KoamTac KDC470 UHF Manuale utente

QG_KDC470_UHF_20201014

KDC470/475 UHF

Quick Guide

116 Village Blvd, Suite 305, Princeton, NJ 08540 USA

T: + 1-609-256-4700 F: +1-609-228-4373

info@koamtac.com www.koamtac.com

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p1

Contents

1. Product Introduction.........................................................................................................................................2

1.1 KDC470/475 1.0W UHF Reader Diagram..................................................................................................2

1.2 KDC470/475 0.5W UHF Reader Diagram..................................................................................................3

1.3 How to turn on and off ..............................................................................................................................3

2. Bluetooth Pairing ..............................................................................................................................................4

2.1 Bluetooth Profiles Explained.....................................................................................................................4

2.2 Pairing a KDC470/475 to your smart device .............................................................................................4

2.3 Bluetooth Pairing a KDC470-BLE/475-BLE to your smart device with special barcodes .........................5

3. Usage ................................................................................................................................................................7

3.1 Read RFID tag and Barcode with trigger: Trigger mode..........................................................................7

3.2 Toggling the Read Mode: Barcode mode vs. UHF mode ........................................................................7

3.3 Changing the UHF Read Tag Modes: Single, Multiple, or Active ............................................................8

3.4 UHF Tag Counting (Beep Count)..............................................................................................................9

3.5 Phone Charging Option ..........................................................................................................................10

3.6 Using Keyboard Wedge (HID Keyboard) ................................................................................................10

3.7 Using KTSync – Android/iOS ..................................................................................................................10

3.8 Using KTSync Keyboard – Android .........................................................................................................11

3.9 Using KTSync Keyboard – iOS ................................................................................................................12

3.10 Using “KDCUHF” Application – Android/iOS ........................................................................................13

3.11 Using other Developed Applications with free SDK – Android/iOS ......................................................15

4. Product Specifications ....................................................................................................................................16

4.1 1.0W UHF Reader ....................................................................................................................................16

4.2 0.5W UHF Reader ....................................................................................................................................16

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p2

Product Introduction

The 1.0W and .05W UHF Readers attach to the back of KDC470/475 SmartSled Scanners.

The 1.0W or 0.5W UHF Reader is attached to the back of KDC470/475 SmartSled Scanners.

1.1 KDC470/475 1.0W UHF Reader Diagram

* 1.0W UHF Reader mounted to KDC470

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p3

1.2 KDC470/475 0.5W UHF Reader Diagram

* 0.5W UHF Reader mounted to KDC470

1.3 How to turn on and off

Refer to the figure in section 1.1 or 1.2 to locate the SCAN and DOWN buttons.

a) Press SCAN and DOWN buttons simultaneously for 3 seconds.

b) The KDC will beep when it is turned ON.

* 2017/2018/early 2019 versions of KDC470 turn on upon pressing scan button.

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p4

Bluetooth Pairing

Connecting your KDC using Bluetooth is made easy with the below pairing barcodes. If you are unsure which

profile is right for you, please visit www.koamtac.com for more information.

2.1 Bluetooth Profiles Explained

a. HID Profile: Allows one-way Bluetooth communication with an Android or iOS host

device. The KDC only transmits data to the host device.

b. SPP Profile: Allows two-way Bluetooth communication. The KDC transmits data to the

host device and the host device can transmit data back to the KDC.

c. HID Windows Profile: Allows one-way Bluetooth communication with Windows host

device. The KDC only transmits data to the host device.

Note:HID inputs data directly into an application. SPP requires the KOAMTAC SDK to input data into an

application. To gain access to the SDK, please complete the form here: https://www.koamtac.com/sdk/

2.2 Pairing a KDC470/475 to your smart device

1. Navigate to the Bluetooth setting on the host PC, Mac, Smartphone, or Tablet.

2. Ensure that Bluetooth is enabled on the host device and searching for devices.

3. Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth

profile. If you are unsure which Bluetooth profile is right for you, please refer to the

previous panel.

Android, Mac, Windows: HID Normal

SPP & MFi

iOS: HID iOS

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p5

4. Check the list of available Bluetooth devices on your host device.

5. From the list, select KDC470/475 listed by serial number in brackets that matches the

serial number found on the back side of the KDC470/475.

