KitchenAid KEK1032 Manuale utente

KEK1032

W11030459A_ENv17.indd 1 4/17/18 11:50 AM

2 | PARTS AND FEATURES

PARTS AND FEATURES

PARTS AND ACCESSORIES

Built-in thermometer

Control panel with

Hold Temp feature and

F°/C° change function

Goose-neck spout

designed for

expert-quality

precision pour control

Kettle base

with digital display

1-L capacity

Precision

Kettle

Power cord with

attached cord wrap

Lid

W11030459A_ENv17.indd 2 4/17/18 11:50 AM

ENGLISH

PARTS AND FEATURES | 3

PARTS AND FEATURES

3-position precision ﬂow

control (inside body)

Flow control lever

Since 1919

Built-in thermometer dial

Control panel with

Hold Temp feature and

F°/C° change function

Add Water icon

Hold Temp icon

Hold Temp button

- button

+ button

Heating icon

Power button

W11030459A_ENv17.indd 3 4/17/18 11:50 AM

4 | PRECISION KETTLE SAFETY

PRECISION KETTLE SAFETY

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always

be followed, including the following:

1. Read all instructions.

2. Do not touch hot surfaces. Use handles.

3. To protect against re, electrical shock, and injury to persons, do not immerse

base, cord, plug, or the Precision Kettle in water or other liquids.

4. Use close supervision when using the Precision Kettle near or by children.

5. Unplug the Precision Kettle from outlet when not in use and before cleaning.

Allow to cool before putting on or taking off parts, and before cleaning the

appliance.

6. Do not operate the Precision Kettle with a damaged cord or plug or after the

appliance malfunctions or has been damaged in any manner. Return appliance

to the nearest Authorized Service Center for examination, repair, or adjustment.

7. Use of replacement parts or accessory attachments not recommended by

manufacturer may result in re, shock, or injury to persons.

8. Do not use outdoors.

9. Do not let cord hang over counter or table edges, or allow to come into contact

with heated surfaces.

W11030459A_ENv17.indd 4 4/17/18 11:50 AM

ENGLISH

PRECISION KETTLE SAFETY | 5

PRECISION KETTLE SAFETY

ELECTRICAL REQUIREMENTS

Voltage: 120 VAC

Frequency: 60 Hz

Wattage: 1000 W

NOTE: The Precision Kettle has a

3 prong grounded plug. To reduce the

risk of electrical shock, this plug will fit

in an outlet only one way. If the plug

does not fit in the outlet, contact a

qualified electrician. Do not modify

the plug in any way.

Do not use an extension cord. If the power

supply cord is too short, have a qualified

electrician or service technician install an

outlet near the appliance.

A short power supply cord (or detachable

power supply cord) should be used to

reduce the risk resulting from becoming

entangled in or tripping over a longer

cord.

10. Do not place on or near a hot gas or electric burner, or in a heated oven.

11. The Precision Kettle should only be used to heat water.

12. Do not use the Precision Kettle without lid properly closed.

13. Do not use the Precision Kettle with loose or weakened handle.

14. Do not use the appliance for other than intended use.

15. Do not clean the Precision Kettle with abrasive cleaners, steel wool,

or other abrasive materials.

16. Do not overll the Precision Kettle.

17. Scalding may occur if the lid is removed during the heating cycle.

18. To disconnect, turn the control to “off,” then remove plug from wall outlet.

SAVE THESE INSTRUCTIONS

This product is designed for household use only.

W11030459A_ENv17.indd 5 4/17/18 11:50 AM

6 | USING THE PRECISION KETTLE

FOR DETAILED INFORMATION ON

USING THE PRECISION KETTLE

Visit kitchenaid.com/quickstart for

additional instructions with videos and tips

on how to use your Precision Kettle.

Before ﬁrst use

Before using your Precision Kettle for the rst time, wash the kettle and all accessories,

including the lid, with warm, soapy water, then rinse with clean water and dry. Fill the

Precision Kettle with water to the MAX ll line (see example below) and run one cycle at

the maximum temperature. To avoid damage, do not fully immerse the Precision Kettle in

water, and do not use abrasive cleaners or scouring pads.

NOTE: The entire Precision Kettle is hand wash only. To avoid damage, do not wash any

part of the Precision Kettle, its accessories, or the base with power cord in a dishwasher.

