EWIF 457.1 15
Cleaning and Care
You should care ully read this chapter be ore you use your appliance the irst
time. I cleaned correctly and looked a ter regularly the appliance will remain
beauti ul and clean or many years.
[Sugar and ood containing sugar (e. g. marmalade) and melted plastic
must immediately be removed with the cleaning scraper rom the hot
cooking sur ace otherwise the sur ace can be destroyed when cooling
down.
[Do not, under any circumstances, use steam or pressure cleaning
machines to clean the appliance! Damage caused to your appliance by
cleaning it this way can make it lethally dangerous.
[Risk of burning! Make sure the appliance has cooled down be ore
cleaning.
[Please ollow the instructions provided with the cleaning agents you plan
to use.
FResidues o cleaning agents can cause discolouring the next time you
switch it on. Cloths and sponges which are used or the cleaning o other
sur aces can cause discolouring.
FCleaning the glass ceramic sur aces with a cleaning agent protects them
o discolouring, and reduces the danger o damage through sugar and o ten
can remove discolouring or stains.
Clean the oven each time you use it.
First remove heavy dirt and ood residues with the cleaning scraper when the
cooking sur ace is still warm.
Dirt le t will burn into the sur ace next time you use it. These burned on
residues can sometimes be impossible to remove completely.
To clean an oven that is not very dirty, use a damp cloth, a so t brush or a
so t sponge and a weak solution o detergent and warm water. Always rinse
the sur aces with cold water to remove all traces o detergent. Detergent
residues can cause discoloration and blotches. Wipe dry a terwards.
FVSR O-FIX-C is per ect or the cleaning o glass ceramic. This cleaning
powder is available rom KÜPPERSBUSCH Customer service.
Do not use any
- aggressive or bleaching cleaning agents containing or example active
oxygen, chlorine or corrosive components.
- abrasive cleaning or scouring agents, such as steel wool, soap-impregnated
steel wool, sti brushes, metal or plastic sponges or any similar cleaners
with an abrasive sur ace.
Removing at and grease deposits
First, soak any heavy deposits to loosen them. A wet cloth is ideal. This will
make them easier to remove later.
In ormation about the cleaning scraper
[Caution! Risk o cutting! The blade o the cleaning scraper is very sharp!
Always hold the cleaning scraper lat to the sur ace
and push the grease away rom you
[Do not scratch the sur ace with the edge o
the scraper and take care not to damage the
sealing with the edge.
[Do not use the cleaning scraper in the bulge as otherwise it will scratch
the sur ace.
What to do if trouble occurs
[Repairs must be carried out by a quali ied service engineer!
But there are some problems that you can ix yoursel . You should irst check
that you are using the oven correctly. Repairs during the guarantee period are
chargeable, i they are caused by user error or non-observance o the ollowing
instructions:
What is to be done if…
... one sensor or more does not react to touching?
Possible cause: The sensors constantly adapt in sensitivity to ambient
conditions. Un avourable conditions such as e.g. i you lean against them
or a lengthy period, may cause then not to react or several minutes.
Wait for about 15 minutes or pull the relevant fuse and then re-insert it. Repeat this
procedure if necessary!
The keys have adapted and now react to touch again.
... one or more sensors don’t react to touch despite repeating this
procedure?
Possible cause: Faulty sensor key or component.
If you’ve repeated the procedure and the keys still don’t react, pull the fuse again
and then contact our Customer Service.
Model identification plate
Should you need to contact Customer service or order spare parts, always
quote the in ormation printed on the model identi ication plate. You can ind
these numbers on the rating label or on page 1 o the Operating Instructions
Fault Cause Remedy
Displays are dark,
wok does not become
hot.
Plug or household use
de ective ?
Check or replace plug or use.
Not possible to switch
o the appliance.
Electronic component
de ective.
Remove wok rom the hob
switch o the use, call
Customer service.
LED display or cooking
setting does not come
on or only partially.
LED display de ective. Call Customer service.
Risk o burning, as the
temperature warning is not
guaranteed.
Flashing o the cooking
setting display.
Overheating o the
electronics
Wait until hob cools down.
in the display, wok
does not become hot.
Unsuitable wok, pan
recognition has blocked the
hob.
Use only KÜPPERSBUSCH acc.
No. 760 oder 761.
See “The induction hob“ on
page 13.
Wok does not become
hot.
Sensor-lock not
deactivated?
Deactivate sensor-lock.
See page 14.
Cooling o the induction
element overloaded -
Flashing o the cooking
setting display
Allow appliance to cool down.
I this occurs more requently
wrong installation – call
Customer Service.
E in the display. Electronics error Call Customer service.
Sensors do not react to
touch.
Pots, wet cleaning cloths
etc. in control area.
Clear away, clean and dry the
glass in the control area.
Sensors have change their
setting o sensitivity.
(See ”„What is to be done i …“
in this chapter.
