KNOP KNOPtool USB901 Manuale utente
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 97840444
User manual
USB901
KNOPtool
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
2
Table of Contents
Warning and safety instructions......................................................................................................3
Intended use...................................................................................................................................4
Commissioning...............................................................................................................................5
USB901 - Firmware update.............................................................................................................6
KNOPtool - updates........................................................................................................................7
KNOPtool - basics...........................................................................................................................8
KNOPtool - connecting..................................................................................................................11
KNOPtool –firmware update product............................................................................................13
KNOPtool - Setup .........................................................................................................................14
KNOPtool - Battery information.....................................................................................................15
KNOPtool –factory reset ..............................................................................................................16
Maintenance.................................................................................................................................17
Spare parts and accessories.........................................................................................................17
Technical data: .............................................................................................................................18
Symbol explanation and approvals ...............................................................................................19
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
3
Warning and safety instructions
●Read intended use before putting into service.
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
4
Intended use
USB901 and the associated KNOPtool program, is used for updating the firmware in KNOP
products.
KNOPtool is also used to change the settings of the product and some types of products like
MR902, the settings can be saved and downloaded from your computer either for backup and/or
copying the settings.
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
5
Commissioning
The manual can be used for both USB900 and USB901. KNOPtool is the same for both products.
Download installer from our homepage knop.dk or knop.se.
To find it, search for USB901, here is a download link for the KNOPtool installer.
•Unzip the downloaded file by double-clicking on it, which is usually located in your
downloads folder.
•Run the installer “KNOPToolSetup.exe” typically in your download folder. You might need
to accept to run the file and/or you might to input administrator rights to install it, if this is
case, please ask your IT department for help.
•Select Destination Location, if okay just press “Next”
•The installer will create a folder, accept folder or change it. Press “Next”
•If you want it to create a desktop shortcut, select it if so. Press “Next”
•Press “Install” and wait a few seconds.
•First time you install KNOPtool it is can be a good idea to select “Install USB driver”.
•Press “Finish”. If you have selected “Install USB driver” it will start installing the driver,
please follow the instruction on screen.
Insert the USB901 into a free USB port. If using a USB-C port, you need an adapter which widely
available.
KNOPtool is only available for Windows 10/11.
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
6
USB901 - Firmware update
When a USB901 firmware update is needed, KNOPtool will automatically notify you.
Press [1] (Yes)
The software is automatically downloaded from our server.
Press [2] (Program)
Exit - Press [3] (X)
Note: In older versions (prior to V2.0) this must be done manually in "File" in the "Firmware
update USB901" menu - the firmware file must be sent from us.
1
K
N
O
P
T
o
o
l
2
K
N
O
P
T
o
o
l
3
K
N
O
P
T
o
o
l
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
7
KNOPtool - updates
When a new version of KNOPtool is ready, KNOPtool will alert you to this.
The new version is downloaded from our website and reinstalled.
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
8
KNOPtool - basics
Please make sure you have connected the USB901 to your computer.
Check if the USB901 is connected. In this example [1] it is green and connected to COM3.
If it is red you need to go into the “COM port” tab, here you can search or select it. If no COM’s are
found or selectable you might have forgotten to install the USB driver.
[1] (File) The tab line has several pulldown functions.
File: Select firmware file
Firmware update
Close
COM-port: Search
NONE
Auto
COMx
Compatibility mode: Standard mode
CT901 before ver. 3.1.4
LS901 before ver. 3.1.0
MR902 before ver. 1.4.0
RP902 before ver. 1.3.0
RX901 before ver. 1.9
TX901 before ver. 1.1.0
If you are connecting a product with an older firmware version as listed above, you need to select
the compatibility mode. When connected please update the firmware of product if available,
disconnect and set Compatibility mode back to standard before reconnecting.
1
K
N
O
P
T
o
o
l
1
K
N
O
P
T
o
o
l
2
K
N
O
P
T
o
o
l
3
K
N
O
P
T
o
o
l
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
9
Monitor: This opens a new window. In this window transmitted telegrams are shown. The
monitor will not show telegrams transmitted in a repeater system (MR902/RP902), only
the telegrams between TX a device and system. In a standalone setup everything is
shown.
The monitor is for debugging you setup.
Hold The checkbox will hold the update of telegrams in window.
Clear Clears the window.
Time From ID Who To ID Telegram No Battery HF S/W Clock Data
12:59:20.745 From=135000 TX901 To=Pager KEY1ALARM Tx#1 Batt=2,610V -62dBm Ver=1.3.0 Clk-2 D='TX901'
12:59:29.587 From=135000 TX901 To=Pager KEY2ALARM Tx#1 Batt=2,610V -61dBm Ver=1.3.0 Clk-2 D='TX901'
12:59:37.772 From=135000 TX901 To=Pager KEY3ALARM Tx#1 Batt=2,600V -66dBm Ver=1.3.0 Clk-2 D='TX901'
12:59:45.764 From=135000 TX901 To=Pager KEY4ALARM Tx#1 Batt=2,600V -58dBm Ver=1.3.0 Clk-2 D='TX901'
Time: Timestamp
From ID: Telegram from ID (serial number of product).
Who: Product type of transmitting unit.
To ID: Telegram to ID, Pager/Bus is for all devices.
No: Number of telegrams transmitted. Retransmitted up to 3
times if failed.
Battery: Battery status of transmitting unit, if applies.
HF: Level of HF signal, signal levels closest to null is the best.
S/W: Firmware version of transmitting unit.
Clock: Information, shows how good the clock is in the
transmitting. Clk-3 is best.
Data Externed data. Information only.
LF position: Test of positioning. The quality of received position codes can be sent and tested.
Mode: TX Transmits position code specified in "Code" when "Transmit code" is
checked. The range is approx. 20 cm.
USB901/KNOPtool V1.1
©KNOP Elektronik A/S
Fabriksvej 20DK-7600 Struerknop@knop.dkwww.knop.dk+45 9784044
10
Mode: RX RX Measures signal strength of position transmitter. Measurements
must be taken around the entire doorway.
It may be important, depending on the situation, that the USB901 is held
vertically to measure the highest level. Optionally use a short USB
extension cable with a laptop (not included).
Normally, if more than 1.50 db/µV is measured, the level is acceptable.
Help: About Shows software and firmware versions of KNOPtool and
USB901.
[2] RX window Shows received telegrams from product shortly.
[3] System Selected when updating in a master repeater system.
Indice
Altri manuali KNOP Ricevitore