PREPARING THE PRECISION KETTLE FOR USE

USING THE PRECISION KETTLE

Since 1919

Fill the Precision Kettle with water to the

MAX ll line inside the Kettle.

IMPORTANT: Be sure that the vent holes

at the top of the kettle are clean and free

of obstruction, or the Precision Kettle

may overflow.

1Place the base with power cord on

a flat, sturdy surface and plug it into

a 3 prong grounded outlet.

W11030459A_ENv17.indd 6 4/17/18 11:50 AM

ENGLISH

USING THE PRECISION KETTLE | 7

USING THE PRECISION KETTLE

BREW/STEEP TEMPERATURE SUGGESTIONS

The KitchenAid®Precision Kettle allows you to condently pour with precision. It features

the industry-standard 1-liter capacity carafe. Select your desired brewing temperature

customizable in 1-degree increments ranging from 140-212°F (60-100°C), with the option

to hold for 30 minutes. A brew-range thermometer is displayed on the lid to keep track

of your water temperature while you pour so you know you are within your preferred

brewing range.

NOTE: The Precision Kettle is designed for water only. Do not put any other liquids

or substances in the Precision Kettle.

BEVERAGE Coffee Green

Tea White

Tea Oolong

Tea Black

Tea Herbal

Tea

SUGGESTED

TEMPERATURE

(C°/F°)

92-96°C 80°C 85°C 90°C 95°C 100°C

196-205°F 176°F 185°F 194°F 203°F 212°F

SUGGESTED

BREW/

STEEP TIME

(MINUTES)

3-5 1-3 3-5 3-5 4-5 5-7

The above suggestions are points of reference. KitchenAid

recommends that you experiment with temperature and

brew/steep times to nd the perfect formula for your

preferred cup of coffee or tea.

For easy reference, the suggested temperature range for

brewing coffee is shown in red on the built-in thermometer.

This chart shows the boiling point of water at different altitudes. Please refer to this chart

in order to adjust your temperature setting according to the elevation in your area.

ALTITUDE BOILING POINT REFERENCE GUIDE

90.5°/194.9°

91.6°/196.8°

92.6°/198.7°

93.7°/200.6°

94.7°/202.5°

95.8°/204.4°

96.8°/206.3°

97.9°/208.2°

98.9°/212°

100°/212°

BOILING POINT °C/°F

ELEVATION*

Since 1919

*Elevation shown in feet above sea level.

W11030459A_ENv17.indd 7 4/17/18 11:50 AM

8 | USING THE PRECISION KETTLE

USING THE PRECISION KETTLE

Your Precision Kettle has three flow

control settings. The flow control

lever inside the kettle is used to

change the settings.

2Push the lever down for more

restricted flow; pull the lever up

for less restricted flow.

CHANGING THE FLOW CONTROL

NOTE: After heating water, be sure to empty the Precision Kettle and allow it to cool

completely before changing any flow rate settings.

TIP: The flow control lever is meant to come out for cleaning. If you pull up too

far while changing the flow rate settings and the lever comes out, it can easily slide

back into place.

TIP: Prior to first use, fill the Precision Kettle with room-temperature water and pour at

each flow control setting to become familiar with the different flow rates.

CUSTOMIZING THE KETTLE LID TENSION AND FLOW

CONTROL LEVER

If you feel the lid is too hard or too

easy to remove, try adjusting the

tension. Use a small tool, such as a

small screwdriver, to adjust the three

tabs on the kettle rim. Push in to

create less tension; pull out to create

more.

After adjusting tabs, put the lid back

on the Precision Kettle to test the

setting and see if your adjustment

is satisfactory. Continue to adjust

as needed.

W11030459A_ENv17.indd 8 4/17/18 11:50 AM

ENGLISH

USING THE PRECISION KETTLE | 9

USING THE PRECISION KETTLE

FILLING THE PRECISION KETTLE WITH WATER

1Remove lid from the Precision Kettle

and fill with water. 2Replace the lid and put the Precision

Kettle back on the base.

NOTE: Do not fill past the MAX fill line of

1 liter.

IMPORTANT: There must be a minimum

of 1 cup (.25 L) of water for the Precision

Kettle to operate. If the water level drops

below this point, the Add Water icon will

light, and you will need to add water to

the Kettle before continuing use.

If you feel the flow control is too easy

or too hard to move, use your fingers

to adjust the tab on the flow control

lever. Push in to create less tension;

pull out to create more.

4Test the flow control to see if the

tension is correct; continue to adjust

if needed.

W11030459A_ENv17.indd 9 4/17/18 11:50 AM

10 | USING THE PRECISION KETTLE

USING THE PRECISION KETTLE

HEATING WATER

Press the (Power) button to save

temperature and to begin heating

the water. The (Heating icon) will

be displayed on the LCD screen to

indicate that the Precision Kettle

is heating.

While heating, the temperature

that shows on the display screen

is the actual water temperature,

not the selected temperature.

When the Precision Kettle is first

placed on the base, the display will

show 212°F or 100°C*. After a few

moments, the display will update to

show the actual temperature of the

water in the Precision Kettle.

Press the “-” or “+” buttons to select

your desired water temperature

between 140-212°F (60-100°C).

For faster temperature adjustment,

hold the “-” or “+” button down

for 3 seconds, and the temperature

readout will scroll faster.

NOTE: The temperature can be displayed in Celsius (C) or Fahrenheit (F). To toggle

between Celsius and Fahrenheit, hold the “-” and “+” buttons down at the same

time. Refer to the “Altitude boiling point reference guide” for information on the peak

temperature setting for your altitude.

NOTE: The button does not function

when the Precision Kettle is off the base.

*The Precision Kettle has a temperature

memory feature for your last selected

temperature (between 140-212°F

[60-100°C]). This feature will determine

the temperature that appears on the

display after the first use.

W11030459A_ENv17.indd 10 4/17/18 11:50 AM

Altri manuali per KEK1032

Indice

Lingue:

Altri manuali KitchenAid Bollitore

KitchenAid

KitchenAid KEK1222OB0 Manuale utente

KitchenAid

KitchenAid 5KEK1222 Manuale utente

KitchenAid

KitchenAid KEK1025 Manuale utente

KitchenAid

KitchenAid 5KEK1222 Manuale utente

KitchenAid

KitchenAid 5KEK1565 Manuale utente

KitchenAid

KitchenAid 5KEK1722 Manuale utente

KitchenAid

KitchenAid KEK1222ER Manuale utente

KitchenAid

KitchenAid 3KEK1222L Manuale utente

KitchenAid

KitchenAid KEK1722 Manuale utente

KitchenAid

KitchenAid KEK1322SS0 Manuale utente

KitchenAid

KitchenAid KXC13AV Manuale utente

KitchenAid

KitchenAid 5KEK1565 Manuale utente

KitchenAid

KitchenAid 5KEK1522 Manuale utente

KitchenAid

KitchenAid 5KEK1522 Manuale utente

KitchenAid

KitchenAid 5KEK1522 Manuale utente

KitchenAid

KitchenAid 5KEK1222A Manuale utente

KitchenAid

KitchenAid KEK1322 Manuale utente

KitchenAid

KitchenAid KTEN15AN Manuale utente

KitchenAid

KitchenAid Pro Line KEK1522OB Manuale utente

KitchenAid

KitchenAid 5KEK1522A Manuale utente

KitchenAid

KitchenAid 5KEK1565 Manuale utente

KitchenAid

KitchenAid KNK1012 Manuale utente

KitchenAid

KitchenAid W10530534A Manuale utente

KitchenAid

KitchenAid KEK1522CA Manuale utente

Manuali Bollitore popolari di altre marche

IKEA

IKEA UPPHETTA Manuale utente

Krups

Krups BW500B55 Manuale utente

Clas Ohlson

Clas Ohlson KE7086-BH Manuale utente

Brock

Brock WK 0902 GR Manuale utente

inventum

inventum CBW010 Manuale utente

Westfalia

Westfalia Retro 81 48 86 Manuale utente

Ovente

Ovente KS88 Series Dimensioni

HUSLOG

HUSLOG AK-0832 Manuale utente

Saturn

Saturn ST-EK840 Manuale utente

Wilfa

Wilfa TK-1200B Manuale utente

HOME ELEMENT

HOME ELEMENT HE-KT150 Manuale utente

Breville

Breville Crystal Clear BKE290 Manuale utente

ECG

ECG RK 1745 Manuale utente

cecotec

cecotec THERMOSENSE 600 TOUCH BLACK Manuale utente

Kalorik

Kalorik JK 39825 Manuale utente

tomado

tomado TM-1971 Manuale utente

Cosori

Cosori CS108-NK Manuale utente

Electrolux

Electrolux E7K1-6BP Manuale utente