6. In HID mode, KDC470/475 is now ready to use.

7. To complete connection in SPP/MFi mode, launch KTSync or your application and

select KDC470/475.

* The KDC470/475 will beep when successfully connected.

2.3 Bluetooth Pairing a KDC470-BLE/475-BLE to your smart device with special barcodes

Bluetooth Profile & Pairing

#1. HID-BLE & Pairing (Android, iOS, Mac)

#2. HID-Windows & Pairing (Windows)

#3. SPP-BLE & Pairing (Android, iOS, Mac, Windows)

a. Navigate to the Bluetooth setting on the host device and ensure that Bluetooth is both

enabled and searching for devices.

b. Using the KDC, scan the pairing barcode above that corresponds to your desired

Bluetooth profile. If you are unsure which Bluetooth profile is right for you, please refer

to Chapter section 2.1.

•If you use an Android, iOS, or Mac device and desire an HID connection, then scan

barcode #1 above.

•If you use a Windows device and desire an HID connection, then scan barcode #2

above.

•If you desire an SPP connection for any device, then scan barcode #3 above.

c. In HID or HID Windows Profile, check the list of available Bluetooth devices on your host

device. From the list, select the KDC470-BLE/475-BLE listed by serial number in brackets

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p6

that matches the serial number found on the back side of the KDC470-BLE/475-BLE.

KDC470-BLE/475-BLE will beep upon connection and display “Bluetooth Connected” on

its screen. Now it is ready to use.

d. In SPP Profile for non-iOS, check the list of available Bluetooth devices on your host

device. From the list, select the KDC470-BLE/475-BLE listed by serial number in brackets

that matches the serial number found on the back side of the KDC470-BLE/475-BLE.

KDC470-BLE/475-BLE will beep upon connection and display “Bluetooth Connected” on

its screen, but you should launch KTSync or your application and select KDC470-BLE/475-

BLE within the application to complete the connection. Now it is ready to use.

In SPP Profile for iOS, the KDC is NOT listed on your host device, so you should launch KTSync or your

application and select the KDC470-BLE/475-BLE listed by serial number in brackets that matches the serial

number found on the back side of the KDC470-BLE/475-BLE. KDC470-BLE/475-BLE will beep upon connection

and display “Bluetooth Connected” on its screen. Now it is ready to use.

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p7

Usage

For optimal UHF tag read performance and to ensure that human exposure to RF energy does not exceed the

FCC and European Union guidelines, always follow the instructions and precautions below:

•Before using the KDC470 UHF reader, the user should carefully read this operation guide and user

guide to understand how to use KDC470 UHF reader properly.

•The KDC470 UHF reader should be used by a professional person who fully understands how to

operate the KDC470 UHF reader.

•Maintain at least 20cm (about 8 inches) between the KDC470 UHF reader and the body when reading

UHF RFID tags.

•Keep the KDC470 UHF antenna facing towards the UHF RFID tag. Do not direct the antenna towards

the body when reading UHF RFID tags.

•Exit UHF tag read mode and enter Barcode read mode when finished reading UHF tags.

•Do not wear the KDC470 UHF reader when not using the KDC470 UHF reader.

3.1 Read RFID tag and Barcode with trigger: Trigger mode

In the trigger mode, with the trigger on the pistol grip, you can read barcodes and UHF tags. If you pull trigger

once then KDC470/475 reads RFID tag and pull trigger twice very shortly then KDC470/475 reads barcodes.

The following are barcodes to enable/disable Trigger mode.

Trigger Mode (Enable)

Trigger Mode (Disable)

3.2 Toggling the Read Mode: Barcode mode vs. UHF mode

With the same SCAN button or the trigger on the pistol grip, you can read barcodes (Barcode mode) or UHF

tags (UHF mode) depending on the read mode and you can change the mode alternatively.

a) On “Barcode mode”, a barcode can be read by a SCAN button or trigger button.

b) On “UHF mode”, UHF tags can be read by a SCAN button or trigger button.

c) By default, it is a “Barcode mode” and also it is set back to a “barcode mode” after the factory default.

d) There are two ways to change the read mode:

1) Press and hold the UP button for 3 seconds

2) Change from within the application using SDK

e) When the mode is changed, the KDC will give a series of beeps to confirm the mode change:

When you enter UHF Mode: 1 long and 2 short beeps

When you enter Barcode Mode: 1 long and 1 short beep

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p8

3.3 Changing the UHF Read Tag Modes: Single, Multiple, or Active

This mode only works when the device is in UHF mode. Refer to 3.1 to see how to toggle read modes.

When in UHF Mode, you have the option of scanning in 3 different modes. The modes change in the following

order: Active (default) read -> Single read -> Multiple read. The mode can be changed by pressing the DOWN

button for 2 seconds.

•Single mode: Only one tag is read every time the scan button is pressed.

o1 short beep will occur when changing mode with Down key.

•Multiple mode: When the Scan button is pressed, reads multiple tags simultaneously for the set time

(default 10 seconds).

o2 short beeps will occur when changing mode with Down key.

oTime setting can be changed in Settings ->Reading Timeout.

•Active mode: Basic operation status. Simultaneous reading of multiple tags while pressing the scan

button (max. 10 minutes)

o3 short beeps will occur when changing mode with Down key.

Alternatively, you can scan the special barcodes (page 6) to change the mode. To change from active mode to

another mode, you should disable the active mode first.

Active Mode (Enable)

Active Mode (Disable)

In Active Mode, if the SCAN button or Trigger button is pressed more than 10 minutes, the read mode

automatically changes from UHF Mode to Barcode Mode to save battery life in the case of the trigger being

stuck in the scan position. This option is enabled by default and may be disabled.

Single Mode

Multiple Mode

KDC470/475 UHF

Quick Guide

See Reference Manual for more detailed information.

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC470_UHF_20201014 p9

If you need to scan with the trigger depressed for more than 10 minutes, you need to disable the Active Read

10 Minute Timeout.

Active Read 10 Minute Timeout

Enabled (Default)

Disabled

3.4 UHF Tag Counting (Beep Count)

By setting the Count attribute, you can get an estimate on how many tags are read per beep.

•Count = 0: The device only beeps once when you start reading

•Count = 5: Beeps once every 5 tags read. Example: 2 beeps means you read 10 to 14 tags.

•Count = 10: Beeps once every 10 tags read. Example: 2 beeps means you read 20 to 29 tags.

•Count = 20: Beeps once every 20 tags read. Example: 2 beeps means you read 40 to 59 tags.

•Count = 50: Beeps once every 50 tags read Example: 2 beeps means you read 100 to149 tags.

Scan the barcode on below that corresponds with your preference for Tag Counting.

Count = 0

Count = 5

Count = 10

Count = 20

Altri manuali per KDC470 UHF

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali KoamTac Lettore di codici a barre

KoamTac

KoamTac KDC20 Manuale utente

KoamTac

KoamTac KDC20 Manuale utente

KoamTac

KoamTac KDC 470 Manuale utente

KoamTac

KoamTac KDC450 Manuale utente

KoamTac

KoamTac KDC280 Guida utente

KoamTac

KoamTac KDC380 QG Manuale utente

KoamTac

KoamTac KDC300 Manuale utente

KoamTac

KoamTac KDC20 Manuale utente

KoamTac

KoamTac KDC475 Manuale utente

KoamTac

KoamTac KDC100 Manuale del proprietario

KoamTac

KoamTac KDC300 Manuale utente

KoamTac

KoamTac KDC200 KDC250 Manuale del proprietario

KoamTac

KoamTac KDC30 Manuale utente

KoamTac

KoamTac KDC350 Wi-Fi Manuale utente

KoamTac

KoamTac KDC30 Manuale utente

KoamTac

KoamTac KDC470Ci Manuale utente

KoamTac

KoamTac KDC100 Manuale utente

KoamTac

KoamTac KDC200 KDC250 Manuale utente

KoamTac

KoamTac KDC480 Series Manuale utente

KoamTac

KoamTac KDC180 Manuale utente

KoamTac

KoamTac KDC100M Manuale utente

KoamTac

KoamTac KDC180 QG Manuale utente

KoamTac

KoamTac KDC485ER Manuale utente

KoamTac

KoamTac KDC200 KDC250 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente