KOGEL.CC USA: +1 915 777 5666 info@kogel.cc
INSTALLING BSA-DUB SLEEVE
BSA-DUB SLEEVE: INSTALLATION MANUAL
KOGEL.CC USA: +1 915 777 5666 info@kogel.cc
3. INSTALL THE RIGHT SIDE CUP FIRST:
Push the red side of the sleeve into the right side cup and thread in the cup as normal. Torque it to 40Nm
4. CHECK FOR ALIGNMENT:
This is the step where you potentially will crush the sleeve if you do not follow the guidelines.. Proceed with caution!
Before installing the left side cup, have a good look inside the bottom bracket shell and make sure the sleeve is perfectly centered.
Internal hoses can push the sleeve out of alignment during installation. If the sleeve looks crooked, just grab it with your fingers and
push it towards the right side cup until it bottoms out on the stopper. You should see an equal amount of space around the entire
circumference of the sleeve and inside the threaded BB shell.
Once the sleeve is centered, you can thread in the left side cup and torque it to 40Nm.
Have a last look inside the bottom bracket to see if everything lined up correctly and install your crankset according to the
manufacturer instructions.
