery
PRODUCT SPECIFICATIONS
02
03
04
08
24
25
34
36
37
01
JOHNSON BIKE C8000 / R8000
This Owner’s Manual includes the functions of the following product:
Johnson Fitness Bikes – C8000 & R8000
SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE.
INSTRUCTION
READ AND SAVE ALL INSTRUCTIONS before assembling or using Johnson Bikes.
It is strongly recommended to take the following safety instructions.
IMPORTANT SAFETY INSTRUCTIONS
0302
JOHNSON BIKE C8000 / R8000JOHNSON BIKE C8000 / R8000
See Product "Specifications" (Page 37) in this manual for product specific features, the Johnson
Upright Bike C8000 and Recumbent Bike R8000 are intended for commercial use.
It is recommended that all Johnson Fitness exercise equipment users should be informed of
the following information prior to its use.
When using the Johnson bikes, always follow basic precautions:
• To ensure your safety and to protect the unit, read all the instructions before assembling
and using the Bike.
• To ensure the proper use and safety of the Bike, make sure that all users read this manual.
Please make this manual a part of your facility’s training program. Remind the users that
before undertaking any fitness programme, they should obtain complete physical examinations
from their physicians. If, at any time while exercising, the user experiences dizziness,
pain, or shortness of breath, nausea or feels faint he or she must stop immediately.
• CAUTION: If you experience chest pain, nausea, dizziness or shortness of breath, stop
exercising immediately and consult your physician before continuing.
• Use the bike for its intended purpose as described in this manual. Do not use attachments
that have not been recommended by the manufacturer.
• Never drop or insert any object into any opening of the product. If an object drops inside,
carefully retrieve it while the unit is not in use. If the item cannot be reached, contact
Johnson Fitness or the authorized dealers.
• Never operate the bike if it is not working properly, or if it has been damaged or immersed
in water. Return the bike to Johnson Fitness or the authorized dealers for examination and
repair.
• Keep hands and feet clear at all times from moving parts to avoid injury.
•
Do not reach into, or underneath the unit, and do not tip the unit on its side during operation.
• Do not use the Johnson Bikes outside, near swimming pools or in areas of high humidity.
• Do not operate where aerosol (spray) products are being used or when oxygen is being
administered.
• Do not use this product in bare feet. Do not wear shoes with heels, leather soles, cleats or
spikes while exercising.
• Do not remove the side covers. Service should only be done by an authorized service
technician.
• Close supervision is necessary when used near children, invalids or disabled people.
• When the bike is in use, young children and pets should be kept at least three meters / ten feet
away.
•
Assemble and operate the unit on a solid, level surface. Locate the unit at least one meter / three
feet of clearance from any obstructions, including walls and furniture.
• Never face backward while using the Johnson Bike.
• Use the stationary handlebars when mount or dismount the bike.
• Do not wear any clothing that might catch on any moving parts of this bike.
ADJUSTING THE PEDAL STRAP
0504
GETTING STARTED
Read the Owner’s Manual before setting up the Johnson Fitness Bikes. Place the bikes
where they will be used before beginning the setup procedure.
MAKING A CHOICE OF SITE
STABILIZING THE BIKE
SETUP THE BIKE
JOHNSON BIKE C8000 / R8000 JOHNSON BIKE C8000 / R8000
The site should be well-lit and well-ventilated. Locate the Upright Bike C8000 or Recumbent
Bike R8000 on a structurally solid flat surface and kept a few feet from the wall or any
equipment. If the site has a heavy plush carpet, to protect the carpeting and machinery, you
should place a rigid plastic base under the unit.
Please do not place the Bike C8000 or R8000 in an area of high humidity, such as the vicinity
of a steam room, indoor pool, or sauna. Exposure to intensive water vapour or chlorine
could adversely affect the electronics, as well as other parts of the machine. To make
exercise a desirable daily activity for you, these two bikes should be in an attractive setting.
The straps are designed to fit your individual foot size and should be adjusted tight enough
to keep your feet from slipping. The pedals include spring-loaded clips for easy adjustment.
To tighten the strap, pull down the open end of the strap. To loosen the strap, push down
on the top of the clip and pull the strap up. Release the clip to lock in place.
After positioning the Bike in its intended location, check its stability by attempting to shake
it side to side. Shaking or wobbling indicates that your bike needs to be leveled.
Determine which leveler is not resting completely on the floor. Loosen the nut with one
hand to allow the leveler to rotate. Rotate the left or right leveler, and repeat the adjustment
as necessary until the bike is stable. Lock the adjustment by tightening the nut against the
rear foot support.
C8000 R8000
SELF-POWERED FEATURES
0706
ADJUSTING THE SEAT
JOHNSON BIKE C8000 / R8000 JOHNSON BIKE C8000 / R8000
To determine whether or not the seat requires adjustment, sit on it and place the foot ankle
on the pedals. The knee should bend slightly when the pedal is at the lowest point of its
rotation. It should be possible to pedal without locking the knees or shifting in the seat. The
C8000 features a vertical ratchet seat adjustment system, which makes it easy and safe to
change the height of the seat quickly.
