KERN ODC-89 Series Manuale utente
2
ODC-89-BA-e-1610
KERN ODC-89
Version 1.0 01/2016
User instructions
USB microscope
Before use
You should ensure that the device is not exposed to direct sunlight, temperatures which
are too high or too low, vibrations, dust or a high level of humidity.
The ideal temperature range is between 0 and 40°C and a relative humidity of 85%
should not be exceeded.
Always make sure that you use an approved power cable. Thus possible damages by
reason of the development of overheating (fire hazard) or an electric shock can be
prevented.
Do not open the housing and touch the internal component. There is the risk of damaging
them and affecting the functionality of the camera.
In order to carry out cleanings always disconnect the power cable from the mains supply.
Always keep the sensor clear from dust and do not touch it. Therefore do not remove its
protective housing. Otherwise there is the risk of affecting the microscopic image. In case
of non-use always attach the protective covers.
Technical data
Model
KERN
Resolution
Interface
Sensor
Frame rate
Colour /
Monochrome
Supported operating
systems
ODC 894
2 MP
USB 2.0
1/3,2“CMOS
15 - 30 fps
Colour
Win, XP, Vista, 7, 8, 10
ODC 895
2 MP
USB 2.0
1/3,2“ CMOS
15 - 30 fps
Colour
Win, XP, Vista, 7, 8, 10
Model
KERN
Magnification
levels
Focusing stand
Illumination
ODC 894
10x, 200x
Coaxial
8x LED
ODC 895
10x, 200x
Focus wheel
8x LED
GB
ODC-89-BA-e-1610
3
Scope of delivery
- USB microscope (USB cable incl.)
- Microscope stand
- Software CD
Mounting + functionalities
1. Remove the cover at the bottom of the microscope.
2. Mount the microscope stand and put it onto an even table
surface. Afterwards attach the microscope on the ring holder of
the stand.
3. Establish USB connection to a PC via USB cable.
4. Installing the software with help of the CD.
Detailed instructions can be found in the supplied "readme"-file.
5. Both the supplied "Help"-files and the software-internal "User
Guide" include all information and instructions about the
operation of the software or of digital microscopy.
6. As soon as the software has been started and the image
transmission launched, adjust the illumination level by using the
control wheel, located on the cable.
7. The adjustment of the magnification level is done by using of the
control wheel, located on the side of the microscope.
8. The height adjustment of the microscope stand is done by using
the focus wheels. For the KERN ODC 894 it is aligned coaxial
and for the KERN ODC 895 double-sided on the stand pillar.
9. The USB microscope can also be used without microscope
stand. It can be easily directed towards the specimen by hand.
10. For capturing a snapshot the knob, located on the side of the
microscope (above the control wheel for the magnification
adjustment), needs to be pressed.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali KERN Microscopio
KERN
KERN OLE-1 Manuale utente
KERN
KERN OZC-5 Manuale utente
KERN
KERN OZO 551 Manuale utente
KERN
KERN OPTICS OKO-1 Manuale utente
KERN
KERN OLM-1 Manuale utente
KERN
KERN OZL 441 Manuale utente
KERN
KERN OBL-14 Manuale utente
KERN
KERN OSF 522 Manuale utente
KERN
KERN OPO-1 Manuale utente
KERN
KERN OZM-9 Series Manuale utente
KERN
KERN OSF-4 Manuale utente
KERN
KERN OZG 497 Manuale utente
KERN
KERN OSE-4 Series Manuale utente
KERN
KERN OBN-14 Manuale utente
KERN
KERN OBN-15 Manuale utente
KERN
KERN OBS-1 Manuale utente
KERN
KERN OZL-45 Manuale utente
KERN
KERN OIV-3 Manuale utente
KERN
KERN ODC-87 Manuale utente
KERN
KERN OZM 902(UK) Manuale utente
