Keychron K6 Manuale utente
K6 Bluetooth Mechanical
Keyboard
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 - 20
Čeština
21 –38
Slovenčina
39 –56
Magyar
57 –75
Deutsch
76 - 93
3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
In the box
Keychron K4 Bluetooth Mechanical Keyboard x 1
Type-C Cable * 1
Manual * 1
Quick Start Guide * 1
Extra Keycaps Set * 1
Quick start guide
If you are a Windows user, please find the appropriate keycaps in the box, then follow
the instructions below to find and replace the following keycaps.
5
Connect Bluetooth
Switch toggle to Bluetooth
Press fn + Q (for 4 seconds) and pair with device named Keychron K6
Connect Cable
6
Change the light effect key
Press the light effect key
For RGB version –Press fn + right arrow / left arrow to change colour
Switch toggle to Cable
7
Switch Between function and Multimedia Keys (F1 –F12)
For Windows: Press fn+ X+ L (for 4 seconds) to switch
Multimedia keys
F1 –F12
Function Keys
For mac: Go system settings > Keyboard > and enable the function keys.
*For F5 and F6 as function keys press fn + K + C (for 3 seconds) and use the same
shortcut to switch.
Use F1, F2 keys as standard
function keys
When this option is selected, press
the Fn key to use the special
features printed on each key.
Settings
Keyboard
Enable function keys
Disable Auto Sleep Mode
The keyboard goes to Auto Sleep Mode in 10 minutes of sitting idle to save battery
8
Press fn + S + O (for 4 seconds) to disable the Auto Sleep Mode. (If you want to go back
to the Auto Sleep mode, press fn + S + O for 4 seconds again)
Remap Keys
We don’t have an official software to remap the keys yet. But you can use this two
software to get the job done. (Except the light effect key):
For Mac –Karbiner and for Windows –SharpKeys
We have Linux user group on Facebook. Please search “Keychron Linux Group” on
Facebook. So, you can better experience with our keyboard.
9
Turn Off the Backlight
In oreder to turn up the brightness of the backlight, you need to press fn1 +
In oreder to turn down the brightness of the backlight, you need to press fn1 +
Or press the Fn1 + Light effect key to quick turn on and off the backlight
Switch Between The Right Control Key and The Right Alt Key
in Windows
10
Press fn1+K+R (For 4 seconds) to switch between these two layouts.
The default is right control in Windows.
Press fn1 + CTRL to acces the right Alt
Key.
After switching the layout, you will get
right Alt in Windows.
Press fn1+Alt to access the right control
key.
Lock the light effect
Press fn1 + L + Light effect key for 4 seconds to lock the light effect. Press this key
combination again to unlock it.
Factory Reset
Trouble shooting? Don’t know what’s going on with the keyboard? Try factory reset by
pressing fn +J +Z（for 4 seconds)
Indice
Lingue:
Altri manuali Keychron Tastiera
Keychron
Keychron K1 Max Manuale utente
Keychron
Keychron C2 Manuale utente
Keychron
Keychron C1 Manuale utente
Keychron
Keychron K2 Manuale utente
Keychron
Keychron K2 Manuale utente
Keychron
Keychron K12 Manuale utente
Keychron
Keychron K!1 Manuale utente
Keychron
Keychron Q3 Manuale utente
Keychron
Keychron K2 Manuale utente
Keychron
Keychron K8 Manuale utente
Keychron
Keychron Q0 Manuale utente
Keychron
Keychron K7 Manuale utente
Keychron
Keychron K4 Manuale utente
Keychron
Keychron K2 Manuale utente
Keychron
Keychron C3 Pro Manuale utente
Keychron
Keychron K7 Manuale utente
Keychron
Keychron Q1 Manuale utente
Keychron
Keychron K11 Pro Manuale utente
Keychron
Keychron C2 Manuale utente
Keychron
Keychron C3 Pro Manuale utente
