Intended use
TX901D is a 2-channel transmitter designed to transmit to the KNOP 901 series receivers.
The product has an on/off switch.
The external inputs are activated either via RJ45 or mini-jack connectors.
The product can be powered either via the internal batteries (AA alkaline) or via Micro-USB or via
the RJ45 connector.
TX901D can be used together with MR902/RP902 repeater system.
Adapter cables are available as accessories - see knop.dk.
Check the coverage area
One person activates the product at short intervals, while another person systematically walks
around the area and marks on a sketch the building and the area where there is coverage. The
map is placed in the office so that anyone who needs to use the system can see where there is
coverage. Outside the coverage area, alarms cannot be received.
Contact your retailer for more information.
Alarm call
When the external input is activated, the LED flashes green and briefly lights green when the
transfer is successful or red if the transfer fails.
TX901D repeats the transmission up to two times at 30-second intervals if the transmission fails.
Commissioning
It is necessary that the product is in good condition.
