Kodak Ektascan 2180 Manuale utente

HEALTH SCIENCES DIVISION

Publication No. 5B9615

OCT95

Supersedes 4B4858

6/94

User’s Manual

for the

Kodak Ektascan 2180 Laser Printer

and the

Kodak X-Omat 180 LP or 180 LPS

Processor

H126_0703AA

-2 5B9615

PLEASE NOTE The information contained herein is based on the experience and

knowledge relating to the subject matter gained by Eastman Kodak

Company prior to publication.

No patent license is granted by this information.

Eastman Kodak Company reserves the right to change this

information without notice, and makes no warranty, express or

implied, with respect to this information. Kodak shall not be liable

Description Page

Table of Contents

Section 1: Safety Information for the Kodak Ektascan 2180

Laser Printer 1-1

Section 2: Printer Overview 2-1

About This Manual 2-2

General Product Overview 2-4

Printer Overview 2-7

Display Screen Overview 2-8

Keypad Overview 2-13

Control Terminal 2-16

Section 3: Basic Operations 3-1

Start-Up and Shutdown 3-2

Selecting Film 3-4

Loading and Unloading Film 3-5

Using the Control Panel 3-23

Section 4: Keypad Functions 4-1

Using the Keypad 4-2

Storing Images and Printing Pages 4-5

Deleting Images or Pages 4-11

Program Options 4-12

Auxiliary Keypad 4-28

Section 5: Control Terminal 5-1

Overview 5-2

The Main Menu 5-3

Image Setup 5-11

Change Destination 5-14

Troubleshooting the Control Terminal 5-14

Section 6: Calibrating the 2180 Laser Printer 6-1

Overview 6-2

Calibrating the 2180 Laser Printer 6-5

5B9615 –3

Section 7: Study Reprinting 7-1

In This Section 7-2

General Information 7-2

Study Reprinting From the Main Control Panel 7-4

Keypad 7-10

Section 8: Troubleshooting and Error Messages 8-1

Troubleshooting 8-2

Film Transport 8-3

Error Messages 8-11

Preventive Maintenance 8-15

How to Contact Service Personnel 8-19

Section 9: Quick Reference Guides 9-1

Section 10: Safety Information for the 180 LP or 180 LPS

Processor 10-1

Section 11: Processor Overview 11-1

Introduction 11-2

General Information 11-2

Control Processor Screen 11-3

Process Information for the 180 LP or 180 LPS Processor 11-6

Processor Configuration and Setpoints 11-7

Using the Access Code 11-8

Processor Setup Access Screen 11-9

Section 12: Mixing the Chemistry 12-1

Section 13: Setting Up the Processor 13-1

Processor Configuration 13-2

Selecting a Replenishment Mode 13-3

Calibrating the Replenishment System 13-10

Changing Setpoints 13-14

Standby Mode 13-18

Display Units 13-18

Section 14: Operating Instructions 14-1

Start-Up 14-2

Adjusting Dryer Temperature 14-4

Shutdown 14-5

Section 15: Preventive Maintenance 15-1

Overview 15-2

Weekly 15-3

Monthly 15-8

Section 16: Using a 21-Step Gray Scale for Processor

Quality Assurance 16-1

Overview 16-2

Printing the 21-Step Gray Scale 16-2

Setting Up the Kodak Process Control Densitometer 16-3

User’s Manual

–4 5B9615

Entering Density Data into the Kodak Process Control

Densitometer 16-4

Items Needed for Processor Quality Assurance 16-6

Establishing the Baseline 16-7

Determining the Speed Index 16-8

Determining the Base+Fog Value 16-8

Determining the Customer Upper Density Point 16-8

Developer Temperature 16-9

Establishing Operating Limits 16-9

Daily Processor Quality Assurance 16-9

Evaluating the Control Chart 16-10

Crossover Procedure 16-10

Final Comments 16-11

Section 17: Kodak X-Omat 180 LP or 180 LPS Sorter Kit 17-1

Introduction 17-2

General Information 17-2

Using the Control Panel 17-4

Clearing Film Jams 17-8

Sorter Error Messages Displayed on the Display Screen

of the Laser Printer 17-12

Section 18: Appendix 18-1

Appendix A - Setting Up Supply Magazines 18-2

Appendix B - Folding the Reusable Plastic Carrier

Board 18-10

Appendix C - Warranty Statement for the Processor 18-12

Appendix D - Processor Menu Flowchart 18-14

Appendix E - Processor Error Messages 18-15

Section 19: Glossary 19-1

Section 20: Index 20-1

Section 21: Publication History 21-1

Safety Information for the Kodak Ektascan 2180 Laser Printer

5B9615 1–1

Section 1: Safety Information for the Kodak Ektascan 2180

Laser Printer

Read and understand all instructions before using.

The Kodak Ektascan 2180 Laser Printer is a Class I device. This means that for

protection of the user against electrical shock, this device relies on a proper ground

connection as outlined in the Site Specifications for the Kodak Ektascan 2180 Laser

Printer.

Warning

This device has not been designed for:

• direct patient contact.

It must not be used within an eight foot radius of an immobilized patient.

• use in an explosive environment.

It must not be used in areas where explosive gases or vapors are present.

Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

Caution

This device is intended for use only by professional, trained personnel.

Because the imaging sections of laser printers (imagers) are designed

differently, the printed image size displayed on film (media) will differ

among models of laser printers. External measuring devices such as

templates, scales, rulers, or reference point charts used for charting

anatomical locations or measuring point to point should not be used in the

diagnosis or treatment of patients unless differences among the printed

image sizes of laser printers has been taken into consideration.

User’s Manual

1–2 5B9615

Note

Noise Emission is less than 70 dBA.

Warning

DANGER, AVOID LASER BEAM. THIS EQUIPMENT USES A VISIBLE RED

LASER.LASER RADIATION CAN BE PRESENT WHEN THE MACHINE IS

OPERATED WITH THE PANELS OFF AND THE INTERLOCKS DEFEATED.

AVOID DIRECT EXPOSURE TO THE LASER BEAM.

DANGER, HIGH VOLTAGE.

This equipment is operated with hazardous voltage which can shock, burn, or cause

death. Remove the wall plug before servicing equipment. Never pull the cord from

the outlet. Grasp the plug and pull to disconnect. DO NOT operate equipment with

a damage power cord. Position the power cord so that it will not be tripped over or

accidentally pulled.

H126_2719AC

DANGER

Laser radiation when open

and interlocks defeated

Avoid direct exposure

to beam

Safety Information for the Kodak Ektascan 2180 Laser Printer

5B9615 1–3

Caution

DO NOT use an extension cord to power the Laser Printer. Connect this equipment

to a grounded outlet. Refer to the Site Specifications for the Kodak Ektascan 2180

Laser Printer and the Kodak X-Omat 180 LP or 180 LPS Processor for additional

details.

This equipment generates, uses, and can radiate radio frequency energy and if not

installedandusedinaccordancewiththeinstructionmanual,maycauseinterference

with radio communications. It has been tested and found to be exempt from the

limits for a Class A computing device pursuant to Part 15, Subpart J of FCC Rules,

which are designed to provide reasonable protection against such interference when

operated in a commercial environment. Operation of this equipment in a residential

environment is likely to cause interference, in which case the user, at the user’s own

expense, will be required to take whatever measures may be required to correct the

interference.

User’s Manual

1–4 5B9615

This device complies with the RFI requirements of VDE 0871, Class B.

THIS PRODUCT COMPLIES WITH 21 CFR CHAPTER 1,

220/230/240 6A

60 Hz

50 Hz

120V 12A

12A

60 Hz

Rochester, New York 14650

EASTMAN KODAK COMPANY

Made in U.S.A. by

115V 12A50/60 Hz

100V

SUBCHAPTER J.

DE L’ELECTR:CITE SEULEMENT.

