Juniper EX8200 Series Manuale di istruzioni

Installing a DC Power Supply in an EX8200 Switch

The DC power supply in an EX8200 switch is a hot-removable and hot-insertable

field-replaceable unit (FRU). Up to six DC power supplies can be installed in an

EX8200 switch. All DC power supplies install in the front of the chassis in the slots

provided at the bottom. See Slot Numbering for an EX8208 Switch and Slot Numbering

for an EX8216 Switch.

NOTE: EX8208 switches support 2000 W DC power supplies.

EX8216 switches support 3000 W DC power supplies.

Before you install a DC power supply in the switch:

■Ensure you understand how to prevent ESD damage. See Prevention of

Electrostatic Discharge Damage on EX Series Switches.

Ensure that you have the following parts and tools available to install a DC power

supply in an EX8200 switch chassis:

■Electrostatic discharge (ESD) grounding strap

■Phillips (+) screwdriver, number 1

To install a DC power supply in an EX8200 switch (see Figure 1):

1. Attach the electrostatic discharge (ESD) grounding strap to your bare wrist, and

connect the strap to the ESD point on the chassis.

2. If the power supply slot has a cover panel on it, unscrew the screw on the side

of the cover panel in the counterclockwise direction using the Phillips (+)

screwdriver, number 1, and remove the cover panel. Save the cover panel for

later use.

3. Taking care not to touch power supply components, pins, leads, or solder

connections, remove the power supply from its bag.

4. Flip the Enable switch on the power supply to the Standby position.

5. Unscrew the captive screw in the counterclockwise direction using the Phillips

(+) screwdriver, number 1.

6. Pull the captive screw away from the faceplate of the power supply to release

the latch.

7. Pull the handle away from the faceplate of the power supply until it is

perpendicular to the faceplate.

NOTE: Power supplies can be installed in any slot. You do not have to install the

power supplies in serial order.

Installing a DC Power Supply in an EX8200 Switch ■1

8. Using both hands, place the power supply in the power supply slot on the front

of the switch. Slide the power supply straight into the chassis until the power

supply is fully seated in the slot. Ensure the power supply faceplate is flush with

any adjacent power supply faceplates or power supply cover panels.

9. Push the handle towards the faceplate of the power supply until it is flush against

the faceplate.

10. Push the captive screw into the power supply faceplate. Ensure that the screw

is seated inside the corresponding hole on the faceplate.

11. Tighten the captive screw by turning it clockwise using the Phillips (+)

screwdriver, number 1. When the screw is completely tight, the latch locks into

the switch chassis.

To connect power to a DC power supply, see Connecting DC Power to an EX8200

Switch

Figure 1: Installing a DC Power Supply in an EX8200 Switch

Related Topics Removing a DC Power Supply from an EX8200 Switch■

■DC Power Supply in an EX8200 Switch

Published: 2009-10-08

2■Installing a DC Power Supply in an EX8200 Switch

Altri manuali per EX8200 Series

13

Indice

Altri manuali Juniper Interruttore

Juniper

Juniper EX2200 Series Manuale utente

Juniper

Juniper EX Series Manuale utente

Juniper

Juniper EX4500 Series Istruzioni per l'installazione

Juniper

Juniper EX8208 Manuale utente

Juniper

Juniper EX3200 Series Guida

Juniper

Juniper EX8200 Series Manuale utente

Juniper

Juniper OCX1100-48SX Manuale utente

Juniper

Juniper EX4600 Manuale utente

Juniper

Juniper PTX Series Istruzioni per l'installazione

Juniper

Juniper Day One+ Manuale utente

Juniper

Juniper EX4600 Istruzioni per l'installazione

Juniper

Juniper EX3200 Series Manuale utente

Juniper

Juniper EX Series Guida

Juniper

Juniper EX8208 Manuale utente

Juniper

Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV... Manuale utente

Juniper

Juniper EX3200 Series Istruzioni per l'installazione

Juniper

Juniper QFX5230-64CD Istruzioni per l'installazione

Juniper

Juniper EX9214 Istruzioni per l'installazione

Juniper

Juniper QFX10002 Istruzioni per l'installazione

Juniper

Juniper EX3200 Series Istruzioni per l'installazione

Juniper

Juniper EX4500 Series Manuale utente

Juniper

Juniper EX4300 Manuale utente

Juniper

Juniper EX3400 Manuale utente

Juniper

Juniper EX3300 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente