KJB Xtreme Life Wireless QUAD/QUAD LCD Manuale utente

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

QUAD or QUAD LCD Receiver Manual

Table of Contents

Warning & Precautions 2

Includes/What’s in the Box 3

Introduction 4

Quick Setup Guide & Product Features 5

Setup 6

Apple or Android App 15

ASP4 Installation Instructions 17

Playback 21

Specications 22

FAQ and Troubleshooting 23

Pictures 24

Warranty & Disclaimers 28

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Do not open/modify the device, as it may cause damage to the unit and void the Warranty.

For internal repairs, consult your dealer or an Authorized Service Center.

Do not use any accessories or power supplies other than what comes with the device,

otherwise it could void the warranty.

Protect from humidity. Do not put it in water and be careful to protect it from rain, sea

water, or high humidity environment. Do not operate the unit near a bath tub, shower, sink,

swimming pool, etc.

Protect from high temperatures

To avoid damage or mis-operation of the device, only use in temperature of 0 ~ +40°C(32 ~

104°F).

Do not bring the device suddenly from a hot to a cold place, or vice versa. This may cause

damage to the inside of the unit by creating condensation.

EU Environmental Protection

The symbol of crossed-out garbage shows that this product should not be treated as

household waste, as it falls into the category of electric /electronic equipment for recycling.

This electronic device should not be disposed of in regular trash. We strongly advise you to

contact your local authority for proper disposal of this product.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Includes

QUAD Version

1. Receiver

2. RCA Cables

3. USB Cable

4. Antenna

5. Remote

6. Power Supply

QUAD LCD Version

1. Receiver

2. Remote

3. RCA Cables

4. Receiver Brackets

5. USB Cable

6. Antenna

7. Power Supply

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Introduction: Xtreme Life Wireless QUAD/QUAD LCD

Thank you for purchasing the Xtreme Life Wireless QUADs, with a Digital Wireless Receiver and built in DVR

Recording Systems capable of recording on to an SD card, and has a USB to PC interface that enables Direct

to PC Video Recording and Remote Video Access. Xtreme life are battery operated hidden camera systems

was designed to be a long life battery-operated hidden video recorder. To accomplish extended battery life,

your system uses a technology known as PIR(Passive Infrared). You’ll nd the PIR sensor located next to or near

your camera. The PIR sensor regulates power to the internal video recording components and is the triggering

system that initiates recording. When there is no activity in range of the PIR sensor, the camera and the DVR will

be powered down. When the sensor is triggered it will send a signal to turn on the camera and begin recording

almost instantly. The less activity the longer the system will maintain battery life.

To access your live video remotely, simply type in the supplied website address into your internet browser to

obtain instance remote video access, whether you are at home or away from your location. Never deal with

complicated IP Conguration again. Xtreme Life Wireless QUADS allow users to connect up to 4 Wireless Hidden

Cameras to 1 receiver for a full covert video surveillance system. Download the “EZ-See” Mobile App for Apple

and Android devices, and get instance video access on the go!

All of our SleuthGear line of hidden cameras are designed and assembled in Nashville, TN USA, and backed by

our 1 year warranty. Visit our website to see the full line of SleuthGear hidden cameras at www.mysleuthgear.

com

We invite you to explore the Quick Setup Guide below to learn more how to operate your Xtreme Life

hidden camera.

Introduction: Zone Shield Wireless Quad/Quad LCD

Thank you for purchasing the Zone Shield Wireless QUADs system. This system was designed for recording

multiply cameras to your PC or recording video on the local memory card (not included), with no additional

cost to you. With the Zone Shield system you can view video wherever you are from a PC or your Smartphone,

simply type in the supplied website address into a internet browser to obtain instance remote video access or

Download the free“EZ-See”Mobile App for Apple and Android devices, and get instance video access on the go!

Zone Shield Wireless QUADS allow users to connect up to 4 Wireless Hidden Cameras from our SleuthGear

wireless Quad line to 1 receiver for a full covert video surveillance system.

All of our SleuthGear line of hidden cameras are designed and assembled in Nashville, TN USA, and backed by

our 1 year warranty. Visit our website to see the full line of SleuthGear hidden cameras at www.mysleuthgear.

com

We invite you to explore the Quick Setup Guide below to learn more about how to operate your Zone Shield

Wireless hidden camera.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Quick Setup Guide

1. Step 1: Unpack unit and insert the CD into your PC to install the provided ASP4 software on your PC.

2. Step 2: Use the provided USB cable to connect the QUAD LCD receiver to your PC.

3. Step 3: Click on the two gears icon for the Settings screen to personalize your recording preferences and

set up for remote view.

4. Step 4: Click the Quad View icon or Channel icons to return to the main screen.

5. Step 5: Plug in the Zone Shield Wireless device. The ASP4 viewing window on yor PC should now

display what the camera sees.

No more IP hassles, router congurations, or port forwarding. Locate the website address on the label found

on the back of your receiver, install ASP4 software on your PC, connect your receiver to your PC using the

provided USB cable, and the Xtreme Life unit is ready for use.

Product Features

• Build Your Own Hidden Camera System: Connect up to 4 of Any Combination of Xtreme Life or Zone

Shield QUAD Wireless Hidden Cameras

• 2 Dierence Wireless Receiver Choices: QUAD or QUAD LCD(includes built-in LCD screen)

• 4 to 1 Connectivity: Choose 1 Receiver Connect up to 4 Cameras

• Digital 2.4GHz Wireless Video Transmission with No Interference

• Continuously Power Systems for Round the Clock Surveillance

• Indoor/Outdoor Hidden Video Surveillance Systems (select models)

• Night Vision - Hidden IR Lights Capture Video at Night (select models)

• Time/Date Stamped Files

• Record your Video to PC or a Memory Card

• ASP4 PC Software

• Live Remote Video Access

• Live Mobile & Smartphone Video Access

• Free Mobile Application (Apple, Android)

• When Privacy Matters our Completely Concealed Cameras Hide in Plain Sight

• No Visible Wires

• 1 Year Manufacture Warranty

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Initial Setup

Pairing Camera and Receiver

1. Connect the provided power supply to your camera. Now you are ready to pair your camera with the

receiver.

