- 7 -
:#$;.9)(7,.8$).5$,./+)33)+,-.$
5.1 Unpacking
Open the box from the top surface of the box, remove the foam, open the plastic
bag, pull the back cover handle, and take out the oxygen generator.
5.2 Inspection
First check the oxygen generator for transportation damage, and then check the
accessories and random documents according to the packing list.
5.3 Installation precautions
When installing the oxygen generator, please observe the following precautions:
5.4 Installation
1) Before use, loosen (or draw out) the bottom Velcro strap to avoid the air
compressor working in a vibration state.
2) Add water to the humidifier: Turn off the power of the oxygen generator, put your
fingers on the fingers of the humidifier, and gently pull out the humidifier. Pull out the
water-filled silicone plug on the humidifier, The water injection funnel delivered is
Installation Precautions
1. The oxygen generator should be installed in an indoor ventilation place free of dust, corrosion, toxic and
harmful gases and oil mist. Avoid direct sunlight, and the distance from the wall and other objects should be greater
than 20 cm.
2. The oxygen generator cannot be installed in a place with bright or dark fire sources, flammable, explosive
danger, humidity, high or low temperature, or used in a closed room (space).
3. The air inlet of the oxygen generator (above the rear shell of the machine) should be well ventilated.
4. Keep the oxygen generator stable, otherwise it will increase the noise during operation.
5. It is forbidden to lay on the oxygen generator.
6. The oxygen generator uses 220-240V (+ 5 / -10V), 50 ± 1Hz single-phase AC power. If the grid voltage is
unstable, it will affect the normal startup of the compressor. Please install a voltage stabilizer.
7. Before using the oxygen generator, you must loosen (or withdraw) the Velcro strap under the fuselage.
