Juhui JH-TX162 Manuale utente
JH-TX162
Auto-scan Type
Multi-frequency
Face to face copy
Up to 4 different remotes in 1
NEW UNIVERSAL
REMOTE CONTROL
www.juhuico.com
www.juhuico.com
FIXED CODE
DUPLICATING PROCEDURES
1.While pressing the button 1 of the remote, press 4 times the button 2.
2.Release both buttons. Now the led of the remote emits a quick flash every 2 sec.
3.Place the original remote control in front of the remote , at about 2-3 cm of distance (as shown in the picture
below).
4.Press and retain pressing the button of the original remote control that you want to copy until the remote's led
will change frequency of flashing (faster than before), as confirm of the correct copy of the code.
5.While the LED is flashing, press the button of the JH-TX162 where you want to store ,the remote'code just
copied, until the led will turn off.
6.The copy has happened with success, verify on the automation the orderly functioning of the new remote control.
Note:
•If the LED will flash only 3 times and then will turn off, it means that the code hasn‘t been copied well. In this case
repeat the operation from the point 1.
•The memory of the remote is completely re-writable.
•To duplicate a second button, repeat the operation from the point 1.
Best position for duplication
www.juhuico.com
ROLLING SIMPLE
DUPLICATING PROCEDURES
1.While pressing the button 1 of the remote , press 4 times the button 2.
2.Release both buttons. Now the led of the remote emits a quick flash every 2 sec.
3.Place the original remote control in front of the remote , at about 2-3 cm of distance (as shown in the picture
below).
4.Press and retain pressing the button of the original remote control that you want to copy until the remote's led
will change frequency of flashing (faster than before), as confirm of the correct copy of the code.
5.While the LED is flashing, press the button of the JH-TX162 where you want to store, the remote'code just
copied, until the led will turn off.
6. The copy has happened with success.
7.Proceed with the remote control recognition on the receiver by the procedure (verify the models list - see
5-6-7 pages) or follow the producer's methods.
Note:
•If the LED will flash only 3 times and then will turn off, it means that the code hasn't been copied well. In this case
repeat the operation from the point 1.
•The memory of the remote is completely re-writable.
•To duplicate a second button, repeat the operation from the point 1.
To activate the remote control on the receiver for models marked with proceed as below:
1. First of all you must be closed to the automation.
2. Press and retain pressed the programmed button for about 10 sec, when the LED start to flash, release the button.
3. Wait until the LED will turn off. The operation has been done, now you can use your new remote control.
To activate on the receiver all the others models: Refer to the instructions of the original model.
NOTE: The seed code of the remote can be emitted as below:
1.Press the buttons 1 and 2 simoultaneously for 8 sec. and release them when the LED start to flash
2.While the LED is flashing press the button with the seed code needed.
ATTENTION!! Every kind of receiver can have the “radio-mode” disarmed. In this cases will be necessary insert the new remotes controls with the “manual procedures”
AMC
AMC
AMC:Automatic matching code
www.juhuico.com
1.While pressing the button 1 of the remote, press 4 times the button 2.
2.Release both buttons. Now the LED of the remote emits a quick flash every 2 sec.
3.Place the original remote control in front of the remote, at about 2-3 cm of distance
4.Press and retain pressed the button of the original remote control that you want to copy until the remote's led will turn on
with a fix light and then emits a double flash every 2 sec.
5.Transmit now the seed code of the original remote control (by pressing the rear hide button or the buttons 1 and 2
simultaneously in the new models)
6. Now the LED will flash quickly, press the button of the remote where you want to store the code just copied, until the
LED will turn off.
7.Now activate the procedure to insert the new remote control on the receiver.
ATTENTION, PLEASE: Verify that the remote control to be copied is a MASTER.
Pressing any button, the LED should issue a double flash rather than switch on immediately as a fixed light.
1.While pressing the button 1 of the JH-TX162, press 4 times the button 2.
2.Release both buttons. Now the LED of the JH-TX162 emits a quick flash every 2 sec.
3.Place the original remote control to clone in front of the JH-TX162 at a distance of 2-3 cm.
4.Press and retain pressed the original remote control button that you want to copy until the LED JH-TX162 switches on a fixed light and then It stars to emit a double flash every
2 seconds.
5.Predispose the FAAC/GENIUS remote control for the emission of the seed code (by pressing simultaneously the buttons 2 and 3)
6.While the FAAC/GENIUS LED is flashing, place it in front of the JH-TX162, at about 2-3 cm of distance and press the button that you want to copy until the remote’s led will
change frequency of flashing (faster than before), as confirm of the correct copy of the code.
To activate the remote control on the receiver for models
marked with proceed as below :
1. First of all you must be closed to the automation
2. Press and retain pressed the programmed button for about
10 sec, when the LED start to flash, release the button..
3. Wait until the LED will turn off. The operation has been
done, now you can use your new remote control .
To activate on the receiver all the others models:
Refer to the instructions of the original model.
NOTE: The seed code of the JH-TX162 can be emitted as
below:
1. Press the buttons 1 and 2 simoultaneously for 8 sec. and
release them when the LED star to flash.
2. While the LED is flashing press the button with the seed
code needed.
ATTENTION!! Every kind of receiver can have the “radio-
mode” disarmed. In this cases will be necessary insert the
new remotes controls with the “manual procedures”.
BFT AMC
AMC
AMC
AMC:Automatic matching code
www.juhuico.com
To activate the remote control on the receiver for models
marked with proceed as below :
1. First of all you must be closed to the automation
2. Press and retain pressed the programmed button for about
10 sec, when the LED start to flash, release the button..
3. Wait until the LED will turn off. The operation has been
done, now you can use your new remote control .
To activate on the receiver all the others models:
Refer to the instructions of the original model.
NOTE: The seed code of the JH-TX162 can be emitted as
below:
1. Press the buttons 1 and 2 simoultaneously for 8 sec. and
release them when the LED star to flash.
2. While the LED is flashing press the button with the seed
code needed.
ATTENTION!! Every kind of receiver can have the “radio-
mode” disarmed. In this cases will be necessary insert the
new remotes controls with the “manual procedures”.
1.While pressing the button 1 of the remote, press 4 times the button 2.
2.Release both buttons. Now the LED of the remote emits a quick flash every 2 sec.
3.Place the original remote control in front of the remote , at about 2-3 cm of distance.
4.Press and retain pressed the button of the original remote control that you want to copy until the remote's led will turn on
with a fix light and then emits a double flash every 2 sec.
5.Press and retain pressed once again the same button of the original remote control.
6.Now the LED will flash quickly, press the button of the remote where you want to store the code just copied, until the LED
will turn off.
7.Now activate the procedure to insert the new remote control on the receiver.
V2
433-868
AMC
AMC
AMC
AMC:Automatic matching code
www.juhuico.com
ACM
TX2, TX2 COLOR, TX4
ADYX
TE4433H BLUE, 433-HG BRAVO
AERF
COMPACT, HY-DOM, MERCURI B, MERCURI C,
SABUTON, MARS, SATURN, ST3/N, TERRA, TMP-1,
TMP-2, UNITECH
ALLMATIC
BROWN, BROWN RED, BRO.OVER, PASS,
MINIPASS, TECH3
APERIO
GO, GO PRO, GO MINI
APERTO (Sommer)
TX02-434-2,TX02-868-2 BLUE,4025 TX02-868-2,4022
TX02-434-2, 4020-TX03-434,TX-03-868-4,4013,TX03-
434-4
APRIMATIC
TR2/TR4, TM4, TXM
ATA
PTX4 BLUE, PTX4 PINK
AVIDSEN
104251, 104250, 104250 OLD, 104250
RED, 104257, 104350, 654250
BALLAN
FM400, FM400E,FM404B,4013
BENINCA
TO. GO. WV, TWV, ROLLKEY, APPLE, LOT WCV,
CUPIDO, TO.GO. QV, IO,
LOT2WCV,LOT1W,LOT2W,LOT4W,LOT1WM,LOT2W
M, T2W,T4W,APPLE
BESIDE
BEZAP,HIT
BFT
MITTO, MITTO M ( MITTO2M/MITTO4M), MITTO RCB
(MITTO RCB02/RCB04), MITTO A (MITTO 2A/MITTO
4A), MITTO B, TRC(TRC2/TRC4), GHIBLI, MURALE,
KLEIO,TE01,TE02,TE04,RB4 MURALE
CAME
T431,T434,TOP432A,TOP434A,TOP432,TAM432SA,TO
P432NA
CARDIN
TRQ S449
(TRQ449100/TRQ449200/TRQ449300/TRQ449400),
TRQ S449 GREEN (PRECODE),
TXQ S449 (TXQ449200/TXQ449300/TXQ449400), TXQ
S449 GREEN, TRQ S486 (TRQ486200/TRQ486400),
TXQ S486 (TXQ486200/TXQ486400), S437 TX,
XRADO,S449,S476TX2,S476TX, S486
CASALI
JA33 AMIGO, GENIUS/CASALI A252RC
AMC:Automatic matching code
AMC
AMC
AMC
AMC
AMC
AMC
www.juhuico.com
CASIT
ERTS92B,ERTS92T,ERTS476D,ERTS20DQ,ERTS476D,
ERTS476Q
CELISA
S10 1, S10 2
CENTURION
CLASSIC,NOVA,SMART
CHAMBERLAIN/LIFT
MASTER/ MOTOR LIFT
953ESTD, 371 LM, 971 LM, 84330E, 94334CE,
94333E/94334E/94335E, 9747E, 1A5639-7, 1A5477,
1A6487, 132B2372, 94330EML/9333EML/94335EML,
84330EML/84333EML/84335EML, 8747EML
CLEMSA
MUTANCODE, T, T-8, E-CODE N, MASTERCODE MV
CPS
TCP3,CPS1,TCP3,CPS2,TCP3,CPS4,TCP3
DASPI
HAPPY2,POPS 2, ZERO RC( ZERO 2RC,ZERO 4RC)
DEA SYSTEM
TR MIO,133 1,433 2,433 4,GENIE,PUNTO S2, PUNTO
278, GOLDR, GENIE R 273, GENIE R-GT2N
DELMA
MIXARD 433 1, MIXARD 433 2,KING 433 2
DICKERT
MAHS433 01, MAHS433 04
DITEC
GOL,GOL4C,BIXLS2,BIXLP2,BIXAG4, BIXLG
DOITRAND
MPSTF2E,JAUNE
DOORMATIC
SAW
DOORHAN
TRANSMITTER 4
DUCATI
TSAW1,TSAW2,TSAW3,124,TE2
ECOSTAR
RSE,RSC,RSZ
ELBE
501,502,504,502A,504A
ERREKA
IRIS, ROLLER 2, ROLLER 433, ROLLER 868,
SOL433, SOL868, VEGA 433, VEGA 868
ELCA
IRIS,ASTER 2,ASTER
1000,ASTER 1001
AMC:Automatic matching code
AMC
AMC
www.juhuico.com
FAAC
XT4 433 RC,TE433HG
TM1 433 DS,TM2 433 DS,TM3 433
DS,433L2,433L4,TM22 433 SLP,TM4 433 SLP, TML
433SLH, TML 868 SLH, DL 868 SLH, XT 868SLH, XT
433 SLH, T 868 SLH, T 433 SLH, XT 433 RC,
