Kingwo LT03 Manuale utente
Vehicle GPS Tracker (LT03)
User Manual
(V1.1)
GPS Talks
LT03
Declaration
The contents of this manual will be updated from time to time without prior notice; the
updated content will be added to the new version of this manual. KINGWO will improve
or update the products or procedures described in the manual at any time. If there is a
description of the product in the manual that does not match the actual product, the
actual product shall prevail. KINGWO has the final interpretation rights of this manual.
GPS Talks
LT03
Content
Chapter 1: Photo ..................................................................................................................................................... 1
Chapter 2: Product features .................................................................................................................................... 2
Chapter 3 Technical Specification ........................................................................................................................... 3
3.1【Main unit】 ................................................................................................................................................ 3
Chapter 4: Functions ............................................................................................................................................... 4
4.1Basic function-Position ................................................................................................................................... 4
4.1.1 Position and monitor .............................................................................................................................. 4
4.1.2 Timely monitor ....................................................................................................................................... 4
4.1.3 Blind zone compensation ....................................................................................................................... 4
4.1.4 Cornering Compensation ........................................................................................................................ 5
4.1.5 LBS ....................................................................................................................................................... 5
4.1.6 AGPS ....................................................................................................................................................... 5
4.1.7 Battery level detect ................................................................................................................................ 5
4.1.8 Battery charge and discharge protection .......................................................................................... 5
4.2 Basic function-Alarm function ....................................................................................................................... 6
4.2.1 Low Voltage alarm .................................................................................................................................. 6
4.2.2 Over Speed, low speed alarm ................................................................................................................. 6
4.2.3 GPS module error alarm ......................................................................................................................... 6
4.3 Basic function-Intelligent function ................................................................................................................ 6
4.3.1 Intelligent Power save ............................................................................................................................ 6
4.3.2 Intelligent diagnosis ................................................................................................................................ 6
4.3.3 Static drift suppression ........................................................................................................................... 7
4.3.4 Mileage Statistics .................................................................................................................................... 7
4.3.5 Remote configuration ............................................................................................................................. 7
4.3.6 Remote upgrade(OTA) ............................................................................................................................ 7
4.3.7 Dual IP or domain ................................................................................................................................... 7
4.3.8 JTT808 Protocol ...................................................................................................................................... 7
4.4 LT03C extended functions ............................................................................................................................. 8
GPS Talks
LT03
4.4.1 Strong magnetic and tamper alarm function ......................................................................................... 8
4.5 Function list .................................................................................................... Error! Bookmark not defined.
Chapter 5 Installation guide .................................................................................................................................... 8
5.1 Product installation diagram ...................................................................................................................... 9
5.2 Installation and debugging process .......................................................................................................... 9
5.2.1 SIM card installation ........................................................................................................................ 9
5.2.2 Main unit power on ................................................................................................................................ 9
5.2.3 Parameters setting ............................................................................................................................... 10
5.3 Important Parameter Setting ................................................................................................................. 10
5.3.1 Upload interval setting ......................................................................................................................... 10
5.3.2 Position mode ....................................................................................................................................... 10
5.3.3Latent mode (optional) .......................................................................................................................... 10
GPS Talks
LT03
1
Chapter 1: Photo
GPS Talks
LT03
2
Chapter 2: Product features
1. The product is a rechargeable ultra-long standby position and monitor terminal;
2. This product is with built in with large-capacity industrial grade rechargeable polymer lithium
battery, capacity 5600mAH, voltage 3.6V;
3. This terminal supports most of 2G,3G and 4G network in the world, it would satisfy the requirements to use this
product in different regions or cross boarders.4G network only support TDD LTE/FDD LTE,3G network supports
WCDMA, 2G network support GSM/GPRS
4. The normal working status of the terminal is defined as follows: The GSM module and the
positioning module are all open and work normally. The terminal uploads position information
every 30S, and the GSM continues to work without sleep; the positioning module always works
regardless of whether there is a GPS signal.
5. The power-saving status of this terminal is defined as follows: in the power-saving mode, GSM sleep,
awake timely to upload a message (default interval 10 minutes); the positioning module is
completely closed, inaccurate position; in the power-saving state, it can be waked up via telephone,
SMS, GPRS wake up the terminal at any time;
6. The terminal is built in with high-sensitivity low-power three-axis G-sensor accelerometer, full-time
work, it can real time detect the working environment of the terminal , suppress the static drift and
automatic switch the terminal working mode
7. The terminal supports micro-USB interface charging on the market, the charging specification is
DC5V, 1A, compatible with most mobile phone chargers;
8. The equipment is divided into two versions: normal version and strong magnetic version; the strong
magnetic version has a built-in neodymium iron boron super permanent magnet, and has removal
alarm function.