2. Turn on your receiver (see Power Button location on Pg. 3):

a) If using the QUAD LCD receiver (Fig 2) simply press the Power Button.

b) If using the QUAD receiver (Fig 2) connect the provided RCA cables from the video output on the

receiver to the input on a TV or monitor, then press the Power Button.

The Power LED will glow red when the power is on.

3. What is Pairing? Pairing creates the secure connection between the receiver and the camera(all units are

paired at the factory for easy setup).

Note: The receiver cannot be plugged into the computer via the USB cable, while attempting to pair.

a) Select a channel (1-4) on the receiver by pressing the pair button - Fig. 1.

b) Press and hold the pair button until the channel LED light ashes blue - Fig. 2

c) Press the pair button on your camera (see Pair Button location on Pgs. 24-25)

d) If the pairing is successful the blue channel LED on the receiver will ash rapidly and the camera

image will be shown on the monitor or TV.

4. To pair additional cameras press the pair button and quickly release it to change the receiver channel.

Then repeat pairing process from step 3 on a new channel.

Fig 1 Fig 2

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Set up the PIR: Xtreme Life™ Wireless QUAD/QUAD LCD

( If your unit is battery operated, it comes with a PIR)

PPassive InfraRed (PIR) sensors detect levels of infrared radiation (IR). The hotter an object is, the more

IR it emits. The PIR sensor, using very little power, allows the transmitter to stay o until activity

is detected, conserving battery life. When there is a change in IR levels, considered motion, the

transmitter will turn on. When the transmitter turns on, it will automatically pair with the receiver. In

order for the transmitter to automatically pair with the receiver, they will rst need to be manually

paired. See Initial Setup (pg. 4) for pairing instructions.

PWhen the transmitter and receiver pair, the

camera’s image will be shown on the monitor.

When the PIR sensor no longer detects a

change in IR, the transmitter will turn o

thus conserving the battery life. While the

transmitter is turned o, the camera images will

go blank and the image to the right will appear

on your LCD screen or monitor . When using /

viewing ASP4 software, the camera images will

freeze. The next time the PIR detects IR and

triggers the transmitter, the image will resume

transmitting video.

EITHER/OR

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Remote Control

Button Function Description(s)

Power

Playback Press the

button to get

to the playback

menu. During

playback, press

the button

to pause,

press again to

continue

Panic

Record

Start to record

manually. Press

again to cancel

recording

mode.

QUAD QUAD display

mode

SEQUENCE Auto sequence

display mode

MENU Menu

CH1 Channel 1 &

Number 1 &

punctuation

marks “-/+”

CH2 Channel 2 &

Number 2 & “A

B C”

CH3 Channel 3 &

Number 3 & “D

E F”

CH4 Channel 4 &

Number 4 & “G

H I”

Button Function Description(s)

Numbers Numbers 5

to 0. English

characters and

punctuation

marks “•_•”

Clear

Return Return to last

page

Confirm Enter

Up/Down/

Right/Left

MENU Key sound o

Lock Key Lock

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Digital Wireless Receiver Type

Zone Shield QUAD Fig 1

With LCD Screen

Zone Shield QUAD LCD Fig 2

Channel LED Indicator (Blue)

REC LED (Green)

SD Slot

QUAD View/Single

CH Switching Button

Pairing Button

Channel LED

Indicator (Blue)

REC LED (Green) Pairing Button

SD Slot

QUAD View/Single CH

Switching Button

Power

Socket

Antenna

(SMA Reverse)

Power

Button A/V Out

Alarm Out Power LED

(Red)

Mini USB Port

Speaker

Power Button

Power LED (Red)

Power Socket

Alarm Out

A/V Out

Antenna

(SMA Reverse)

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Remote View Requirements

PThe software and minimum hardware requirements to use remote viewing on a PC are:

• Microsoft Windows XP or Windows 7 (.NET Framework 3.5 higher)

• Internet Explorer 8 or higher; Google Chrome

• CPU: 2.0GHz or higher (only support x86 and x64)

• Memory: 1GB

• Display card: Independent display card and support DirectX 9.0 or higher.

PThe software and minimum hardware requirements to use remote viewing on an iPhone/iPad are:

• iPhone 3 or higher

• iPad

• iOS 4.3 or higher

PRecommended internet speed: 1 MB per second upload speed. The download speed is irrelevant for

the network where the receiver is located as the video stream is uploaded to the EZ-See server. To

check your internet speed, go to a bandwidth testing site, such as http://www.speedtest.net/.

PIn order to enable constant remote video access, a PC will need to be on at all times running the

supplied ASP4 software. The receiver will also need to be connected to the USB port of the same

PC that is running the ASP4 software.

A Few Words About Remote-View Technology

PStreaming video is only as good as the equipment and connections that enable it. There are several

factors that aect remote video streaming. These factors include the connection speed, current

system loads, and available bandwidth of the internet connections on both the web server(your

computer) and the remote view computer or smart phone. Video loss and freezing are typically

due to an insucient internet connection. If video loss or freezing occurs this will not aect ASP4

recording(video recording on hosting PC).

*If in an oce setting please consult your IT department when installing the ASP4 software. The company

network could have a rewall that blocks ASP4 from sending video to the EZ-See website.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali KJB Ricevitore

KJB

KJB PVTS3-U Guida utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente