Kicker GOLD Series Manuale utente
2English
Contents
Overview........................3
Specifications........................ 4
Installation ......................5
Wiring Configuration............... 5
Box Building Notes ................ 7
Sealed Enclosures............... 10
Vented Enclosures............... 12
Warranty ......................13
Garantía | Garantie........48
50gold-c-230127
3English
Overview
IMPORTANT SAFETY WARNING
PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER, SPEAKER, OR
SUBWOOFER IN A DISTORTED, CLIPPED OR OVER-POWERED MANNER
CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT, POSSIBLY CATCHING
FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR COMPONENTS
AND/OR VEHICLE. AMPLIFIERS REQUIRE UP TO 4 INCHES (10CM) OPEN
VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1
INCH (2.5CM) CLEARANCE BETWEEN THE FRONT OF THE SPEAKER AND
ANY SURFACE. KICKER PRODUCTS ARE CAPABLE OF PRODUCING SOUND
LEVELS THAT CAN PERMANENTLY DAMAGE YOUR HEARING! TURNING UP A
SYSTEM TO A LEVEL THAT HAS AUDIBLE DISTORTION IS MORE DAMAGING
TO YOUR EARS THAN LISTENING TO AN UNDISTORTED SYSTEM AT THE
SAME VOLUME LEVEL. THE THRESHOLD OF PAIN IS ALWAYS AN INDICATOR
THAT THE SOUND LEVEL IS TOO LOUD AND MAY PERMANENTLY DAMAGE
YOUR HEARING. PLEASE USE COMMON SENSE WHEN CONTROLLING
VOLUME.
The KICKER Competition GOLD-series
subwoofers celebrate the history and
innovation of KICKER subs, combining
the latest engineering upgrades with
the toughness and low-end frequency
response that are KICKER hallmarks. The
Gold-Series introduce the latest KICKER
innovation of Forced-Air Cooling, which
uses the excursion of the woofer to
force out hot air while drawing in cool air.
This results in a 20% reduction in heat,
increasing the already industry-leading
reliability of our subs. The massive power-
handling and motor, double-stitched
surround and other features you’ve come to
expect are also present. Whether upgrading
an existing audio system or decking out
a new one, these subwoofers are the
foundation for your music.
4English
Specifications
Note: All specifications and performance
figures are subject to change. Please visit
www.kicker.com for the most current
information. To get the best performance
from your new KICKER speakers, we
recommend using genuine KICKER
accessories and wiring. Please allow two
weeks of break-in time for the speakers to
reach optimum performance.
Pro Tip: You’re a KICKER amplifier and a
few cables away from a full system upgrade
that will dominate any factory system!
KICKER line of amplifiers make it easy to
upgrade to solid bass with your existing
or stock source unit. Also, ask your dealer
about KICKER Speaker upgrades.
GOLD10 GOLD12 GOLD15
Woofer [in, mm] 10, 25 12, 30 15, 38
Recommended Amplifier Power [Watts RMS] 200–400 250–500 400–800
Peak Power Handling [Watts] 800 1000 1600
Sensitivity [1W, 1m] 85.7 87.1 89.7
Rated Impedance [Ω] 4 4 4
Fs [Hz] 41.4 37 33.7
Xmax (Linear Excursion) [mm] 17.5 17.5 17.5
Outer Frame Dimension [in, cm] 10-5/8, 27 12-1/2, 31.8 15-3/8, 39.1
Mounting Depth [in, cm] 5-1/4, 13.3 5-3/4, 14.5 7-15/16, 20.1
Mounting Cutout [in, cm] 9-1/8, 23.1 11, 27.9 13-3/4, 35
Frequency Response [Hz] 30–500 25–500 25–500
5English
Wiring Configuration
GOLD-Series subwoofers are made with
dual 4Ω voice coils. Both coils must be
connected to a source of amplification.
They will provide a 2Ω load wired in parallel
or 8Ω load wired in series. Make sure
your source unit or amplifier is rated
at the correct ohm load for operation.
The speaker wire should be kept away
from sharp edges and avoid the possibility
of getting pinched by the trunk. If a factory
hole and grommet do not exist or are
inaccessible, you must drill a hole through
which to run the wire. Be careful not to drill
into other wiring or existing mechanisms.
Any time a wire is run through a hole, it
is necessary to insert a rubber or plastic
grommet to protect the wire from damage.
Installation
6English
Series Wiring
Parallel Wiring
Dual 4Ω Voice
Coils = 8Ω Load
Dual 4Ω Voice
Coils = 2Ω Load
7English
Box Building Notes
Use 3/4” (1.9cm) or thicker MDF (medium
density fiberboard) and seal the joints with
silicone. Use the “template” inside your
GOLD subwoofer’s shipping carton to mark
the mounting hole, then cut directly on the
line. These designs need internal bracing.
Add triangular bracing between each of the
larger unsupported panels.
All the cubic feet (L) measurements in this
manual include the displacement of the
woofer. For the vented enclosures the
displacement of the port must be calculated
and added to the internal volume of the
final design. Use the outer dimensions of
the port and multiply “X x Y x Z”, convert to
cubic feet, for example the GOLD12 Vented
Minimum design’s external port dimensions
are, using 3/4” (1.9cm) MDF:
(12.5” + 1.5” total MDF wall thickness) x
(2.5” + 1.5” total MDF wall thickness) x
(20”) x (1 ft3/ 1728 in3) = .65 ft3
Then, add this number to the internal
volume of the enclosure. 1.75 ft3+ .65 ft3=
2.4 ft3
Due to the necessary length of these ports,
you may want to fold the port along the
bottom and back walls. It will be impractical
to use round ports for these designs.
8English
Y
X
Z
Do not install a port opening against a solid
surface, such as an internal brace, back-
panel or trunk wall, seat or interior panel of
your vehicle. The port opening must remain
unobstructed. Use the smallest dimension
of the rectangular port as the minimum
amount of space between the port opening
and any solid surface to insure unrestricted
airflow.
You can loosely fill your enclosure with
poly-fil stuffing. Ported designs will require
covering the end of the port (located inside
the box) with grill cloth, chicken wire, or
expanded metal to prevent the poly-fil
from exiting the port. The use of poly-fil will
slightly decrease efficiency, but will deepen
and extend the low frequency output by
making your subwoofer think it’s in a bigger
box.
9English
Add triangular bracing between each of the
larger unsupported panels.
For more advice on box building, refer to
your Authorized Kicker Dealer, or click on
the Support tab on the Kicker homepage,
www.kicker.com. Please e-mail
support@kicker.com or call Technical
Support at (405) 624-8583 for specific or
unanswered questions.
GOLD12, GOLD15: D = 3” x 3” (8cm x 8cm)
GOLD10: D = 2” x 2” (5cm x 5cm)
D
D
D
10English
Sealed Enclosures
These sealed enclosure designs give the
smoothest response with increased energy
at the lowest frequencies, 20 to 30Hz.
These designs deliver massive amounts of
highly-accurate bass and can be driven with
punishing levels of amplifier power.
The GOLD-Series high performance
suspension system can operate in a larger
sealed enclosure. This maximum enclosure
volume application is ideal for SQ (ultra
sound quality) installations. The Maximum
enclosure generates a very flat response
curve and superbly extends the sub-bass
response.
Minimum Sealed
Model Volume ft3(L) Power Handling
GOLD10 .8 (22.7) 400W RMS
GOLD12 1 (28.3) 500W RMS
GOLD15 1.8 (51) 800W RMS
Model Volume ft3(L) Power Handling
GOLD10 1.25 (35.4) 400W RMS
GOLD12 2 (56.64) 500W RMS
GOLD15 3 (85) 800W RMS
Maximum Sealed
Altri manuali per GOLD Series
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Lingue:
Altri manuali Kicker Subwoofer
Kicker
Kicker S18X Manuale utente
Kicker
Kicker CVX COMPVX12 Manuale utente
Kicker
Kicker KM10 Manuale utente
Kicker
Kicker Comp Woofer Manuale utente
Kicker
Kicker Solo-Baric S15L5 Manuale utente
Kicker
Kicker Solo-Baric VS10L5 Manuale utente
Kicker
Kicker HCVR12 Manuale utente
Kicker
Kicker SoloX 49L7X151 Manuale utente
Kicker
Kicker Comp C15 Manuale utente
Kicker
Kicker PWRA4P11 Manuale utente
Kicker
Kicker SRAMCQ09 Manuale utente
Kicker
Kicker COMPETITION C18c Manuale utente
Kicker
Kicker COMP12D4 Manuale utente
Kicker
Kicker TCVR10 Manuale utente
Kicker
Kicker SoloX L7X Series Manuale utente
Kicker
Kicker SOLO-BARIC VS12L7 Manuale utente
Kicker
Kicker 19417164 Manuale utente
Kicker
Kicker SOLO-BARIC L7S12 Manuale utente
Kicker
Kicker L7QB82 Manuale utente
Kicker
Kicker Comp12D4 Manuale utente