To raise the seat, pull the seat upward to the desired
height, and let it lock in place. Test and re-adjust the
seat height as necessary.
To lower the seat, first get off the bike. Holding the
seat, pull out the yellow seat post knob. Let the seat
slide down to the desired height and release the
yellow seat post knob. Test and re-adjust the seat
height as necessary.
RECUMBENT BIKE R8000
While seated on the R8000, an optimum position will allow movement through the bottom
of the stroke without locking the knees or shifting in the seat. The knees should have a
slight bend at the point of fullest leg extension.
If the seat needs to be adjusted, lift the spring-loaded seat lever on the right side of the seat
to make adjustments. Slide the seat forward or backward to desired location. Release the
spring-loaded seat lever and gently attempt to rock forward and backward to assure it is
locked in place. Check the seat distance again and re-adjust it if necessary.
On the C8000 and R8000, the user’s pedaling generates the power to initialize and display
information on the monitor. A minimum of 15 RPM (revolutions per minute) is required to
start and maintain enough power to keep the monitor functional. If the minimum RPM is
not maintained, the monitor will begin to shutdown. The C8000 and R8000 are able to
extend time to display the monitor, at the minimum RPM not maintained, if the bikes are
equipped with the battery. The bike saves its battery charge by moving into a shutdown
mode whenever PEDAL FASTER appears on the display.
NOTE: The battery is not equipped with the bike for a standard specification.
If your bike equipped with the battery receives inconsistent use, or long time periods
between use, the battery may require recharging. The adapter is an optional accessory for
recharging the unit. To purchase the optional battery and adapter please contact Johnson
Fitness or your local dealer.
SYMPTOMS OF A LOW BATTERY
If the bike has not been used for an extended period of time, the battery may require
recharging. Symptoms of a low battery can include:
• A “LOW BATTERY” message will appear on the monitor
• Backlighting on the LCD display will be disabled
• No one uses the bike for an extended period of time.
If the battery must be recharged, use the optional power adapter charging unit. The charger
should be connected to the bike for a minimum of eight hours to ensure a thorough
charge. If LOW BATTERY still appears on the display after full charging, the battery could be
extinct. Please check with an authorized service technician for replacing the battery.
UPRIGHT BIKE C8000
REPLACING THE BATTERY
The unit’s battery is built to last for a long time. However, if
you feel that the battery may need replacing, check with an
authorized service technician.
CAUTION:
The battery stored inside the unit contains hazardous
materials to the environment. Proper disposal of the battery
is required by the local law.
C-SAFE
CARDIO
BATTERY
Hardware Kit
C8000
09
JOHNSON FITNESS TREADMILL T8000/T8000 PRO
08
JOHNSON BIKE C8000 / R8000 JOHNSON BIKE C8000 / R8000
R8000
ASSEMBLY
UNPACKING THE BIKES
The Johnson Upright Bike and Recumbent Bike are carefully inspected before they are packaged.
Carefully unpack the unit and dispose of the box material.
CAUTION: The C8000 and R8000 weight 63.5 kg (140 lbs) and 85 kg (188 lbs) separately. To
avoid injury to the user and the unit, be sure to have proper assistance to remove and move
the unit.
(A)
(B)
(D)
(H)
Hardware Kit
(K)
(L)
(G)
(C)
(E)
(F)
(A)
(J)
(I)
(F)
(D)
(B)
(C)
(E)
(G)
(H)
NOTE:
NOTE: In case these parts are missing from the package, please contact Johnson Fitness
or the local authorized dealers at once.
Main Frame Assembly
Front Handlebar Set
Console Mast
Console Set
Seat
Seat back
Seat back cover
Accessory Tray
Rear Handlebar Set
Rear Foot
Seat Frame
Hardware Kit
A
B
C
D
E
F
G
H
I
J
K
L
)
)
)
)
)
)
)
)
)
)
)
)
Main Frame Assembly
Console Mast
Rear Foot
Handlebar Set
Accessory Tray
Console Set (inside the box)
Seat
Hardware Kit
A
B
C
D
E
F
G
H
)
)
)
)
)
)
)
)
11
JOHNSON FITNESS TREADMILL T8000/T8000 PRO
10
JOHNSON BIKE C8000 / R8000 JOHNSON BIKE C8000 / R8000
ASSEMBLY EXPLODED DIAGRAM
FASTENERS & ASSEMBLY TOOLS
Button Head Bolt (M8×20L)
Button Head Bolt (M8×20L)
Button Head Bolt (M8×20L)
Socket Head Screw (M5×25L)
#6 Allen Wrench (5mm)
Open Wrench (#13 / #15)
Phillips Screwdriver (6×130L)
OPEN WRENCH(#15x#17-325L)
Allen Wrench (3mm, 55L)
PARTS NO. DESCRIPTION QUANTITY SKETCH
Z01
Z01
Z01
Z08
Z31
Z32
Z33
Z34
Z35
4
4
4
2
1
1
1
1
1
Yellow
Orange
Blue
Pink
Purple
Purple
Purple
Purple
Purple
UPRIGHT BIKE C8000 ASSEMBLY INSTRUCTIONS
COLOR
OF BAG
ASSEMBLY
STEP
STEP 1
STEP 3
STEP 4
AC1
N22 x 4
Z01 x 2
Z01 x 2
Z01 x 4
Z01 x 4
Z08 x 2
1312
STEP 1
ASSEMBLY STEPS STEP 2
Remove the nuts from the bottom of the seat. Attach the seat to the seat post with the nuts
you just removed. Tighten them with the Open Wrench (Z32).
