Kilotech KHS 200-30 Manuale utente
Content
1. Introduction.............................................................. 1
Notice...................................................1
Safety Guide........................................1
2. Specifications...........................................................2
Features ...............................................2
Specifications ......................................3
Capacity and Resolution ...................4
Schematic Diagram ............................4
Dimension ........................................... 5
3. Operation Guide......................................................6
Power On.............................................6
Power Off.............................................6
Tare ....................................................... 7
Hold .....................................................8
Unit Switch..........................................8
Zero ......................................................9
Setting ..................................................9
4. Trouble-shooting ................................................... 12
5. Note.......................................................................... 13
Page 1 of 13
1. Introduction
Notice
Before you use the scale, please read this manual
through carefully, and keep it properly for future use.
Safety Guide
For good performance and precise measurement, be
careful with daily operation and maintenance. Note the
following instructions:
Do NOT overload the scale. This will damage the
loadcell and void the warranty.
Do NOT leave load hung on the scale for long. This
will decrease the scale’s accuracy and shorten the
loadcell’s life.
Inspect shackle and hook before using.
When the scale runs out of power, replace the
battery with fresh ones.
Do NOT use the scale under thunder or rain.
Do NOT attempt to repair the scale yourself.
Contact Kilotech at 800-694-4445, 877-328-5988 or
www.kilotech.com.
Page 2 of 13
2. Specifications
Features
This scale is a combination of the sound and
proven mechanical design, with today’s most advanced
electronics to provide a superb feature set. It is versatile,
reliable, accurate and easy to operate.
Quality In accordance with OIML R76,
GB/T11883-2002. ISO9001-2000
certified quality system.
Construction
& design
Stainless steel load receptor and
aluminum-casting case for better
safety.
0.75 inch - 20mm LCD, visual distance
over 10m. Dismountable hook.
SMT technology, quality integrated
circuit and dedicated weighing
loadcell, ensures long stability time.
Power 3*AA battery with low power
consumption design.
Page 3 of 13
Specifications
Accuracy Class Chinese GB/T 11883-2002 Class III
Equivalent to OIML R76
Tare Range 100% F.S.
Auto Zero ±50% F.S.
Manual Zero ±2% F.S.
Zero-tracking 0.5e/s
Reading Stable
Time
≤10 seconds
Auto-sleep Sable and no action in 3 sec.
Auto-off Sable and no action in 3 min.
Overload 100% F.S. + 9e
Max. Safety
Load 120% F.S.
Ultimate Load 300% F.S.
Battery Life >150 hours
Battery 3*AA battery
Temp. (Op.) - 10℃~ + 40℃
Humidity (Op.) ≤80% at 20℃(non-condensing)
Display 0.7 inch (17.78mm) numerical
Net Weight 620g
Page 4 of 13
Capacity and Resolution
Model Max. Cap.
(kg/lb)
E
(kg/lb)
Division
(n)
KHS 200-30 30/60 0.01/0.02 3,000
KHS 200-60 60/120 0.02/0.05 3,000
KHS 200-150 150/300 0.05/0.1 3,000
KHS 200-300 300/600 0.1/0.2 3,000
Schematic Diagram
Loadcell
ADC
PGA
CPU
LCD
KeyPower
Page 5 of 13
Dimension
Page 6 of 13
3. Operation Guide
Power On
Press for 1 second
to power up, battery tests
and initializes.
Screen shows
detection message
while scale detects
its load and
auto-zero itself.
Power Off
Press for 1 second
to power off scale.
Display shows
power-off message.
Page 7 of 13
Tare
Press to store
weight as tare.
“TARE” shows
and weight turns
zero.
If weight is over
100%F.S., or less
than 0, tare is not allowed.
If weight is not stable or held, tare is not
allowed.
Taring will reduce scale’s apparent
overloading range. E.g., if a 10kg container
is tared and scale’s maximum capacity is
50kg, scale will overload at a new weight of
40.18kg (5000 – 1000 + additional 9
divisions).
Press to restore tare.
“TARE” hides,
and weight
resumes in gross
mode.
Page 8 of 13
Hold
Press to lock the
display.
“HOLD” shows
and display is frozen.
Press again to
resume display.
“HOLD” hides
and display
resume refreshing.
Unit Switch
Press for 1 second
to switch measuring unit
between kg, lb and N.
If scale is tared, or
held, unit
switching is not
allowed.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Kilotech Scala
Kilotech
Kilotech S-2000 Manuale utente
Kilotech
Kilotech KRS 3000 Manuale utente
Kilotech
Kilotech KWD 15K Manuale utente
Kilotech
Kilotech Integrator C30 Manuale utente
Kilotech
Kilotech KRS SWP Series Manuale utente
Kilotech
Kilotech KSB series Manuale utente
Kilotech
Kilotech KPS 60 Manuale utente
Kilotech
Kilotech KPOS 1530 Manuale utente
Kilotech
Kilotech KPC 5000 Manuale di istruzioni
Kilotech
Kilotech KPC 5000 Manuale utente
Kilotech
Kilotech KPC 1500SS Manuale per l'uso e la cura
Kilotech
Kilotech KPC 1000SS Manuale per l'uso e la cura
Kilotech
Kilotech 851340 Manuale utente
Kilotech
Kilotech CTR Series Manuale utente
Kilotech
Kilotech KWS 301 Manuale utente
Kilotech
Kilotech KLE 200 Manuale utente
Kilotech
Kilotech KPC-2000 Manuale utente
Kilotech
Kilotech KPC 2000 Manuale utente
Kilotech
Kilotech KPC 1500SS Manuale utente
Kilotech
Kilotech KWD 500 Manuale per l'uso e la cura