CODE/CERTIFIE EN VERTU DU CODE CANADIAN

CERTIFIED ONLY TO CANADIAN ELECTRICAL

MANUFACTURED

3230

NUMBER

SERIAL

CODE

SERVICE

EKTASCAN 2180 Laser Printer

KODAK

3230

32303230

LISTED 115B

MGA

963877

H126_2712CC

Safety Information for the Kodak Ektascan 2180 Laser Printer

5B9615 1–5

H126_0722DC

to beam

Avoid direct exposure

and interlocks defeated

Laser radiation when open

DANGER

963877

MGA

115B

LISTED

32303230

3230

KODAK

EKTASCAN 2180 Laser Printer

SERVICE

CODE SERIAL

NUMBER

3230

MANUFACTURED

CERTIFIED ONLY TO CANADIAN ELECTRICAL

CODE/CERTIFIE EN VERTU DU CODE CANADIAN

DE L’ELECTR:CITE SEULEMENT.

SUBCHAPTER J.

100V 50/60 Hz 12A

115V

Made in U.S.A. by

EASTMAN KODAK COMPANY

Rochester, New York 14650

60 Hz 12A

12A

120V 50 Hz

60 Hz 6A

220/230/240

THIS PRODUCT COMPLIES WITH 21 CFR CHAPTER 1,

User’s Manual

1–6 5B9615

Cleaning and Sterilization:

The Kodak Ektascan 2180 Laser Printer is not to be cleaned by immersion nor sterilized

by autoclaving. Do not wash in a manner allowing fluid to flow freely over the external

services. To properly sterilize or clean:

• power down the unit.

• immerse a clean, soft cloth in an appropriate non-abrasive, non-corrosive sterilizing

or cleaning solution.

• wring cloth to remove excess fluid.

• wipe the external surfaces free of soil.

Exercise caution around openings and electrical connections. When soil is removed,

wipe external surfaces dry with clean or sterile soft cloth.

Responsibility of the Manufacturer:

The manufacturer is responsible for the effects on safety, reliability, and performance of

the Kodak Ektascan 2180 Laser Printer only if:

• assembly operations, extensions, readjustments, modifications or repairs are carried

out by persons authorized by the manufacturer.

• the electrical installation of the relevant room complies with the appropriate

requirements.

• the Kodak Ektascan 2180 Laser Printer is used in accordance with the instructions

for use.

Note

Please refer to the Kodak Ektascan 2180 Laser Printer and Kodak X-Omat 180 LP or 180

LPS Processor site specifications for installation and site preparation information.

Altri manuali per Ektascan 2180

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Kodak Stampante

Kodak

Kodak Photo Printer 6850 Manuale utente

Kodak

Kodak 1400 Guida

Kodak

Kodak Versamark DS9100 Guida

Kodak

Kodak Versamark VT3000 Manuale utente

Kodak

Kodak Smile Manuale utente

Kodak

Kodak Professional ML-500 Guida

Kodak

Kodak EasyShare Series 3 Manuale utente

Kodak

Kodak Guidelines 3000 series Manuale utente

Kodak

Kodak VERITÉ 50 Eco Manuale utente

Kodak

Kodak Ektascan 1120 Manuale utente

Kodak

Kodak Printe Manuale utente

Kodak

Kodak Versamark DS9100 Guida

Kodak

Kodak EasyShare printer dock Manuale utente

Kodak

Kodak Printer Manuale utente

Kodak

Kodak EasyShare Photo Printer 500 Manuale utente

Kodak

Kodak 9810 - PRINTING IMAGES FROM PHOTOSHOP 7 AND... Manuale utente

Kodak

Kodak DryView 6800 Manuale utente

Kodak

Kodak EasyShare Printer Dock Plus Series 3 Manuale utente

Kodak

Kodak 8657 Manuale utente

Kodak

Kodak EasyShare G600 Manuale utente

Kodak

Kodak Smile Manuale utente

Kodak

Kodak DryView 6800 Manuale utente

Kodak

Kodak Color Ease PS Printer Manuale utente

Kodak

Kodak RP 50 2J0686 Manuale

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente