machine can lead to serious personal injury or even death.
Kingon is always willing to ram on improving the value of its machine to users by means of modifications or
alterations. See section 1.6.
2.2.6 Guarantee
The machine has a guarantee period of 12 months after installation. Excluded are the components that wear
during normal use (e.g. transport rollers, etc.) and electric components. The customer must inform the dealer
concerning the defects together with the serial number of the machine. The customer must be able to hand
over the defective component to the dealer. The dealer will solve the defects within a reasonable period.
When the defect must be ram on at the customer’s premises, the customer is responsible for the extra costs.
These extra costs are for labor, traveling and/or staying overnight.
The dealer has no liability for accidents with personnel or delay of the production process. The dealer can not
guarantee that the machine meets the EC requirements when the machine is adjusted by the customer with
components that are not recommended y the dealer.
2.2.7 Safety - transport
Note
As a rule, the machine is transported by the dealer, or with the help of the instruction that are
provided by the dealer.
In the case of a relocation of the machine, observe the safety instructions given in chapter 4.
2.2.8 Safety - installation
Note
As a rule, the machine is installed, adjusted and commissioned by the dealer, or with the help
of the instructions that are provided by the dealer.
In the case of a relocation of the machine, observe the safety instructions given in chapter 5.
2.2.9 Safety - operation
●Observe the general safety instructions. See section 2.2.1
●Make sure that the machine and its immediate vicinity remains dry.
●Keep away ram on moving parts.
●Do not stand on the turntable, even when the machine has been switched OFF.
●Do not touch the area between the turntable and the base plate of the machine (risk of crushed fingers).
●When the machine is running:
─Do not touch the pallet.
─Stay clear from the area between the column and the pallet (risk of being caught between the film
and the pallet).
─Do not try to manually stop or hold a pallet. Use the emergency stop button.
●Always wear the personal protection equipment prescribed or recommended by the user.
●During operation, the film reel carriage moves up and down. Stay clear from the film reel carriage (risk of
crushed fingers-risk of foot injury).
2.2.10 Safety - maintenance
●Observe the general safety instructions. See section 2.2.1.
●Before starting any maintenance work (even cleaning):
─Set the main switch in the “OFF”position (0).
─Remove the mains plug from the power outlet.
─Wait at least two minutes.
●Do not clean the machine with water (risk of electric shock).
●Do not clean the machine with solvents. Only use a dry cloth and a mild detergent to clean the machine.
●If safety features have been bridged or (temporarily) disabled, immediately reactivate or enable the
