23
INtRoductIoN:
This manual contains information to help you to learn about the safe and proper use of the KL30200
10,000lb Load Leveler. The instructions included in this manual are not necessarily all-inclusive. K-Line®
cannot anticipate all conceivable or unique situations. You must make sure all conditions and procedures
do not jeopardize your personal safety.
DISCLAIMER: All information, images, and specifcations contained in this manual are based on the
latest information available at the time of publication. K-Line® reserves the right to make changes at
any time without notifying any person or organization of such revisions or changes. K-Line® is not
liable for incidental or consequential damages (including lost prots) in connection with the furnishing,
performance, or use of this material. If necessary, obtain additional information from the component
manufacturer.
sAfety pRecAutIoNs:
Before using the KL30200 10,000lb Load Leveler, read, understand, and follow the safety precau-
tions and operating instructions outlined in this manual. This equipment must be operated by quali-
ed personnel. The operator must also be familiar with the component this tool is being used to lift.
ÂIf the operator cannot read English, operating instructions and safety precautions must be read and
discussed in the operator’s native language.
ÂSi el operador no puede leer inglés, las instrucciones de operación y las precauciones de seguridad
deberán leerse y comentarse en el idioma nativo del operador.
ÂSi l’utilisateur ne peut lire l’anglais, les instructions et les consignes de sécurité doivent lui être
expliquées dans sa langue maternelle.
Personal Protection/imPortant information
WARNING
Fire/Smoking Hazard:
Clean up all leaked
or spilled uids
immediately. Oil, fuel,
or cleaning uid leaked
or spilled onto any hot surfaces or electrical
components can cause a re, resulting in personal
injury or death.
Slip & Fall Hazard:
Personal injury can
result from slips or falls.
DO NOT leave tools or
components laying around the work area. Clean
up all spilled uids immediately.
Prohibited action
WARNING
To avoid serious or fatal injury, only
use the KL30200 10,000lb Load
Leveler for its intended purpose,
which is lifting components into
position for installation and removal. Attach BOTH
arms to the load being lifted; do NOT use a single
arm setup.
To avoid serious or fatal injury, do
not exceed the Working Load Limit
(WLL) of 10,000lbs (4536kg) for any
component being supported by the
KL30200 10,000lb Load Leveler.
WARNING
hazard avoidance
Additional Crushing
Hazard: Personal injury
or death can result from
improper use of this tool
and supporting of the
component. Ensure the KL30200 10,000lb Load
Leveler is securely attached to the component
before removing any hardware. Do not work
beneath any supported tool.
To avoid damage to the tooling, do
not weld on the components. Do not
modify the KL30200 10,000lb Load
Leveler in any way by welding, heating
with a torch, drilling, machining, or grinding.
Personal Protection/imPortant information
Eye & Face Protection: To
avoid eye injury, always
wear protective glasses
or face shield. Make sure
no one can be injured by ying objects or debris
when using tools or working on a component.
Read the Manual: To avoid personal
injury or death, carefully read and
understand all instructions before
attempting to operate any equipment
or tools. Do not operate or work on a machine
unless you read and understand the instructions
and warnings in this and all other applicable
manuals.
WARNING
Ear Protection: To prevent possible
damage to your hearing, always wear
ear protection when working around
noise generating tools.
WARNING
hazard avoidance
Crushing Hazard: The
complete KL30200
10,000lb Load Leveler
weighs approximately
95 lbs (43kg). Personal injury can result from
dropped tooling. Use caution when transporting,
installing, removing, and storing the tooling.
Inspect Equipment: Inspect prior
to each use for dents, cracks, bends,
or worn parts. If damage is found,
discontinue use until inspected and
released by an approved inspector at
the dealership.
Pinch Point Hazard: Personal injury
can result from pinch points. Use
caution when assembling, installing,
and removing the KL30200. To
avoid serious injury, DO NOT place
your hand or any part of your body between the
KL30200 Load Leveler and it’s components.
objectIve:
The KL30200 10,000lb Load Leveler is designed to be a safe and eective tool to handle and position
large, bulky components. The horizontal tilt can be adjusted to compensate for o-center loads or
adjusted to a certain angle for a component being positioned. Please take a few minutes to review this
user’s guide in order to familiarize yourself with all of the included components of the 10,000lb Load
Leveler Instruction Procedures and Safety Warnings.
