KHIND SF2003F Manuale utente
20”Industrial Stand & Wall Fan / 20" 工业立扇 / Kipas Berdiri dan Dinding Industri 20”
P/N: 40-51513-00
Please read this manual carefully before operating this product. Keep this manual handy for further reference.
请在使用此产品前,详读此说明书。并将之收藏以作日后参考。
Sila baca buku panduan ini dengan teliti sebelum menggunakan produk ini. Simpanlah untuk rujukan masa depan.
Important / 重要 / Mustahak
model / 型号
SF2003F / WF2003F
Instruction Manual / 说明指示书/Buku Panduan
Kipas Berdiri
1. Sambungan kipas dengan punca kuasa dengan bekalan kuasa 240V~ 50Hz. Kemudian pilih
kelajuan (1, 2 atau 3) yang dikehendaki dengan memusingkan tombol kelajuan pada panel
penutup motor belakang.
2. Tekan atau tarik Tombol Ayunan untuk memulakan atau menghentikan ayunan kipas.
3. Untuk melaraskan sudut tegak, tutup kipas dan condongkan kipas ke atas atau ke bawah seperti
arah yang dikehendaki.
Kipas Dinding
1. Pasangkan kipas ke bekalan kuasa 240V~ 50Hz. Anda boleh mengawal kipas dinding anda dengan
tali penarik.
2. Untuk menghidupkan kipas "ON", tarik tali KANAN. Pada permulaan, kipas akan beroperasi pada
kelajuan rendah. Tarik tali yang sama beberapa kali untuk mencapai kelajuan kipas yang diingini.
3. Tarik tali KIRI untuk menghidupkan mod ayunan.
4. Untuk menyesuaikan sudut menegak, matikan peralatan dan condongkan ke atas atau ke bawah
seperti diinginkan.
1. Ensure that the fan is switched o from the supply mains before removing the fan guard for cleaning.
2. Use this fan with specied voltage as stated on the rating sticker. Before connecting fan to the AC mains,
make sure the voltage specied corresponds to the AC supply to your house.
3. Do not insert nger or other objects into the fan guard.
4. Do not attempt to repair the fan. Always return to our authorised service agents for repairs.
5. Do not immerse the motor assembly or any parts of the fan inside the water or other liquids.
6. Do not use the appliance outdoors or near windows. Rain drops may cause electrical hazards.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
8. Do not operate this appliance without a fan blade, broken or bent fan blade.
9. Handle fan blade with care during cleaning.
10. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
11. The ventilation holes of rear motor cover must be free of dust & dirt. Please use a soft cloth or vacuum
cleaner to clean it frequently.
12. Ensure that the fan is switched o from the supply
mains before removing the guard.
Note:
For wall fan, Ensure that the fan is xed at a height
that is more than 2.5m from the oor.
1. Keep the fan clean. Use it in dry place.
2. Do not bend the blades when installing & maintaining.
3. Wipe away dirt with clean soft cloth, soap & water to clean the fan. Wipe until dry.
4. Do not use the following as cleaning solvents: petrol, thinner or benzene for cleaning.
5. Use mild soap with damp cloth or sponge to clean the plastic parts.
Safety and Warning Information
Safety Precaution Information
WARNING
Cleaning & Maintenance
21
1. Ensure that the fan is switched o from the supply mains before removing the fan guard for cleaning.
2. Use this fan with specied voltage as stated on the rating sticker. Before connecting fan to the AC mains,
make sure the voltage specied corresponds to the AC supply to your house.
3. Do not insert nger or other objects into the fan guard.
4. Do not attempt to repair the fan. Always return to our authorised service agents for repairs.
5. Do not immerse the motor assembly or any parts of the fan inside the water or other liquids.
6. Do not use the appliance outdoors or near windows. Rain drops may cause electrical hazards.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
8. Do not operate this appliance without a fan blade, broken or bent fan blade.
9. Handle fan blade with care during cleaning.
10. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
11. The ventilation holes of rear motor cover must be free of dust & dirt. Please use a soft cloth or vacuum
cleaner to clean it frequently.
12. Ensure that the fan is switched o from the supply
mains before removing the guard.
Note:
For wall fan, Ensure that the fan is xed at a height
that is more than 2.5m from the oor.
Parts Identication
2
5
67
8910
16
17
1
11
13
15
14
12
18
19
3
4
1. Front Guard Ornament
2. Front Guard
3. Guard Ring
4. Guard Ring Screw Cover/Clip
5. Fan Blade
6. Blade Screw
7. Rear Guard
8. Rear Guard Screws
9. Motor Body
10. Oscillation Knob
11. Speed Selector Knob
12. Bolt
13. Power Cord
14. Extension Pole
SF2003F
WF2003F
21
15. Height Adjustable Lock
16. Upright (Stand) Pole
17. Base
18. Base Weight
19. Base Washer & Lock Nut
1. Front Guard Ornament
2. Front Guard
3. Guard Ring
4. Guard Ring Screw Cover/Clip
5. Fan Blade
6. Blade Screw
7. Rear Guard
8. Rear Guard Lock
9. Motor Body
10. Power Cord
11. Fan Body
12. Speed Selector Knob
13. Speed Pull String
2
5
67
89
1
12
13
10
11
3
4
3
Specications
Model
Voltage
Power
Fan Blade Size
Fan Blade Type
Speed (rpm) /
Air Delivery
Eective Area
Net Weight
Product Dimenstion
SF2003F WF2003F
240V~ 50Hz
130W
20”
Aluminium
1350 rpm
980 rpm
120m3/min ; 4237CFM
70m2
8.8kg
560 x 490 x (1060~1330)mm
5.1kg
560 x 380 x 660mm
High Speed
Low Speed
*Specications are subject to change without prior notice.
Installation Guide
Install the base
1.
Tighten by base screw
3.
Adjust height using height
adjustment lock.
Put rear fan guard on motor
4. 5. 6.
Fixing the fan clip with front guard
7.
2.
Screw the rear fan guard Screw the fan blade. Tighten the
blade xing screw rmly.
SF2003F
4
34
Installation Guide
Hold the front guard with logo in upright position
and attached it to the rear guard
9.
Secure the two guards by
fastening the clips
8.
WF2003F
Fixing the fan clip with front guard
5.
Put Rear Fan Guard on Motor
1. 3.
Tighten the rear fan guard lock Screw the fan blade. Tighten the
blade xing screw rmly
Hold the front guard with logo in upright position
and attached it to the rear guard
6.
Secure the two guards by
fastening the clips
2.
4.
WF2003F
6
5
Installation Guide
7. 8. 9.
Operating Instruction
Stand Fan
1. Plug the fan to a 240V~ 50Hz power supply. Select the desired speed (1, 2 or 3) by turning the speed
selector knob on the side of motor cover panel.
2. Press or lift the Oscillation Knob to start or stop fan oscillation.
3. To adjust vertical angle, switch o the appliance and tilt angle up or down as needed.
Wall Fan
1. Plug the fan to 240V~ 50Hz power supply. You can control your wall fan with the pull stings.
2. To switch the fan “ON” by pulling the RIGHT string. At rst start-up, the fan will operate at low speed. Pull the
same string a couple of times to reach desired fan speed.
3. Pull on the LEFT string to switch on the oscillation mode.
4. To adjust vertical angle, switch o the appliance and tilt angle up or down as needed.
1. 在拆除护网进行清洗前，必须确保风扇已切断电源。
2. 请使用相同的电源如功率标贴所示。在还未将风扇连接至电源插座时，请确定功率标贴所示
的电源与里的电源规格一样。
3. 请勿将手指或其它物件插入风扇护网内。
4. 请勿尝试修理风扇。记得将风扇交回给我们的授权维修商修理。
5. 请勿把马达主体或任何风扇零件浸入水里或其它液体里。
6. 请勿在户外使用此扇。雨滴会导致触电危险事故发生。
7. 当电源线损坏时，请送往维修中心，所授权的维修中心或拥有同等技术的人士替换。
8. 不要在无扇叶的情况下操作此电器。避免使用损坏或弯曲的扇叶来操作此电器。
9. 清理风扇叶时，请小心以免损坏风扇叶。
10. 此电器不适合这些人士使用；小孩，体力弱及感官，精神上有障礙，缺少经验及知识者；
除非有人监督或指示如何操作，并负责操作人的安全。小孩需紧密的监督，
此电器严禁被小孩当玩具玩。
11. 马达后壳通风孔需时常保持清洁，
请用布或吸尘机清理灰尘。
12. 在卸下护网前，必须确保风扇已切断电源。
备注 :
安装壁扇时， 确保壁扇高地面超过2.5米
（8.3尺）以上 。
1. 请保持风扇的清洁。确保在干燥的地方使用。
2. 在安装和维修时需格外小心，以免扇叶弯曲变形。
3. 用干净的软布，肥皂和水擦拭，以清理风扇的污垢。把风扇擦干。
4. 请勿用汽油，天拿水或苯液当作清洗溶剂使用。
5. 请用浸过温和肥皂水的湿布或海棉来清洁塑胶部分。
安全和警告信息
安全注意事项
警告
请勿在高温高湿的环境中使用
本产品。
清洗及保养
6
5
Stand Fan
1. Plug the fan to a 240V~ 50Hz power supply. Select the desired speed (1, 2 or 3) by turning the speed
selector knob on the side of motor cover panel.
2. Press or lift the Oscillation Knob to start or stop fan oscillation.
3. To adjust vertical angle, switch o the appliance and tilt angle up or down as needed.
Wall Fan
1. Plug the fan to 240V~ 50Hz power supply. You can control your wall fan with the pull stings.
2. To switch the fan “ON” by pulling the RIGHT string. At rst start-up, the fan will operate at low speed. Pull the
same string a couple of times to reach desired fan speed.
3. Pull on the LEFT string to switch on the oscillation mode.
4. To adjust vertical angle, switch o the appliance and tilt angle up or down as needed.
零件名称
1. 护网装饰盖
2. 前护网
3. 护网圈
4. 护网圈盖
5. 扇叶
6. 后护网锁
7. 后护网
8. 后护网螺丝
9. 马达机身
10. 摆动旋钮
11. 速度选择钮
12. 螺栓
13. 电源线
14. 伸缩杆
SF2003F
WF2003F
7 8
15. 高度调整锁
16. 直立（支架）杆
17. 底盘
18. 底座重块
19. 底座垫圈和螺
1. 护网装饰盖
2. 前护网
3. 护网圈
4. 护网圈盖
5. 扇叶
6. 后护网锁
7. 后护网
8. 后护网螺丝
9. 马达机身
10. 电源线
11. 风扇体
12. 速度选择钮
13. 伸缩杆
2
5
67
8910
16
17
1
11
13
15
14
12
18
19
3
4
2
5
67
89
1
12
13
10
11
3
4
7 8
规格
型号
电压
功率
扇叶尺寸
扇叶片类型
每分钟转速
风量
有效面积
净重
产品尺寸
SF2003F WF2003F
240V~ 50Hz
130W
20”
Aluminium
1350 rpm
980 rpm
120m3/min ; 4237CFM
70m2
8.8kg
560 x 490 x (1060~1330)mm
5.1kg
560 x 380 x 660mm
高速
低速
*以上规格有任何的改变，恕无另行通知。
安装指南
安装底座
1.
拧紧底座螺丝
3.
用高度调整锁来调整高度
将后护网安装在马达组件上
4. 5. 6.
安装护网圈至前护网
7.
2.
拧紧后护网螺丝 拧紧扇叶。拧紧扇叶螺丝
SF2003F
10
9
安装指南
8.
把前护网套上后护网（网前商标摆正），
并将安装到后护网上
9.
按下护网夹把前后护网固定
WF2003F
安装护网圈至前护网
将后护网安装在马达组件上
1.
扭紧后护网锁 拧紧扇叶。拧紧扇叶螺丝
把前护网套上后护网（网前商标摆正），
并将安装到后护网上
6.
按下护网夹把前后护网固定
2.
5.
1. 3.2.
4.
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali KHIND Fan
