Johnson 40-6636 Manuale utente
©2012 Johnson Level & Tool 1
Model No. 40-6636 Sel -Leveling
360º Line Laser
Model No. 40-6637 Sel -Leveling
360º Line Laser w/4 Horizontal Dots
Model No. 40-6638 Sel -Leveling
360º Line Laser with Detector
Model No. 40-6639 Sel -Leveling 360º Line
Laser w/4 Horizontal Dots and Detector
Instruction Manual
Congratulations on your choice of this Self-Le eling 360º Line Laser. We suggest
you read this instruction manual thoroughly before using the instrument. Sa e this
instruction manual for future use.
These lasers emit one 360º horizontal laser beam or one 360º horizontal laser beam
with four dots that are 90º to each other. The laser features visual and audible out of
range indication and a pendulum-locking design. Beam visibility depends upon
lighting conditions in the work area.
This is a Class IIIa laser tool and
is manufactured to comply with
C R 21, parts 1040.10 and
1040.11 as well as international
safety rule IEC 285.
!
6249H-All_Manuals 10/22/12 7:58 AM Page 1
2©2012 Johnson Level & Tool
Table of Contents
1. Kit Contents
2. eatures and unctions
3. Safety Instructions
4. Location/Content
of Warning Labels
5. Location of Parts/Components
6. Operating Instructions
7. Using the Product
8. Self-Check & ine Calibration
9. Technical Specifications
10. Application Demonstrations
11. Care and Handling
12. Product Warranty
13. Warranty Registration
14. Accessories
1. Kit Contents
Description odel No’s 40-6636 & 40-6637 Qty.
Self-Leveling 360º Line Laser 1
Wall Mount Bracket 1
“AA” Alkaline Batteries 4
Instruction Manual with Warranty Card 1
Soft-Sided Carrying Case 1
Description odel No’s 40-6638 & 40-6639 Qty.
Self-Leveling 360º Line Laser 1
Wall Mount Bracket 1
“AA” Alkaline Batteries 4
Detector with Bracket and 9V Battery 1
Instruction Manual with Warranty Card 1
Soft-Sided Carrying Case 1
2. Features and Functions
• Indoor and outdoor use (for outdoor use, must use 40-6780
detector included in 40-6638 and 40-6639).
• 40-6636 and 40-6638 emit a self-leveling 360º horizontal line
and the 40-6637 and 40-6639 emit a self-leveling 360º
horizontal line and 4 dots that are 90º to each other.
6249H-All_Manuals 10/22/12 7:58 AM Page 2
©2012 Johnson Level & Tool 3
3. Safety Instructions
Please read and understand all of the following instructions, prior
to using this tool. ailure to do so, may void the warranty.
DANGER!
Class IIIa Laser Product
Max. Power Output: ≤5mW
Wavelength: 625-645nm
THIS TOOL E ITS LASER RADIATION.
DO NOT STARE INTO BEA .
AVOID DIRECT EYE EXPOSURE.
ATTENTION IMPORTANT
• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.
• Do not stare directly at the laser beam.
• Do not project the laser beam directly into the eyes of others.
• Do not set up laser tool at eye level or operate the tool near a reflective surface as
the laser beam could be projected into your eyes or into the eyes of others.
• Do not place the laser tool in a manner that may cause someone to unintentionally
look into the laser beam. Serious eye injury may result.
• Do not operate the tool in explosive environments, i.e. in the presence of gases or
flammable liquids.
• Keep the laser tool out of the reach of children and other untrained persons.
• Do not attempt to view the laser beam through optical tools such as telescopes as
serious eye injury may result.
• Always turn the laser tool off when not in use or left unattended for a period of time.
• Remove the batteries when storing the tool for an extended time (more than 3 months)
to avoid damage to the tool should the batteries deteriorate.
• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt
to repair this tool, warranty will be void.
• Use only original Johnson®parts and accessories purchased from your Johnson®
authorized dealer. Use of non-Johnson®parts and accessories will void warranty.
6249H-All_Manuals 10/22/12 7:58 AM Page 3
4©2012 Johnson Level & Tool
4. Location/Content of Warning Labels
6249H-All_Manuals 10/22/12 7:58 AM Page 4
©2012 Johnson Level & Tool 5
5. Location of Part/Components
Keypad
5/8” Screw
Thread
1/4" Screw
Thread
Battery Compartment
Screw
Transportation Lock
ON/O
Self-
Calibration
Aperture
Laser Output Windows
6249H-All_Manuals 10/22/12 7:58 AM Page 5
6©2012 Johnson Level & Tool
6. Operating Instructions
I PORTANT: It is the responsibility of the user to verify the
calibration of the instrument before each use.