GPS Talks
LT03
3
Chapter 3 Technical Specification
3.1【Main unit】
Characteristics Description
Built in battery
specification Rechargeable polymer lithium battery (3.7V, 5600mAH)
Working current Average Current<100mA；Power save<10mA
Dimension 92mm*59mm*24.5mm （L*W*H）/LT03
92mm*59mm*30mm（L*W*H）/LT03C
Weight
14
8
±5
g(
LT03
)
200±5g(LT03C)
Working
Temperature -20℃～70℃
Storage
Temperature -40℃～85℃
Relative Humidity
5%～95%
Frequency
4Gnetwork：TDD LTE/FDD LTE
3Gnetwork：WCDMA
2Gnetwork：GSM/GPRS
GNSS Parameter GPS L1:1575.42MHz;
BD B1: 1561.098MHz（Optional）
3.2【4Gfrequencies in different countries】
Regions
Frequencies
China/India TDD LTE:B38/B39/B40/B41
FDD LTE:B1/B3/B5/B8
WCDMA:B1/B8
GSM:900/1800MHz
Europe/Middle
East/Africa
TDD LTE:B38/B40/B41
FDD LTE:B1/B3/B5/B7/B8/B20
GPS Talks
LT03
4
WCDMA:B1/B5/B8
GSM:B3/B8
North America FDD LTE:B2/B4/B5/B12/B13/B14
WCDMA:B2/B4/B5
Australia/Taiwan/B
razil
FDD LTE:B1/B3/B4/B5/B7/B8/B28
WCDMA:B1/B2/B5/B8
GSM:B2/B3/B5/B8
Chapter 4: Functions
4.1Basic function-Position
4.1.1 Position and monitor
Including timely upload, blind zone compensation, speed mileage statistics, area monitoring and
other functions, the backend sends positioning commands, and the terminalreturns data including
longitude, latitude, speed, direction, and status information.
4.1.2 Timely Tracking
The vehicle GPS terminal can be configurable to upload the vehicle location, status info to the
backend at a certain time or at a certain period or according to certain time interval
4.1.3 Blind area data storage
When the terminal enters the GPRS blind zone, the trace data will be saved at the shortest interval
which is 30s, and the blind zone data will be uploaded to the platform when the GPRS is back online.
The blind zone compensation data can be saved up to 4000.
GPS Talks
LT03
5
4.1.4 Cornering Compensation
When the vehicle enters the curve lane, the terminal detects that the driving direction has a certain
angular deviation (default 20 degrees), and a timing upload message is added to ensure that the
driving track is more accurate.
4.1.5 LBS
The terminal uses GPS positioning by default. When the GPS enters the blind zone and cannot be
accurately located, the terminal automatically switches to the base station location. The terminal
acquires the base station information every 30S and uploads the base station information. The
specific location is resolved by the server.
4.1.6 AGPS
The terminal has the AGPS function. When the terminal is connected to the GPRS, the AGPS function
can be used to speed up the positioning speed of the GPS module and improve the positioning
accuracy.
4.1.7 Battery level detect
The terminal can real time monitor the built-in battery voltage and battery capacity in real time and
upload it in real time. It is generally recommended that when the battery capacity is less than 10%,
the user needs to charge the terminal.
4.1.8 Battery charge and discharge protection
The terminal has double charge and discharge protection function, which ensures that the battery
will not be damaged due to over-discharge when the terminal is stored for a long time; and also
ensures that the charging process is caused by ultra-long charging to prevent risk of battery damage
and equipment damage.
GPS Talks
LT03
6
4.2 Basic function-Alarm function
4.2.1 Low Voltage alarm
When the battery power is lower than 10%, the terminal will report a low-voltage alarm to the
platform, and the user needs to charge the terminal as soon as possible.
4.2.2 Speeding, low speed alarm
When the vehicle speed is higher than the overspeed alarm value, the vehicle terminal will notify the
monitoring center. Similarly, when the vehicle speed is lower than the low speed alarm value, a low
speed alarm will be reported to the monitoring center. The alarm value is configurable.
4.2.3 GPS error alarm
When the terminal detects that the GPS/BD module is working abnormally, it reports the GPS
receiver failure alarm to the monitoring center.
4.3 Basic function-Intelligent function
4.3.1 Power save
The terminal has a built-in high-sensitivity G-sensor accelerometer to monitor whether the vehicle is
moving or not. When there is no motion state detected for a long time, the host automatically enters
the power saving state, turns off the GPS/BD module, and the GSM enters the heartbeat upload
state.
4.3.2 Self- diagnosis
The vehicle terminal can perform self-diagnosis. In the event of a fault, it will send a fault notification
to the center, such as GPS, GSM, etc., and can automatically take relevant measures. The monitoring
GPS Talks
Indice
Altri manuali Kingwo GPS
Kingwo
Kingwo MT02S+ Manuale utente
Kingwo
Kingwo NT09E Manuale utente
Kingwo
Kingwo MT200 Manuale utente
Kingwo
Kingwo NT07E Manuale utente
Kingwo
Kingwo MT02S Manuale utente
Kingwo
Kingwo LT12 Manuale utente
Kingwo
Kingwo MT36 Manuale utente
Kingwo
Kingwo NT08E Manuale utente
Kingwo
Kingwo MT02S Manuale utente
Kingwo
Kingwo MT12 Manuale utente