STEP 3
Secure the upper console mast to the lower console mast using four bolts (Z01).
Alternately tighten each bolt using the #6 Allen Wrench. Check the console mast to make sure
it is securely fastened.
JOHNSON BIKE C8000 / R8000 JOHNSON BIKE C8000 / R8000
ëREAR FOOT
Install the rear foot in position at the rear of the bike with the mating holes in the frame
bracket. Insert the four bolts (Z01) through the frame bracket and rear foot. Using the #6
Allen Wrench (Z31) tightens the screws securely.
ëPEDALS
Install the pedals on the pedal cranks using the Open Wrench (Z32). The JOHNSON logo
of the pedal must point upward.
NOTE: Be careful to align the threads correctly to avoid damage. A little grease on the
threads should help the pedals to screw in easily and correctly. Turn the left pedal spindle
counterclockwise when threading into the crank arm, and turn the right pedal spindle
clockwise when threading into the crank arm.
4
4
Z01
Z01
1514
STEP 4 FINAL ASSEMBLY
OPTIONAL ENTERTAINMENT ACCESSORY SHOWN
JOHNSON BIKE C8000 / R8000 JOHNSON BIKE C8000 / R8000
ëHANDLEBAR SET
Feed the heart rate wires of the handlebar through the small hole located in the front of
the console mast. Pull these wires up through the hole at the top of the console mast.
Attach the handlebar to the console mast using four bolts (Z01). Tighten with the #6 Allen
Wrench (Z31).
ëCONSOLE
Remove the four mounting bolts from the back of the console with the Phillips Screwdriver
(Z33). Plug in the wire harness and the two heart rate wires to the back of the console.
Attach the console to the console mast with the four bolts removed earlier in this step.
ëACCESSORY TRAY
Attach the accessory tray to the console mast using two screws (Z08). Tighten them with
the Phillips Screwdriver (Z33).
4
Z08
Z01
1716
RECUMBENT BIKE R8000 ASSEMBLY INSTRUCTIONS
FASTENERS & ASSEMBLY TOOLS
JOHNSON BIKE C8000 / R8000 JOHNSON BIKE C8000 / R8000
ASSEMBLY EXPLODED DIAGRAM
Spring Washer
Arc Washer
Socket Button Head Screw (with Nyloc)
Button Head Screw (Phillips)
Socket Low Head Screw (with Nyloc)
Socket Flat Head Screw
Socket Low Head Screw (with Nyloc)
Socket Low Head Screw (with Nyloc)
Socket Button Head Screw (with Nyloc)
Spring Wahser
Socket Head Screw
Spring Washer
Open Wrench (#15 / #17)
#5 Allen Wrench
#4 Allen Wrench
Phillips Screwdriver
#5 Allen Wrench
PARTS NO. DESCRIPTION QUANTITY SKETCH
Z01
Z02
Z03
Z13
Z04
Z05
Z04
Z04
Z09
Z10
Z11
Z12
Z31
Z32
Z33
Z34
Z35
8
8
8
2
4
3
4
4
4
4
2
2
1
1
1
1
1
White
White
White
White
Yellow
Red
Blue
Orange
Black
Black
Black
Black
Purple
Purple
Purple
Purple
Purple
COLOR
OF BAG
ASSEMBLY
STEP
STEP 4
STEP 1
STEP 3
STEP 6
STEP 5
STEP 2
Z13
Z04
Z04
Z04
Z11
Z12
Z09
Z10
Z03
Z01
Z02
Z02
Z01
Z03
Z05
Z04
Altri manuali per C8000
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Johnson Cyclette
Johnson
Johnson Matrix Retail R30 Manuale utente
Johnson
Johnson C8000 Manuale utente
Johnson
Johnson R7000 Manuale utente
Johnson
Johnson C7000 Manuale utente
Johnson
Johnson C7000 Manuale utente
Johnson
Johnson JCC 5100 Manuale utente
Johnson
Johnson JPC-5000 Generator Series Manuale utente
Johnson
Johnson CLASS CYCLE P8000 Manuale utente
