KERN ODC-87 Manuale utente

Questo manuale è adatto per i seguenti modelli

4

Indice

Manuali Microscopio popolari di altre marche

Thermo Scientific

Thermo Scientific Nicolet iN10 Guida

National

National DC3-163 Manuale utente

KERN Optics

KERN Optics OPE-1 Manuale utente

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuale utente

Prior

Prior Lux POL Manuale utente

Opitec

Opitec Smartscoop 115615 Manuale utente

Topcon

Topcon SP-1P Manuale utente

Motic

Motic PA43 Manuale utente

Leica

Leica DVM5000 Guida utente

MshOt

MshOt MZ62 Manuale utente

KERN Optics

KERN Optics OZR-5 Manuale utente

VWR

VWR VisiScope 384 Series Manuale utente

Nikon

Nikon ECLIPSE E200 POL Manuale utente

Leica

Leica DI C800 Manuale

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

Olympus

Olympus SZ61 Manuale utente

Leica

Leica FL560 Manuale utente

ODC-87_88-BA-e-1610

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Tel: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

User instructions

Microscope camera

(eye piece camera)

KERN

ODC-87, ODC-88

ODC 872, ODC 874

ODC 881

Version 1.0

01/2016

2

ODC-87_88-BA-e-1610

KERN ODC-87, ODC-88

Version 1.0 01/2016

User instructions

Microscope camera

Before use

You should ensure that the device is not exposed to direct sunlight, temperatures which

are too high or too low, vibrations, dust or a high level of humidity.

The ideal temperature range is between 0 and 40°C and a relative humidity of 85%

should not be exceeded.

Always make sure that you use an approved power cable. Thus possible damages by

reason of the development of overheating (fire hazard) or an electric shock can be

prevented.

Do not open the housing and touch the internal component. There is the risk of

damaging them and affecting the functionality of the camera.

In order to carry out cleanings always disconnect the power cable from the camera.

Always keep the sensor clear from dust and do not touch it. Otherwise there is the risk

of affecting the microscopic image. In case of non-use always attach the protective

covers.

Technical data

Model

KERN

Resolution

Interface

Sensor

Frame rate

Colour /

Monochrome

Supported operating

systems

ODC 872

1,3 MP

USB 2.0

1/3“CMOS

7,5 –12,5 fps

Colour

Win, XP, Vista, 7, 8, 10

ODC 874

3,1 MP

USB 2.0

1/2,7“CMOS

3 –7,5 fps

Colour

Win, XP, Vista, 7, 8, 10

ODC 881

5,1 MP

USB 3.0

1/2,5“ CMOS

15 -30 fps

Colour

Win, XP, Vista, 7, 8, 10

GB

ODC-87_88-BA-e-1610

3

Scope of delivery

- Microscope camera

- USB cable

- Object micrometre for calibration

- Software CD

- Adjustment rings (Ø30.0 mm + Ø30.5 mm) for eyepiece adapter

Mounting

1. Remove the black cover at the bottom of the camera.

2. The round connecting piece, where the cover was attached, has a

standardised diameter (Ø 23.2 mm). Thus the camera suites all

microscopes of which the eyepieces have this standard size.

3. For the mounting to the microscope one of the eyepieces needs to

be removed from the microscope tube and replaced by the

eyepiece camera.

Important:

For microscopes, that have a different eyepiece diameter (30.0

mm or 30.5 mm, mostly used for stereo microscopes), you need

to apply the appropriate adjustment ring in order to mount the

eyepiece camera correctly.

4. If necessary, adjust the microscope according to the trinocular

usage (with help of the trino toggle rod / trino toggle wheel).

PC connection

1. Establish USB connection via USB cable.

2. Installing the software with help of the CD.

Detailed instructions can be found in the supplied "readme"-file.

3. Both the supplied "Help"-files and the software-internal "User

Guide" include all information and instructions about the operation

of the software or of digital microscopy.