FADINI
JUBI-SMALL,433 M2, ASTRO 433-2,ASTRO 433-
4,JUBI2/JUBI4
FERPORT
TAC1,TAC2,TAC4,TAC 1K,TAC 2K,TAC 4K,TAC2KR
GIBIDI
OPEN TMB, OPEN OUT, AU1600, AU1600
WOOD, AU1680, AU1680 WOOD, DOMINO
GULLIVER
MDW
GENIUS
BRAVO TE4433H, ECHO
GENIE
GITR-3, GIT, GICT390, GIFT390-1, G3T-BX, G1T-BX,
GM3T, GICTD, GIFTD
GIBIDI
AUO1590,AU1600,DOMI-NO AU1680 WOOD,GIBIDI
AU1610,AU1810,AUO3000,DTC 4334
HORMANN
HSM2,HSM4
JCM
NEO, TWIN, GO, GO PORTIS, GO NORTON
JAY
UBEI X1SL1,UBET 11,UBET 21,UBET 31,UBET
41,UBET 61
KBLUE
ETH-TEL01
KEY
900TXB-42R,SUB44,TXB-44R,TXG-44R
KING GATES
STYLO, CLIPPER
KLING
KUA, KUA E, KUA S
LABEL
SPYCO,RJW4E
LEB
TMW
LINCE
LR2035
LIFE
FIDO
AMC:Automatic matching code
AMC
AMC
AMC
AMC
JA332 AMIGO 2 868,JA334 AMIGO
4, AMIGOLD 2/AMIGOLD 4,
KILO 2/KILO 4 433 JLC,
KILO2/KILO4 868 JL
www.juhuico.com
LINEAR
MCT-11, ACT-21, ACT-22, STING RAY ACT-31,
STING RAY ACT-34B
MHOUSE
TX4
MA
TX1,TX2,TX3
MARATEC
D101,D12,DIGITAL302,DIGITAL304
MERLIN/PROLIFT
M230T(PROLIFT),M430R(PROLIFT)
MERLIN2.0
E945M,E943M,E940M
MERLIN/PROLIFT
M842(GREENREMOTE),M832(GREEN
REMOTE),M844(GREEN REMOTE),C945,C940,C943
MHOUSE
TX4,TX3,GTX4
MOOVO
MT4G
MONSEIGNEUR
ARC
NICE
SMILO,FLOR-S,VERY-VR, INTI,FLO2,FLO4, FLOR-S
ERA, ONE (ON), ON ERA, ERGO, PLANO, ONE (ON
FM)
NORTON
NEO, TXCD, GO NORTON, GO
MINI NORTON
NOVOTECNICA
BIXL2
NOVOTRON 502-504-512MIX43-2,MTR40-2,MCHS43-
2,MHS43(2-4),MNHS433(2-4), MCHS, MINI-
NOVOTRON 504, MICRO-NOVOTRON 502, MICRO-
NOVOTRON 504, MICRO-NOVOTRON 31, MICRO-
NOVOTRON 51, MINI-NOVOTRON 30, MINI-
NOVOTRON 50, MNHS
NOVOFERM
NOLOGO
ECO DIP
NORMSTAHL
T433
O & O
T.COM,TWIN,TX,TWIN,TX2/TX4(NEO),T.COM R4-
2/T.COM R4-4, T.COM R8-2/T.COM R8-4,
OG
OG62,OG64
OPENOUT
TMQ
PECCININ
TX MENBRANA
AMC:Automatic matching code
AMC
AMC
AMC
AMC
AMC
www.juhuico.com
PORTAMATIC
MPH01,MPH02
PRASTEL
TC2E(4E),SLIM,BFOR,MPSTP2E,MPSTF2,MPSTF4,M
PSTF2RE, MPSTF4RE,,MPSTP2E,MPSTP2E BLUE,
MTE(MT4E,MT2E),TRQ-P(TRQ4P,TRQ2P),
MPSTLE(MPSTL-1E,MPSTL-2E,MPSTL-4E)
PROEM
ER4C4ACS
PROGET
ETY_433N2,ETY_433N4
PROTECO
TX433,EUROMATIC
PUJOL
MARTE,P215, TWIN, VARIO, VARIO MARS, VARIO
OCEAN, NEO
QUASAR
433
RIB
LITHIO
ROPER
NEO, GO ROPER, GO MINI ROPER
SABUTOM
BROOVER, BROSTAR
SEA
SMART DIP
SEAV
BE HAPPY RS(BE-HAPPY-RS1,BE-HAPPY-RS2,BE-
HAPPY-RS3),BE-SMART RSX, BE-HAPPY RH1,BE-
HAPPY RH2,BE-HAPPY RH3
SECULUX
NEO
SILVELOX
Mhz 2007, QUARZ SAW
SIMINOR
CVXNL, MITTO, SIM433
SECURVERA
SV R2C,SV R4C,SV R6C
SERAI
OG/52,OG54,OG82,OG84,OG/28,OG48,OG62,OG64
SIMINOR
S433(2T-4T),ER2C4ACS,ER4C4ACS
SOMFY
STAGNOLI
KALLISTO, VENUS AV223
AMC:Automatic matching code
AMC
TELIS 1 RTS/TELIS 4 RTS
AMC
KEYTIS 2 NS/KEYTIS 4 NS,KEYGO 4
RTS,SOMFY 433-NLT4 BEIGE, SOMFY
433-NLT2 RTR, SOMFY TX2 433MHZ
Altri manuali Juhui Telecomando
