JVC KD-G541 Manuale utente
ENGLISH
CD RECEIVER
KD-G541
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0495-003A
[EX/EU]
For canceling the display demonstration, see page 5.
2
ENGLISH
Warning:
If you need to operate the unit while driving, be
sure to look around carefully or you may be involved
in a traffic accident.
Information for Users on Disposal of Old
Equipment
This symbol indicates that the product with
this symbol should not be disposed as general
household waste at its end-of-life. If you wish to
dispose of this product, please do so in accordance
with applicable national legislation or other rules in
your country and municipality. By disposing of this
product correctly, you will help to conserve natural
resources and will help prevent potential negative
effects on the environment and human health.
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
Note: Only for [EX] model users in U and
European countries
or security reasons, a numbered ID card is provided
with this unit, and the same ID number is imprinted on
the unit’s chassis. Keep the card in a safe place, as it will
help the authorities to identify your unit if stolen.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION O LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
This symbol is only valid in
the European Union.
EN02-07_KD-G541_003A_f.indd 2EN02-07_KD-G541_003A_f.indd 2 11/13/07 2:31:30 PM11/13/07 2:31:30 PM
ENGLISH
3
How to reset your unit
• Your preset adjustments will also be erased (except the
registered Bluetooth device, see page 16).
How to forcibly eject a disc
“PLEASE” and “EJECT” appear alternately on the display.
• Be careful not to drop the disc when it ejects.
• f this does not work, reset your unit.
How to use the M MODE button
If you press M MODE, the unit goes into functions mode,
then the number buttons and 5/∞ buttons will work
as different function buttons.
Ex.: When number button 2 works as MO (monaural)
button.
To use these buttons for their original functions,
press M MODE again.
• Waiting for about 5 seconds without pressing any
of these buttons will automatically exit from the
functions mode.
CONTENTS
Control panel .................................. 4
Getting started ................................ 5
Basic operations ................................................... 5
Radio operations ............................. 6
FM RDS operations ........................... 7
Searching for your favorite M RDS
programme .................................................. 7
Disc operations ................................ 9
Playing a disc in the unit ..................................... 9
Playing discs in the CD changer ............................ 10
Sound adjustments .......................... 12
General settings — PSM .................. 13
Using the Bluetooth ® devices ........... 16
Using the Bluetooth cellular phone ..................... 17
Using the Bluetooth audio player ......................... 19
Bluetooth settings ............................................... 19
DAB tuner operations ....................... 20
iPod operations ............................... 22
Other external component
operations ................................... 23
Remote controller — RM-R 50 ........... 24
Maintenance ................................... 26
More about this unit ........................ 27
Troubleshooting .............................. 31
Specifications .................................. 34
or detaching/attaching the control panel see
page 30.
This unit is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual (separate
volume) for connection.
EN02-07_KD-G541_003A_f.indd 3EN02-07_KD-G541_003A_f.indd 3 11/13/07 2:31:33 PM11/13/07 2:31:33 PM
4
ENGLISH
Parts identification
Display window
Control panel
1 4 / ¢ buttons
2 (standby/on/attenuator) button
3 5(up)/∞(down) buttons
4 Source button / Control dial
5 Display window
6 T/P (traffic programme/programme type) button
7 OPEN button
• To flip-open the control panel.
• To eject the disc, flip-open the control panel then
press 0 on the unit.
8 SEL (select) button
9 EQ (equalizer) button
p MO (monaural) button
q SSM (Strong-station Sequential Memory) button
w Number buttons
e RPT (repeat) button
r RND (random) button
t M MODE button
y DISP (display) button
u BAND button
i Remote sensor
• You can control this unit with an optionally
purchased remote controller. or details, see
pages 24 and 25.
• DO NOT expose the remote sensor to strong light
(direct sunlight or artificial lighting).
o AUX (auxiliary) input jack
; Status of Bluetooth device
(Device number, [1 – 5]; signal strength, [0 – 3]*;
battery reminder, [0 – 3]*)
* As the number increases, the signal/battery
strength becomes stronger.
a Tr (track) indicator
s Source display / Track number / older number /
Time countdown indicator
d Auxiliary indicator
f iPod indicator
g LOUD (loudness) indicator
EN02-07_KD-G541_003A_f.indd 4EN02-07_KD-G541_003A_f.indd 4 11/13/07 2:31:34 PM11/13/07 2:31:34 PM
ENGLISH
5
h Sound mode (iEQ: intelligent equalizer)
indicators—CLASSIC, HIP HOP, JAZZ, ROCK, POPS,
USER
j EQ (equalizer) indicator
k Bluetooth indicator
l Disc information indicators—
TAG (Tag information), (folder), (track/file)
/ Playback source indicators—
DISC: Lights up for the built-in CD player.
CH: Lights up only when CD-CH is selected as the
playback source.
z RDS indicators—A , REG, TP, PTY
Main display
c Playback mode / item indicators—RND (random),
(disc), (folder), RPT (repeat)
v Tuner reception indicators—ST (stereo),
MO (monaural)
Getting started
Basic operations
~ Turn on the power.
Ÿ
FM1/FM2/FM3/AM = DAB1/DAB2/DAB3 *
= CD * = CD-CH */IPOD * (or EXT IN) =
BT-PHONE * (Bluetooth Phone) = BT-AUDIO *
(Bluetooth Audio) = AUX IN = (back to the
beginning)
* You cannot select these sources if they are not
ready or not connected.
!
• For FM/AM tuner
• For DAB tuner
⁄ Adjust the volume.
@ Adjust the sound as you want. (See
pages 12 and 13.)
To drop the volume in a
moment (ATT)
To restore the sound, press the
button again.
To turn off the power
Basic settings
• See also “General settings — PSM” on
pages 13 – 15.
1
2
1 Canceling the display demonstrations
Select “DEMO,” then “DEMO O .”
2 Setting the clock
Select “CLOCK HOUR”, then adjust the hour.
Select “CLOCK MIN” (minute), then adjust the
minute.
Select “24H/12H,” then “24 HOUR” or
“12 HOUR.”
Volume level appears.
Continued on the next page
EN02-07_KD-G541_003A_f.indd 5EN02-07_KD-G541_003A_f.indd 5 11/13/07 2:31:35 PM11/13/07 2:31:35 PM
6
ENGLISH
3 Finish the procedure.
To check the current clock time while the
power is turned off
Clock time is shown on the display for
about 5 seconds. See also page 14.
Radio operations
~
Ÿ
! Start searching for a station.
When a station is received, searching stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! on the left column...
1
2 Select a desired station frequency.
When an FM stereo broadcast is hard to
receive
Reception improves, but the stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. “MONO O ” appears and the MO indicator
goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you want to
store into.
2
Lights up when receiving an M stereo
broadcast with sufficient signal strength.
Lights up when monaural mode is activated.
EN02-07_KD-G541_003A_f.indd 6EN02-07_KD-G541_003A_f.indd 6 11/13/07 2:31:36 PM11/13/07 2:31:36 PM
ENGLISH
7
3
“SSM” flashes, then disappears when automatic
presetting is over.
Local M stations with the strongest signals are
searched and stored automatically in the M band.
Manual presetting
Ex.: Storing the M station of 92.50MHz into preset
number 4 of the M1 band.
1
2
3
Listening to a preset station
1
2 Select the preset station (1 – 6) you want.
To check the current clock time while
listening to an FM (non-RDS) or AM station
• or M RDS stations, see page 9.
FM RDS operations
What you can do with RDS
RDS (Radio Data System) allows M stations to send an
additional signal along with their regular programme
signals.
By receiving the RDS data, this unit can do the
following:
• Programme Type (PTY) Search (see the following)
• TA (Traffic Announcement) and PTY Standby
Receptions (see pages 8, 9, and 14)
• Tracing the same programme automatically
—Network-Tracking Reception (see page 9)
• Programme Search (see pages 9 and 14)
Searching for your favorite
FM RDS programme
You can tune in to a station broadcasting your favorite
programme by searching for a PTY code.
• To store your favorite programme types, see page 8.
~
The last selected PTY code appears.
Ÿ Select one of your favorite programme
types.
or
Select one of the PTY codes (see
page 9).
Preset number flashes for a while.
Frequency Ô Clock
Continued on the next page
EN02-07_KD-G541_003A_f.indd 7EN02-07_KD-G541_003A_f.indd 7 11/13/07 2:31:37 PM11/13/07 2:31:37 PM
8
ENGLISH
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from any
source other than AM.
The volume changes to the preset TA volume level if the
current level is lower than the preset level (see
page 1 ).
To activate TA Standby Reception
The TP (Traffic Programme) indicator
either lights up or flashes.
• If the TP indicator lights up, TA Standby Reception is
activated.
• If the TP indicator flashes, TA Standby Reception is
not yet activated. (This occurs when you are listening
to an FM station without the RDS signals required for
TA Standby Reception.)
To activate TA Standby Reception, tune in to another
station providing these signals. The TP indicator will
stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite PTY programme from any
source other than AM.
To activate and select your favorite PTY code for
PTY Standby Reception, see page 1 .
The PTY indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby Reception
is activated.
• If the PTY indicator flashes, PTY Standby Reception is
not yet activated.
To activate PTY Standby Reception, tune in to another
station providing these signals. The PTY indicator will
stop flashing and remain lit.
! Start searching for your favorite
programme.
If there is a station broadcasting a programme
of the same PTY code as you have selected, that
station is tuned in.
Storing your favorite programme
types
You can store six favorite programme types.
Preset programme types in the number
buttons ( to 6):
1 Select a PTY code (see steps ~ to ! on
pages 7 and 8).
2 Select the preset number ( – 6) you want to
store into.
3 Repeat steps and 2 to store other PTY codes
into other preset numbers.
4 Finish the procedure.
ROCK M MEMORY
Ex.: When “ROCK M” is selected
EN08-15_KD-G541_003A_f.indd 8EN08-15_KD-G541_003A_f.indd 8 11/13/07 2:30:44 PM11/13/07 2:30:44 PM
9
ENGLISH
To check the current clock time while
listening to an FM RDS station
Station name (PS) = Station
Frequency = Programme type
(PTY) = Clock = (back to the
beginning)
PTY codes
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA,
CULTURE, SCIENCE, VARIED, POP M (music), ROCK M
(music), EASY M (music), LIGHT M (music), CLASSICS,
OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY,
NATION M (music), OLDIES, FOLK M (music), DOCUMENT
Disc operations
Playing a disc in the unit
The following marks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
All tracks will be played repeatedly until you change the
source or eject the disc.
To stop play and eject the disc
• Press SOURCE to listen to another playback source.
To deactivate the PTY Standby Reception, select
“OFF” for the PTY code (see page 1 ). The PTY indicator
goes off.
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in to
another FM RDS station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting, see “AF-REG” on page 1 .
Programme A broadcasting on different frequency
areas (01 – 05)
Automatic station selection—
Programme Search
Usually when you press the number buttons, the preset
station is tuned in.
If the signals from the FM RDS preset station are not
sufficient for good reception, this unit, using the AF
data, tunes in to another frequency broadcasting the
same programme as the original preset station is
broadcasting.
• The unit takes some time to tune in to another
station using programme search.
• See also page 1 .
EN08-15_KD-G541_003A_f.indd 9EN08-15_KD-G541_003A_f.indd 9 11/13/07 2:30:48 PM11/13/07 2:30:48 PM
10
ENGLISH
Playing discs in the CD changer
All discs in the magazine will be played repeatedly until
you change the source.
• Ejecting the magazine will also stop playback.
~
* If you have changed the external input setting
to “EXT INPUT” (see page 1 ), you cannot select
the CD changer.
Ÿ Select a disc.
For disc number from 01 – 06:
For disc number from 07 – 12:
About the CD changer
It is recommended to use a JVC MP3-compatible CD
changer with your unit.
• You can also connect MP3-incompatible CD changers.
However, these units are not compatible with MP3
discs.
• You cannot use the CH-X99, CH-X100, and KD-MK
series CD changers with this unit.
• You cannot play any WMA disc in the CD changer.
• Disc text information recorded in the CD Text can be
displayed when a JVC CD Text compatible CD changer
is connected.
• For connection, see Installation/Connection Manual
(separate volume).
To fast-forward or reverse the track
To go to the next or previous tracks
To go to the next or previous folders (only for
MP3 or WMA discs)
For MP3 discs:
For WMA discs:
To locate a particular track (for CD) or folder
(for MP3 or WMA discs) directly
To select a number from 01 – 06:
To select a number from 07 – 12:
• To use direct folder access on MP3/WMA discs, it
is required that folders are assigned with 2-digit
numbers at the beginning of their folder names—
01, 02, 03, and so on.
To select a particular track in a
folder (for MP3 or WMA disc):
EN08-15_KD-G541_003A_f.indd 10EN08-15_KD-G541_003A_f.indd 10 11/13/07 2:30:49 PM11/13/07 2:30:49 PM
Altri manuali per KD-G541
2
Indice
Altri manuali JVC Ricevitore per auto
JVC
JVC KD-AVX2 - DVD Player With LCD Monitor Guida
JVC
JVC KD-S757R Foglio di istruzioni
JVC
JVC GET0665-001A Manuale utente
JVC
JVC KS-FX8 Manuale utente
JVC
JVC KD-S5055 Manuale utente
JVC
JVC KS-FX470 Manuale utente
JVC
JVC KD-G489UR Manuale utente
JVC
JVC KW-XC404 Guida
JVC
JVC KD-R646 Manuale utente
JVC
JVC KD-S31 Manuale utente