Battery Installation
Note: Always check to be sure that the on/off switch is in the off
position before removing and replacing batteries.
Loosen the battery compartment screw, put 4 x AA alkaline batteries
into the battery compartment according to the polarity indication
shown in the battery compartment. Then put the battery
compartment back on and tighten the battery door screw.
Note:
• When power indication LED is flashing, alkaline batteries should
be replaced soon.
• Pay attention to the polarity of the batteries.
• Used (discharged) batteries are hazardous waste and should be
disposed of properly.
Battery
Compartment
Screws
Polarity Indication of Battery
6249H-All_Manuals 10/22/12 7:58 AM Page 6
©2012 Johnson Level & Tool 7
7. Using the Product
Place the laser onto any flat surface.
Connect the laser to the bracket with the 5/8” screw on the bottom of
the bracket, attach the bracket to any metal surface or strap it to a
column, or hang it on a wall.
The laser can also be placed on a 5/8” or 1/4” tripod.
Placement Strap
Magnet
Screw holes
for hanging
on a wall
6249H-All_Manuals 10/22/12 7:58 AM Page 7
8©2012 Johnson Level & Tool
Keypad Operations
Power LED:
Light On: Power on
Light Off: Power off
Light lashing: Low Battery
anual ode LED:
Light lashing: Manual mode is on and laser is on with
compensator locked
Light Off: Manual mode is off
Pulse ode LED:
Light On: Pulse mode is on and the laser can be used with the
40-6780 detector (included with 40-6638 & 40-6639)
Light Off: Pulse mode is off
Note: When manual mode is on, the laser does not self-level and
no out-of-level alarm is indicated.
Pulse Mode LED
Combination Button of Manual Mode and Pulse Mode
Manual Mode LED
Power LED
6249H-All_Manuals 10/22/12 7:58 AM Page 8
Output of the Laser:
Combination anual ode Button/Pulse ode Button:
When the laser is locked, press this button to enter into Manual
Mode, the Power LED is on, the Manual Mode LED flashes and the
laser line is on.
Press this button a second time, the Pulse Mode LED is on, the laser
line gets less bright and can be used with the detector.
Press this button a third time, Manual Mode LED, Power LED and
Pulse Mode LED are off.
When the laser is unlocked, the laser line will be on, press this button
to enter into Pulse Mode. The Pulse Mode LED is on and the laser
line will get less bright. Press this button again, and the laser will
exit the Pulse Mode and the Pulse Mode LED will turn off. When the
laser is locked, the laser line and LED will be off.
Notes:
1. The Manual Mode function is for out-of-level lines.
©2012 Johnson Level & Tool 9
Laser Line
Output of 40-6636 & 40-6638 Output of 40-6637 & 40-6639
Laser Dot
Laser Line
6249H-All_Manuals 10/22/12 7:58 AM Page 9
10 ©2012 Johnson Level & Tool
2. While the laser is in the unlocked position, the laser can not enter
into Manual Mode and will enter into self-leveling.
Power On/Off:
Turn the laser on by turning the compensator transportation lock dial
clockwise from the locked position to the unlocked position. The
power LED is on and the laser beam is on. To turn the laser off, turn
the compensator transportation lock dial counter-clockwise from the
unlocked position to the locked position. The power LED and laser
beam will turn off.
6249H-All_Manuals 10/22/12 7:58 AM Page 10
Questo manuale è adatto per i seguenti modelli
3
Indice
Lingue:
Altri manuali Johnson Livello laser
Johnson
Johnson 40-6674 Manuale utente
Johnson
Johnson Hot Shot 40-0917 Istruzioni utente
Johnson
Johnson 40-6250 Istruzioni operative e di manutenzione
Johnson
Johnson 1876-2400 Manuale utente
Johnson
Johnson 40-6647 Manuale utente
Johnson
Johnson 40-6532 Manuale utente
Johnson
Johnson 40-6616 Manuale utente
Johnson
Johnson 40-0915 Manuale utente
Johnson
Johnson 40-6602 Manuale utente
Johnson
Johnson 1888-0700 Manuale utente
Johnson
Johnson 40-6250 Manuale utente
Johnson
Johnson 9100 Manuale utente
Johnson
Johnson 1880-2400 Manuale utente
Johnson
Johnson 40-6060 Manuale utente
Johnson
Johnson 40-6692 Manuale utente
Johnson
Johnson 40-6080 Manuale utente
Johnson
Johnson HOT SHOT 9105/40-0910 Manuale utente
Johnson
Johnson 40-6028 Manuale utente
Johnson
Johnson 40-6584 Manuale utente
Johnson
Johnson 40-6690 Manuale utente
